search for: halds

Hi ALL, Short description of my problem: I am not able to make wireless network working on the IBM ThinkPad T43p. System: T43p OS: CentOS 4.4 kernel: 2.6.9-34.EL firmware: ipw2200-firmware-3.0-3.nodist.rf.noarch.rpm What did I do ? - installed firmware from RPM package - removed kernel driver (/sbin/rmmod ipw2200) - installed kernel module (/sbin/modprobe ipw2200) dmesg output:

Hi, today I updated the glibc packages on some CentOS machines. After the Update I checked which services/processes I have to restart "yum -C ps" or "needs-restarting" At the most machines I get no information about necessary restarts, but at two machines a long listing : 1 : /sbin/init 386 : /sbin/udevd-d 659 : /sbin/udevd-d 999 : /usr/sbin/vmtoolsd 1103 : auditd 1128 :

No manpage or other info in the system about the hald or hal. What little I did find on a RH site did not really enlighten me that much. Is there some obscure documentation somewhere about the hald and its assets and attributes? -- Snowman

Hi, I haven't tried the code yet. Is there a way to parse this data using R and create bar plots so that each program's 'RAM used' figures are grouped together. So 'uuidd' bars will be together. The data will have about 50 sets. So if there are 100 processes each will have about 50 bars. What is the recommended way to graph these big barplots ? I am looking

Ladies and Gentlemen, I have been playing around with Arnaud's new HAL stuff a bit, and have some questions and observations. First my configuration: my UPS (Peter may remember): ups.mfr: APC ups.model: Back-UPS ES 650 ups.productid: 0002 ups.firmware: 818.w1.D ups.firmware.aux: w1 kernel: 2.6.18-92.1.6.el5 hal-0.5.8.1-35.el5, nut based on nut-2.2.2.tar.gz, small changes to

The hald daemon is the second largest consumer of CPU time on my CentOS v4.3 system. Is there a way to determine what it is spending all this time on? Thanks.

some notes: - for this kind of discussion, please cc upsdev list (I've added it), - I've fwded the full thread to upsdev, - this subject is part of what I call NUT-NG (next gen.), aka nut 3.0... - I'll study in depth the thread this week end, and complete with my thoughts, - thanks to Stan to have put us all in touch Arnaud 2006/3/10, Stanislav Brabec <sbrabec@suse.cz>: >

Env : redhat ES 4 Dell 2900 When i boot up the xen kernel 2.6.16.29 the haldaemon segfaults after it is started Kernel: hald[5313]: segfault at ... error 4 Any ideas ? _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

R users   Thanks in advance:   I need to use the function "mle.cp" in R.  When I run this function I recive   result <- mle.cp(y.hald~x.hald) Error: could not find function "mle.cp"  could some one  give me a help?   thanks [[alternative HTML version deleted]]

I tried creating a new partition on a disk. After the partition table was written, I got a message about the kernel still using the old partition table. How do I get whatever system to register the new partition short of rebooting the box?

I bought a new CyberPower CP850AVRLCD ups, connected it to a usb port and I'm trying to use it with hal. I installed [root at phoenix ~]# rpm -q nut nut-client nut-2.2.0-6.1.fc8 nut-client-2.2.0-6.1.fc8 lsusb sees it: [root at phoenix docs]# lsusb Bus 001 Device 001: ID 0000:0000 Bus 005 Device 002: ID 0c45:1050 Microdia Bus 005 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000

Hi All, I've been trying to trace the cause of a hang on a 5.6 i386 system. After running for almost a year, it hung last week, when I plugged in a screen it was blank, machine was unresponsive to the keyboard, over the network ssh and other daemons didn't respond but the thing has two network cards and routing from one to the other was still working. So the kernel was up and I

USB sticks and cameras used to pop right up on my desktop. Now they don't. I've checked the Gnome "Drives and Media Preferences" and nothing has changed -- I have "Mount removable media when inserted" etc. (Tried toggling it off and back on, no effect.) I've logged out and back in, even rebooted. /var/log/messages shows the devices are being recognized by udev:

Greets all; I was just booted to mdv-2010-x64 where I found my lack of sound problems. Whoopy ding... But when I rebooted to fedora, now the driver cannot disconnect and gain access to the ups. I installed the 52-nut udev file in /etc/udev.d, and it reads that it should setup /dev/hiddev0 like this and with 0664 perms when it finds that ups: crw-rw-r-- 1 root nut 180, 0 2010-01-03 20:51

On Feb 1, 2008 6:11 PM, Arnaud Quette <aquette at alioth.debian.org> wrote: > Author: aquette > Date: Fri Feb 1 23:11:33 2008 > New Revision: 1264 > > Log: > fix HAL support installation [Alioth Bug #304156] Arnaud, I tried to fix some of the errors that I was seeing in buildbot, but I still get the following error on "make distcheck", and I don't know how

On 5/23/07, Kjell Claesson <keyson-guest at alioth.debian.org> wrote: > Author: keyson-guest > Date: Wed May 23 21:12:51 2007 > New Revision: 915 > > Log: > - Enabled requested Alarm function in bcmxcp.c > > Modified: > trunk/ChangeLog > trunk/drivers/bcmxcp.c Looks like this breaks when HAL is enabled. At the end of:

Hello all. I just updated my machine from 9-STABLE to 10-Stable today. beasty ~ # uname -a FreeBSD beasty.schavemaker2.local 10.0-BETA3 FreeBSD 10.0-BETA3 #0 r258543: Mon Nov 25 13:23:31 CET 2013 root at beasty.schavemaker2.local:/usr/obj/usr/src/sys/KRNL amd64 After a reboot, the console gets cluttered with a lot of messages. ata2: FAILURE - zero length DMA transfer attempted ata2: setting

Hi, I got this error when starting a domU on Centos 5.1 i386, Device 0 (vif) could not be connected. Hotplug scripts not working. Why is this happening ? I should restart the machine to see if this still happends after a fresh network bridge. But it's somehow a production server, I would like not to restart it, if possible. No domU is currently running. I could start domUs a week ago.

Hi Folks, Struggling with a new * installation with 2 Rhino R2T1 cards. For some reason, the system is locking up tight when you run ztcfg to configure the card(s). Configuration is asterisk 1.2.14, zaptel 1.2.12, and rhino's 1.05rxt1 drivers. The cards seem to load fine with a "modprobe rxt1", but once you run "ztcfg -vvv", the system will lock up within a few seconds, no

Hi, I was fooling around with the bcmxcp driver and enabling the alarm functions. I hade tested this on some of the ups'es so I was planning to submit it to the svn trunk. But, as the bcmxcp is shared code for serial and usb I got a problem. When enabling --with-hal it halt on the build of hald-addon-bcmxcp_usb. -------------------------------------------------------------- gcc