search for: gw2

...ation. If I do equal trimming at both tail of distribution that I chose, I will use the first ssd formulae which is "a". But if I am doing unequal trimming, then I will be using "b". My problem is I dont know how to come out with a value of ssdw. For example, if the value of gw1=gw2 (which mean equal trimming), the result will come out as "a" not the value of ssdw when equal trimming is done. I f anyone could with this, I really appreciate it. I need the value of ssdw so that I can proceed with computing the F test. Thanks. Regards, Hyo Min UPM Malaysia n1<-15...

...th nat VPN with nat eth0 200.244.10.1 eth0 200.244.10.2 ---- ---- ----- ------ eth1 10.10.1.1 gw1 eth1 10.10.1.254 gw2 I have created the following route-map echo 100 gw2 >> /etc/iproute2/rt_tables ip route add default via 10.10.1.254 table gw2 proto static ip rule add from 10.10.1.5 table gw2 Where 10.10.1.5 is my computer. Public IP address are ficticious. With this configuration my PC going out to...

...low these. 192.168.1.x / 24 (Client groups) | 192.168.1.1 (eth1) (GW1) 202.44.34.206 (eth0) || Internet || 202.44.45.14 (eth0) (GW2) 192.168.2.1 (eth1) | 192.168.2.x/24 ( Client groups) I use Red Hat 6.2 Kernel 2.2.14 and Tinc version 1.0pre3. My problem is " Client in GW1 can't pass through Client in GW2" but Client in GW1 can ping GW2 and inverse too" Anybody who kn...

Hi all! I''ve got 2 (soon 3) internet connection. 1 - via ADSL, 2(and3) via ppp My network: http://desima.objectis.net/network-diag linux1: user1.user2 eth0=192.168.1.1 ppp0=192.168.5.2( gw 192.168.5.1) gw=192.168.1.2 ( thru ADSL) compA=192.168.1.6 compB=192.168.1.15 gw2=192.168.1.217 via ppp to different ISP All works for compA and CompB, user1 should use default gw(192.168.1.2) user2 should use ppp0 For user2 it will work only if I change his route thru gw2(not ppp0): iptables -A OUTPUT -t mangle -m owner --uid-owner 1006 -j MARK --set-mark=0x1 ip rule add...

Cristian and Alex, Both of you have asked about this. A routing table can only have one default route so when the second link comes up, adding the second default route will fail. So in general, Shorewall can only reliably detect the gateway for P-T-P connections which is what the CVS current code does. -Tom -- Tom Eastep \ Nothing is foolproof to a sufficiently talented fool Shoreline, \

...Communications version 1.2.27 daemon and client. Additionally, ssh between the two hosts itself works perfectly. Here is a log of what happens on the sender: $ scp -v -v -v foo.bar xxxxxxxx: Executing: program /usr/local/openssh/bin/ssh host xxxxxxxx, user (unspecified), command scp -v -t . gw2 at xxxxxxxx's password: stty: standard input: Invalid argument $ And here is the receiver: $ sshd -d -d -d debug1: sshd version OpenSSH_2.3.0p1 debug1: Seeding random number generator debug1: read DSA private key done debug1: Seeding random number generator debug1: Bind to port 22 on 0.0.0....

...have two IP addresses but our downstream gateway is the same. So I have 100.200.300.400 with gateway 6.7.8.9 and 1.2.3.4 with gateway 6.7.8.9. (We are allocated two IPs from the same subnet.) So far I have: ... # setup our routes to our gateways ip route add $GW1 src $IP1 dev $IF1 ip route add $GW2 src $IP2 dev $IF2 # setup interface specific routing tables ip route add $NET1/$CIDR1 dev $IF1 table 200 ip route add default via $GW1 dev $IF1 table $TABLE1 ip route add $NET2/$CIDR2 dev $IF2 table 100 ip route add default via $GW2 dev $IF2 table $TABLE2 # create a default route with a multipath...

Hi, I would appreciate any help with getting Guild Wars 2 to run on Debian Linux (KDE, testing). When I hit the "Play" button on the start screen, the music starts to play but the GW2 window only shows the underlying console window. It just sits there and has to be killed manually. Specs: AMD Athlon 64 X2 4400+ 4 GB RAM GeForce GTX 260 Nvidia driver 295.53 Wine 1.5.5 Output from ~/.wine/drive_c/Program Files/Guild Wars 2$ wine Gw2.exe &> log.txt fixme:heap:HeapSetInf...

...pecting there is a firewall on his network or on his computer that's doing something funny. I'll see the same user shown as having a session on two different servers. I've also seen log messages like this that make me think he's hopping from server to server: Nov 14 23:44:37 rfs-gw2 smbd[30790]: [2007/11/14 23:44:37, 0] lib/util_sock.c:read_socket_data(384) Nov 14 23:44:37 rfs-gw2 smbd[30790]: read_socket_data: recv failure for 4. Error = Connection timed out Nov 14 23:44:37 rfs-gw2 smbd[30790]: [2007/11/14 23:44:37, 0] smbd/service.c:set_current_service(51) Nov 14 23:44:37...

How's wine support coming with translucent windows? Guild wars 2 has a new launcher that makes extensive use of transparency to mimic the in-game interface, but of course, it turns into a massive black square here. Screenshot of the launcher, all that is black is supposed to be transparent: http://i.imgur.com/BqNo7.jpg I know it's nitpicky but google implied some progress on this and I

you can also give -perf argument to get on screen fps and many other things. I'm running it like this: wine gw2.exe -fps 50 -perf Some other command line options: http://www.guildwars2guru.com/topic/32437-gw2-command-lines/page__p__1367714#entry1367714

...39;m having a very strange problem concerning traceroute and routing and didn''t know if lartc or netfilter would be the correct choice for asking. (so sorry if my question is misplaced) I have the following setup: public ip -- gw1 -- 172.16.0.1 --- 172.16.0.2/and public ip''s --- gw2 --- switch --users (public and private ip addresses; ip-user-pub) from the internet: Traceroute to a ip-user-pub shows: public ip gw1 --> 172.16.0.2 --> ip-user-pub I tried using SNAT on gw2 so that instead of 172.16.0.2 I would get one of the public ip addresses I have on gw2. It seems tha...

Thanks for the help, James! its finally working!

Very soon Guild Wars 2, the MMO we've all been waiting for (right? right!) is coming, and I would like to do my part to make sure that it runs under Wine from day one. Especially as GW1 is one of the top-performing games under Wine. Now I am not an avid coder, but I will pre-purchase the CE, and with it comes access to all the beta events between April 10 and release. So there should be

...ws down you server. > > winbind enum users = no > > winbind enum groups = no > > > > And then try this: > > wbinfo -a marcio > > > > > > I'll bet that works. > > > How much are you prepared to bet ;-) ALL IN.. ;-) root at rtd-gw2:~# wbinfo -a username Enter username's password: plaintext password authentication succeeded Enter username's password: challenge/response password authentication succeeded root at rtd-gw2:~# wbinfo -a BAZRTD\\username Enter BAZRTD\username's password: plaintext password authentication...

Hello all! I applied http://www.ssi.bg/~ja/routes-2.6.8-10.diff patch to kernel 2.6.8.1 and it works fine, or almost fine. It does the load balancing well, but when one link is dropped it continues to try it. At the end of http://www.ssi.bg/~ja/nano.txt it is said to ping gateway 1 and gateway 2, for the kernel to know if that route is working, but since my linux is connected to the links

...mer called me and said that their VPN isn't working anymore. I have a very simple setup, with two gateways (running tincd 1.0pre8-3 on Debian 3.0 stable), linking two subnets. So I noticed that tincd on second gateway isn't running anymore. Checking logs revealed: syslog.0:Apr 4 06:04:10 gw2 kernel: Out of Memory: Killed process 15903 (tincd). syslog.0:Apr 4 06:04:12 gw2 tinc.gw2[15903]: Terminating Obviously tincd ate all the memory, and kernel killed it. Memory leak? So, I recompiled it with a patch recommended in http://mail.nl.linux.org/tinc/2003-03/msg00020.html and it seems...

...; becouse the kernel seems to attach the src address reguardless of the *real* path that the packet takes. Under these circumstances the provider refuses to route the packets. Eg: /10.0.0.1 -> (gw1) 10.0.0.254 (adsl1: table adsl1 w/ default 0.254) FW \ 192.168.1.1 -> (gw2) 192.168.1.254 (adsl2: table adsl2 w/ default 1.254) suppose 10.0.0.254 is the default gateway for table ''main''. iptables -t mangle -A OUTPUT -d $TEST -p icmp -j MARK --set-mark $MARK ip rule add fwmark $MARK table adsl2 Now a ping to $TEST would result in icmp packets s...

Hello, I have a problem with the following setup, I hope you can help me. I have two internet gateways, one for LAN1 and the second for LAN2. +--------------+ GW1 more eth0| |eth4(SNAT) GW2 ---...routers...-----+ router +----------------- | | +---+------+---+ eth1| eth2| | | LAN1| LAN2| I am using the following setup: ip rule add fwmark 1 look...

Hello, I have an issue with multiple connections to the Internet. I tried following the steps described in [1] but things are not working properly. I would like the network setup as follows: ______ | |- ppp0 -- Dynamic IP (PPPoE on eth2) Internal---- eth0 | GW | |____|- eth1 -- Static IP -> Static''s GW From [1], the