bugzilla-daemon at freedesktop.org
2016-Apr-05 08:51 UTC
[Nouveau] [Bug 94826] New: Cannot set external display as primary in optimus mode
https://bugs.freedesktop.org/show_bug.cgi?id=94826
Bug ID: 94826
Summary: Cannot set external display as primary in optimus mode
Product: xorg
Version: unspecified
Hardware: x86-64 (AMD64)
OS: Linux (All)
Status: NEW
Severity: normal
Priority: medium
Component: Driver/nouveau
Assignee: nouveau at lists.freedesktop.org
Reporter: pkolaczk at gmail.com
QA Contact: xorg-team at lists.x.org
I have a Dell M4600 laptop with an external display attached to display port.
DP is wired to nvidia chip in this laptop.
With optimus disabled in bios setup, both displays work fine using Nvidia chip
and the external screen can be marked as primary and behaves as primary.
Unfortunately in this mode, 2D performance is quite bad, to the point it is
hardly usable. I guess this is due to power management problems that I know are
being worked on, but please confirm yo know about it and I don't need to
file a
separate bug for this.
After enabling optimus in bios, both displays work fine using Intel chip, the
DP connection is detected properly and nvidia chip powers up to enable DP. 2D
performance is smooth and usable. However, setting the external display as
primary is not possible with xrandr:
Screen 0: minimum 8 x 8, current 4480 x 1600, maximum 32767 x 32767
LVDS1 connected primary 1920x1080+0+365 (normal left inverted right x axis y
axis) 344mm x 194mm
1920x1080 59.9*+ 59.9 39.9
1680x1050 60.0 59.9
1600x1024 60.2
1400x1050 60.0
1600x900 60.0
1280x1024 60.0
1440x900 59.9
1280x960 60.0
1368x768 60.0
1360x768 59.8 60.0
1152x864 60.0
1280x720 60.0
1024x768 60.0
1024x576 60.0
960x540 60.0
800x600 60.3 56.2
864x486 60.0
640x480 59.9
720x405 60.0
640x360 60.0
VGA1 disconnected (normal left inverted right x axis y axis)
VIRTUAL1 disconnected (normal left inverted right x axis y axis)
DP-1-1 connected 2560x1600+1920+0 641mm x 401mm
2560x1600 60.0*+
1920x1440 60.0
1920x1200 59.9
1920x1080 60.0 50.0 59.9 24.0 24.0
1920x1080i 60.1 50.0 60.0
1600x1200 60.0
1280x1024 75.0 60.0
1280x800 59.8
1152x864 75.0
1280x720 60.0 50.0 59.9
1024x768 75.1 60.0
800x600 75.0 60.3
720x576 50.0
720x576i 50.1
720x480 60.0 59.9
720x480i 60.1 60.1
640x480 75.0 60.0 59.9
720x400 70.1
DP-1-2 disconnected
DP-1-3 disconnected
1280x1024 (0x52) 108.0MHz
h: width 1280 start 1328 end 1440 total 1688 skew 0 clock 64.0KHz
v: height 1024 start 1025 end 1028 total 1066 clock 60.0Hz
1024x768 (0x59) 65.0MHz
h: width 1024 start 1048 end 1184 total 1344 skew 0 clock 48.4KHz
v: height 768 start 771 end 777 total 806 clock 60.0Hz
800x600 (0x5b) 40.0MHz
h: width 800 start 840 end 968 total 1056 skew 0 clock 37.9KHz
v: height 600 start 601 end 605 total 628 clock 60.3Hz
640x480 (0x64) 25.2MHz
h: width 640 start 656 end 752 total 800 skew 0 clock 31.5KHz
v: height 480 start 490 end 492 total 525 clock 59.9Hz
pkolaczk at m4600 ~ $ xrandr --output LVDS1 --noprimary
pkolaczk at m4600 ~ $ xrandr --verbose --output DP-1-1 --primary
crtc 3: 2560x1600 60.0 +1920+0 "DP-1-1"
X Error of failed request: BadMatch (invalid parameter attributes)
Major opcode of failed request: 140 (RANDR)
Minor opcode of failed request: 30 (RRSetOutputPrimary)
Serial number of failed request: 45
Current serial number in output stream: 47
Xorg.log.0 entries added during the last xrandr command:
[ 2392.882] (II) NOUVEAU(G0): EDID vendor "DEL", prod id 16485
[ 2392.883] (II) NOUVEAU(G0): Using hsync ranges from config file
[ 2392.883] (II) NOUVEAU(G0): Using vrefresh ranges from config file
[ 2392.883] (II) NOUVEAU(G0): Printing DDC gathered Modelines:
[ 2392.883] (II) NOUVEAU(G0): Modeline "2560x1600"x0.0 268.50 2560
2608 2640
2720 1600 1603 1609 1646 +hsync -vsync (98.7 kHz eP)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1920x1080"x0.0 148.50 1920
2008 2052
2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1920x1080i"x0.0 74.25 1920
2008
2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1280x720"x0.0 74.25 1280
1390 1430
1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "720x480"x0.0 27.00 720 736
798 858
480 489 495 525 -hsync -vsync (31.5 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "800x600"x0.0 40.00 800 840
968 1056
600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "640x480"x0.0 31.50 640 656
720 840
480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "640x480"x0.0 25.18 640 656
752 800
480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "720x400"x0.0 28.32 720 738
846 900
400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1280x1024"x0.0 135.00 1280
1296 1440
1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1024x768"x0.0 78.75 1024
1040 1136
1312 768 769 772 800 +hsync +vsync (60.0 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1024x768"x0.0 65.00 1024
1048 1184
1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "800x600"x0.0 49.50 800 816
896 1056
600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1152x864"x0.0 108.00 1152
1216 1344
1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1280x800"x0.0 83.50 1280
1352 1480
1680 800 803 809 831 -hsync +vsync (49.7 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1280x1024"x0.0 108.00 1280
1328 1440
1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1600x1200"x0.0 162.00 1600
1664 1856
2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1920x1200"x0.0 193.25 1920
2056 2256
2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1920x1440"x0.0 234.00 1920
2048 2256
2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "720x576"x0.0 27.00 720 732
796 864
576 581 586 625 -hsync -vsync (31.2 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1440x480i"x0.0 27.00 1440
1478 1602
1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1440x240"x0.0 27.00 1440
1478 1602
1716 240 244 247 262 -hsync -vsync (15.7 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1440x288"x0.0 27.00 1440
1464 1590
1728 288 290 293 312 -hsync -vsync (15.6 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1280x720"x0.0 74.25 1280
1720 1760
1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1440x576i"x0.0 27.00 1440
1464 1590
1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1920x1080i"x0.0 74.25 1920
2448
2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1920x1080"x0.0 74.25 1920
2558 2602
2750 1080 1084 1089 1125 +hsync +vsync (27.0 kHz e)
[ 2392.883] (II) NOUVEAU(G0): Modeline "1920x1080"x0.0 74.25 1920
2448 2492
2640 1080 1084 1089 1125 +hsync +vsync (28.1 kHz e)
[ 2393.008] reporting 5 6 58 473
Hardware:
pkolaczk at m4600 ~ $ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core
Processor Family Integrated Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108GLM [Quadro 1000M]
(rev a1)
Software:
Kernel:
Linux m4600 4.5.0-040500-generic #201603140130 SMP Mon Mar 14 05:32:22 UTC 2016
x86_64 x86_64 x86_64 GNU/Linux
Also tried 4.6.0-rc2 generic from kernel-ppa/mainline, same results.
xserver-xorg-video-nouveau: 1:1.0.12+git1603170734.b824d3~gd~t
Also tried an older version 1:1.0.11 and the problem was present.
intel i915 driver:
[ 6.831] (II) intel(0): Using Kernel Mode Setting driver: i915, version
1.6.0 20151218
[ 6.831] (II) intel(0): SNA compiled: xserver-xorg-video-intel
2:2.99.917+git1604040733.90792c~gd~t (Oibaf <fmrummey at gmail.com>)
X.Org X Server 1.15.1
Release Date: 2014-04-13
--
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://lists.freedesktop.org/archives/nouveau/attachments/20160405/8d7f559c/attachment.html>
bugzilla-daemon at freedesktop.org
2019-Dec-04 09:11 UTC
[Nouveau] [Bug 94826] Cannot set external display as primary in optimus mode
https://bugs.freedesktop.org/show_bug.cgi?id=94826
Martin Peres <martin.peres at free.fr> changed:
What |Removed |Added
----------------------------------------------------------------------------
Status|NEW |RESOLVED
Resolution|--- |MOVED
--- Comment #1 from Martin Peres <martin.peres at free.fr> ---
-- GitLab Migration Automatic Message --
This bug has been migrated to freedesktop.org's GitLab instance and has been
closed from further activity.
You can subscribe and participate further through the new bug through this link
to our GitLab instance:
https://gitlab.freedesktop.org/xorg/driver/xf86-video-nouveau/issues/260.
--
You are receiving this mail because:
You are the assignee for the bug.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<https://lists.freedesktop.org/archives/nouveau/attachments/20191204/ac3a6702/attachment.html>