search for: hfcmulti

Hi, I'd like to know what's the most "popular" method for automatic fax/voice detection for incoming calls on mISDN cards such as the B410P (hfcmulti). I'm running: kernel 2.6.17 misdn 1.1.3 asterisk 1.4.21.2 B410P card I'm using iaxmodem and hylafax with asterisk (the setup works for zap channels). I've used the following options in /etc/asterisk/misdn.conf: [MY-ISDN] context=isdn-custom ports=1,2,3,4 msns=* faxdetect=both faxdete...

...From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users- -->> bounces at lists.digium.com] On Behalf Of Vieri -->> Sent: 06 February 2009 12:40 -->> To: asterisk-users at lists.digium.com -->> Subject: Re: [asterisk-users] Incoming fax detection on mISDN hfcmulti -->> B410Pcard -->> -->> -->> --- On Thu, 2/5/09, Ex Vito <ex.vitorino at gmail.com> wrote: -->> -->> > App nvfaxdetect() works fine for that purpose on both Zap -->> > and mISDN. -->> > See http://www.voip-info.org/wiki-NVF...

...:01:0e.0: new card sync source: port 1 and "pri show spans" mostly (but not always) report worrying status: PRI span 1/0: Down, Active PRI span 2/0: In Alarm, Down, Active On the first box "pri show spans" constantly reports the line is up. On thing to note is I had to forbid hfcmulti in modprobe.d in the second box to comply with a warning from dahdi. Without that, I could see this line in the output of lsmod: mISDN-core

Hi, a few month ago, I tried to install zaptel for my Beronet BN8S0 pci card... I gave up and took hfcmulti/lcr. Now dahdi (2.2.1.1) seems to support the card and I'm very interested to get it to work. But how to get rid of these annoying qozap driver? bishop dahdi # lspci -v -nn -s 01:00.0 01:00.0 ISDN controller [0204]: Cologne Chip Designs GmbH ISDN network Controller [HFC-8S] [1397:16b8] (rev...

...emory mapped IO after the kernel recompilation and the reboot i build and install mISDNuser with make and make install. The card is recognized by the system, this is the output of lspci: 00:0d.0 ISDN controller: Cologne Chip Designs GmbH ISDN network Controller [HFC-8S] (rev 01) and i can load hfcmulti and mISDN_dsp without problems... all channels are configured in TE mode, i use this modprobe: /sbin/modprobe hfcmulti layermask=0xf,0xf,0xf,0xf,0xf,0xf,0xf,0xf protocol=0x2,0x2,0x2,0x2,0x2,0x2,0x2,0x2 type=0x08 /sbin/modprobe mISDN_dsp and this is the output of dmesg: Modular ISDN Stack core $R...

...idea) Now the problem, if I run /etc/init.d/misdn-init start I get the following: /etc/init.d/misdn-init: line 91: [: 5: unary operator expected ----------------------------------------- Loading module(s) for your misdn-cards: ----------------------------------------- modprobe --ignore-install hfcmulti type= protocol=,,, layermask=0x3,0x3,0x3,0x3 poll=128 debug=0xf De output of the lsmod | grep hfcmulti command is hfcmulti 74984 0 mISDN_core 85248 6 mISDN_dsp,mISDN_capi,l3udss1,mISDN_l2,mISDN_l1,hfcmulti The output of dmesg | grep Digium is [42949387.380000] HFC-M...

I'm using avm fritz card usb with kernel 2.6 patch with mISDN. The module is load correctly when I type lsmod I've got the following output: Module Size Used by zaptel 178308 0 avmfritz 21388 0 mISDN_isac 14336 1 avmfritz mISDN_dsp 191424 0 l3udss1 34184 0 mISDN_l2 39040 0

Hi i am experiencing some problem with asterisk and misdn i've patched and recompiled the 2.6.15.5 kernel on the server i use a BN8S0 card with alla channels in TE mode. i can load hfcmulti and mISDN_dsp i load this with: /sbin/modprobe hfcmulti layermask=0xf protocol=0x22 type=0x08 and then /sbin/modprobe mISDN_dsp dmesg returns me the following: Modular ISDN Stack core $Revision: 1.34 $ mISDNd: kernel daemon started mISDNd: test event done mISDN: HFC-multi driver Rev. 1.40 0 devic...

...the 2 cards I have, /etc/init.d/misdn-init --config prepare me the misdn.conf and after a /etc/init.d/misdn-init start I see: mISDN_dsp 191656 0 mISDN_capi 88716 0 mISDN_l2 34452 0 mISDN_l1 11036 0 mISDN_core 71360 6 mISDN_dsp,hfcmulti,mISDN_capi,l3udss1,mISDN_l2,mISDN_l1 kernelcapi 44576 2 mISDN_capi,capi My questions: why Asterisk doesn't want to let me activate the misdn channel? Is misdn ready for 1.4? Thanks for any hint -- Daniel

Hi, I have a Digium B410P 4-port BRI card. I installed misdn 1.1.3 with hfcmulti driver and misdnuser 1.1.3. I configured the card "correctly" as misdnportinfo reports: # misdnportinfo Port 1: TE-mode BRI S/T interface line (for phone lines) -> Interface is Poin-To-Point. -> Protocol: DSS1 (Euro ISDN) -> childcnt: 2 -------- Port 2: TE-mode BRI S/T in...

Dear all, I know this is more a Digium hardware than an Asterisk issue. Already posted a question at Digium, however also like to see whether anyone in the Asterisk community has encountered the following situation: I installed a Digium B410P BRI PCI card on my new asterisk server, following the steps specified in the manual. I can see the PCI card is available using the lspci command: ...

Hi, i use an BN4S0 with misdn an asterisk on Linux 2.6.9. The hfcmulti module is loaded with option: type=0x04 protocol=0x2,0x2,0x22,0x2 layermask=0xf,0xf,0xf,0xf and the fourth port is connected to an ISDN PTMP (MSN) port. Call to #72 from S0 (BN port 4) are not accepted from asterisk but why ? Can anyone give me a hint ?? misdn debug messages follows: lib:...

Your Zap conf files would be helpful. Zttest results? Cat /proc/interrupts. Sharing interrupts? Any funky error in the logs? Thanks, Steve Totaro http://www.asteriskhelpdesk.com > -----Original Message----- > From: asterisk-users-bounces@lists.digium.com [mailto:asterisk-users- > bounces@lists.digium.com] On Behalf Of Administrator TOOTAI > Sent: Thursday, May 10, 2007 6:24 AM

Hi. I'm having problems with chan_mISDN configuration. Line "echotraining=yes" causes warning, when Asterisk is parsing misdn.conf and I'm confused why the PBX doesn't accept the setting. No matter which section I try to offer it, it is always invalid or out of range. The setting itself is supposed to be valid, it is in the sample configuration file of chan_mISDN 0.3.1.

...nk DOWN L1Link:DOWN Blocked:0 Debug:0 I've tried configuring the Ports on the BRI card to be in both TE and NT Mode (as shown above) as well as using link=ptp or ptmp in the mISDN.conf file: <mISDNconf> <module poll="128" debug="0" timer="no">hfcmulti</module> <module debug="0" options="0">mISDN_dsp</module> <devnode user="root" group="root" mode="644">mISDN</devnode> <card type="BN4S0"> <port mode="nt&q...

...I/O ports at 0170 I/O ports at 0374 I/O ports at 08b0 00:0f.3 ISA bridge: Broadcom GCLE-2 Host Bridge Subsystem: Broadcom Unknown device 0230 Flags: bus master, medium devsel, latency 0 # lsmod Module Size Used by mISDN_dsp 183464 0 hfcmulti 61548 0 mISDN_capi 75436 0 l3udss1 29788 0 mISDN_l2 28628 0 mISDN_l1 8444 0 mISDN_core 55424 6 mISDN_dsp,hfcmulti,mISDN_capi,l3udss1,mISDN_l2,mISDN_l1 wcte12xp 30016 0 xpp 43560...

...t NOT useable for PBX (maybe there is already a PBX running?) -------- I do: etc/misdn-init.conf card=1,hfcpci card=2,hfcpci card=3,hfcpci card=4,hfcpci te_ptmp=1,2 nt_ptp=3,4 --- etc/misdn.conf <mISDNconf> <module poll="128" debug="0" timer="no">hfcmulti</module> <module debug="0" options="0">mISDN_dsp</module> <devnode user="asterisk" group="asterisk" mode="660">mISDN</devnode> <card type="hfcpci"> <port mode="te" link=&...

...o IRQ 0 Region 0: I/O ports at 2000 [size=8] Region 1: Memory at b1a00000 (32-bit, non-prefetchable) [size=4K] Capabilities: [40] Power Management version 2 Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Kernel modules: hfcmulti I've tried some combinations of pci=noacpi, noacpi, noapic, acpi=nopci and some others. Doesn't seem to do anything, I still get "0 devices registered" on dmesg. OS: Debian Lenny, kernel 2.6.26. Anyone has any idea of what I can do to fix/further debug this issue? Thanks in ad...

Hi, Until now I've been using my Digium B410P cards with misdn 1.0.x. I would like to upgrade my systems and am now wondering which is the "best" route to take: - use the latest release of misdn v1 - upgrade to the latest "stable" kernel and use the built-in misdn v2 - use misdn v2 as a seperate package (disable misdn in the kernel) - use dahdi's support for misdn

...e in file channels/misdn/isdn_lib.c misdn-init start output: dip01:/mnt/externfs/beronet/install-misdn-mqueue/mISDN-1_1_4# misdn-init start ----------------------------------------- Loading module(s) for your misdn-cards: ----------------------------------------- /sbin/modprobe --ignore-install hfcmulti type=0x1 protocol=0x12,0x22 layermask=0x3,0xf poll=128 debug=0x88 /sbin/modprobe mISDN_dsp debug=0x0 options=0 poll=160 dtmfthreshold=100 dmesg related output: Modular ISDN Stack core version (1_1_4) revision ($Revision: 1.40 $) mISDNd: kernel daemon started (current:c2c2bac0) ISDN L1 driver vers...