search for: fxp1

...to do it's dance. > It's the same interface each time (and I've changed cards...) > Anyway, for the record, a little from messages: > > Jun 2 18:48:43 nol33n0x /kernel: fxp0: Microcode loaded, int_delay: 1000 usec > bundle_max: 6 > Jun 4 16:57:50 nol33n0x /kernel: fxp1: SCB timeout: 0x80 0xe0 0x50 0x0 > Jun 4 16:57:51 nol33n0x last message repeated 4 times > Jun 4 16:57:51 nol33n0x /kernel: fxp1: SCB timeout: 0x80 0xe0 0x50 0x400 > Jun 4 16:57:58 nol33n0x /kernel: fxp1: SCB timeout: 0x80 0xe0 0x50 0x0 > Jun 4 16:57:58 nol33n0x last message repeate...

...tt/1.4i Is there any way to bond sniffer interfaces? I've read a little on netgraph and it seems like i maybe able to use that but i'm not sure how to go about that. Basicly the end result is to have snort listen on a virtual interface, which will have data sent to it from say fxp0 and fxp1. I also want to make sure that data from fxp0, fxp1 or $VIRTUAL doesn't get sent out fxp1 or fxp0 for some reason. ----- End forwarded message ----- I'm sure i checked this before, but a google search turned up this. ngctl mkpeer fec dummy fec ngctl msg fec0: add_iface '"sf2&qu...

I will shortly be replacing a couple of proprietary VPN boxes with a FreeBSD solution. Section 10.10 of the Handbook has a detailed description of how to do this. However I remember a lot of discussion about a year ago about whether the gif interface was necessary to set up VPNs like this or whether it was just a convenience, for "getting the routing right". A number of people said

...nort list archives in search of information on setting up snort on a FreeBSD bridge(4) that logs to a remote postgres box via a third interface (hme0) Snort is being started with the following command: /usr/local/bin/snort -A full -D -e -d -s -i fxp0 -c /usr /local/etc/snort.conf Where fxp0 and fxp1 are in the bridge output from sysctl: net.link.ether.bridge_cfg: fxp0:0,fxp1:0 net.link.ether.bridge: 1 net.link.ether.bridge_ipfw: 0 net.link.ether.bridge_ipf: 1 net.link.ether.bridge_ipfw_drop: 0 net.link.ether.bridge_ipfw_collisions: 0 The snort.conf is attached. I've attempted to start w...

...ernet> port 0x1800-0x183f mem 0xf4001000-0xf4001fff,0xf4100000-0xf41fffff irq 17 at device 3.0 on pci0 miibus0: <MII bus> on fxp0 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:03:47:3a:97:a5 fxp1: <Intel 82559 Pro/100 Ethernet> port 0x1840-0x187f mem 0xf4002000-0xf4002fff,0xf4200000-0xf42fffff irq 18 at device 4.0 on pci0 miibus1: <MII bus> on fxp1 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: Etherne...

...xd0ff mem 0xfeafc000-0xfeafcfff irq 5 at device 5.0 on pci0 aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs ahc1: <Adaptec aic7899 Ultra160 SCSI adapter> port 0xd800-0xd8ff mem 0xfeaff000-0xfeafffff irq 10 at device 5.1 on pci0 aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs fxp1: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xd400-0xd43f mem 0xfe900000-0xfe9fffff,0xfeafd000-0xfeafdfff irq 9 at device 6.0 on pci0 fxp1: Ethernet address 00:30:48:10:6b:9d inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100bas...

...i che ne e freebsd-specific :P ne sym go pisal az a i ne sam mnogo mnogo zapoznat s pf zatova ako nqkoi moje da pomogne e dobre doshyl :) btw moje i neshto ot tia opcii kato set timeout i optimization da e :] Macros: define common values, so they can be referenced and changed easily. extif="fxp1" # replace with actual external interface name i.e., dc0 intif="fxp0" # replace with actual internal interface name i.e., dc1 internal_net="172.16.0.0/16" external_addr="192.168.173.34" loif="lo0" set timeout { interval 30, frag 10 } set timeout...

...fxp0: <Intel 82550 Pro/100 Ethernet> port 0x2040-0x207f mem 0xfeb40000-0xfeb5ffff,0xfeb7e000-0xfeb7efff irq 9 at d evice 9.0 on pci0 fxp0: Ethernet address 00:02:b3:62:68:d3 inphy0: <i82555 10/100 media interface> on miibus1 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel 82550 Pro/100 Ethernet> port 0x2080-0x20bf mem 0xfeb20000-0xfeb3ffff,0xfeb7d000-0xfeb7dfff irq 16 at device 10.0 on pci0 fxp1: Ethernet address 00:02:b3:62:6a:19 inphy1: <i82555 10/100 media interface> on miibus2 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto isab...

Hi all I've very big problem with my nfsd server. I'm running FreeBSD-stable and sometime (one time/week) i've this kind of message on the console : bge0 watchdog timeout problems fxp1 watchdog timeout problems and all my network card is down. Nothing can make the network card work again (only reboot working). There are only one service I need on this server and it'is nfsd (and rpc.* etc...) It's dual-pro ML350G4 proliant. What kind problem is it ? Software problem ?...

...er and on charon, and the reverse is also true. However, I cannot connect to any samba servies on Hades from any machine on the network (Neptune, Charon, and Tower). In my configuration, I have tried setting the 'interfaces' parameter to the default (blank) and to 'fxp*' (fxp0 and fxp1 are my NICs), and still have had no luck. After checking the log files (and setting the log level to 10) I can't see anything about any requests being made, let alone rejected. The ability to do bridging is important, as I often goto lan parties and need fast access to hades from neptune. Mos...

...ce.c:interpret_interface(134) can't determine netmask for 10.25.165.3 It seems to have problems with my network card, so here's my ifconfig output: fxp0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500 ether 00:b0:d0:aa:82:cf media: Ethernet autoselect (none) status: no carrier fxp1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 10.25.165.1 netmask 0xffffff00 broadcast 10.25.165.255 inet 10.25.165.2 netmask 0xffffffff broadcast 10.25.165.2 inet 10.25.165.3 netmask 0xffffffff broadcast 10.25.165.3 ether 00:02:b3:1b:49:71 media: Ethernet autoselect...

...7/8/9 EtherExpress Pro/100(B) Ethernet> port 0xc000-0xc01f mem 0xd8800000-0xd88fffff,0xd8c00000-0xd8c00fff irq 12 at device 0.0 on pci1 fxp0: Ethernet address 00:a0:c9:e7:a6:e6 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xc400-0xc43f mem 0xd8a00000-0xd8afffff,0xd8b00000-0xd8b00fff irq 10 at device 1.0 on pci1 fxp1: Ethernet address 00:02:b3:07:fd:8d inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100b...

...s not pf related, because, same behaviour occurs with IPF!!!!!!!! Details fw01: running FreeBSD 5.3, GENERIC kernel, with modules = acpi, ipl, bridge, nullfs and pf. Sr01: FreeBSD 5.2.1, custom kernel Sr02: FreeBSD 5.3, GENERIC kernel ------------------------------------pf.conf set loginterface fxp1 jail=**IP** sr01=**IP** sr02=**IP** #block in quick proto tcp from any to $sr01 port smtp pass quick from any to $jail keep state label 0 pass quick from $jail to any keep state label 1 pass quick from any to $sr02 keep state label 6 pass quick from $sr02 to any keep state label 7 pass quick fro...

Just got a net4501 board, installed cf card/Monowall. Does anyone have a monowall firewall with Asterisk behind it, any problems, can external SIP phones work? What firewall rules are you using? Chris Mason Int: (305) 704-7249 Fax: (815)301-9759

...0: <Intel Pro 10/100B/100+ Ethernet> port 0xb400-0xb43f mem 0xf0800000-0xf08fffff,0xf1000000-0xf1000fff irq 11 at device 13.0 on pci0 fxp0: Ethernet address 00:02:b3:4c:0b:66 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xb000-0xb03f mem 0xef800000-0xef81ffff,0xf0000000-0xf0000fff irq 10 at device 14.0 on pci0 fxp1: Ethernet address 00:02:b3:4c:32:12 inphy1: <i82555 10/100 media interface> on miibus1 inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto a...

> -----Original Message----- > From: Greg Panula [mailto:greg.panula@dolaninformation.com] > Sent: 12 May 2003 11:10 > To: Matthew Braithwaite > Cc: stable@freebsd.org > Subject: Re: iHEADS UP: ipsec packet filtering change > > You don't really need the gif tunnels for ipsec. Gif is more geared > towards ipv4 <=> ipv6 type tunnels. A few of ipsec

Hi, We got the following error messages when we ran rsync 2.5.2 from Solaris-5.5.1 to Solaris-5.8. vl121909/jagcdms_ch+_diags/sys/sys_l/ch_sys/rtl/systop.v vl121909/jagcdms_ch+_diags/sys/sys_l/ch_sys/rtl/sysup_esat.v vl121909/jagcdms_ch+_diags/sys/sys_l/ch_sys/rtl/upesat_defines.h wrote 63878001383 bytes read 1529124 bytes 1246928.64 bytes/sec total size is 148182624008 speedup is 2.32 rsync

I've spent the past four days or so updating machines here to 4.8/9-stable via cvsup, and have done a complete make buildworld/kernel on each machine (some SMP, some single processor). It seems something is broken with the latest fxp driver, on each machine (different mobos and hardware configs) heavy network traffic with fxp NICs causes timeouts and random kernel panics. First machine to

...nort list archives in search of information on setting up snort on a FreeBSD bridge(4) that logs to a remote postgres box via a third interface (hme0) Snort is being started with the following command: /usr/local/bin/snort -A full -D -e -d -s -i fxp0 -c /usr /local/etc/snort.conf Where fxp0 and fxp1 are in the bridge output from sysctl: net.link.ether.bridge_cfg: fxp0:0,fxp1:0 net.link.ether.bridge: 1 net.link.ether.bridge_ipfw: 0 net.link.ether.bridge_ipf: 1 net.link.ether.bridge_ipfw_drop: 0 net.link.ether.bridge_ipfw_collisions: 0 The snort.conf is attached. I've attempted to start w...

...24 16:43:24, 10] lib/ms_fnmatch.c:ms_fnmatch(240) ms_fnmatch(fxp*,fxp0) -> 0 [2004/10/24 16:43:24, 2] lib/interface.c:add_interface(79) added interface ip=192.168.100.1 bcast=192.168.100.255 nmask=255.255.255.0 [2004/10/24 16:43:24, 10] lib/ms_fnmatch.c:ms_fnmatch(240) ms_fnmatch(fxp*,fxp1) -> 0 [2004/10/24 16:43:24, 2] lib/interface.c:add_interface(79) added interface ip=192.168.200.1 bcast=192.168.200.255 nmask=255.255.255.0 [2004/10/24 16:43:24, 10] lib/ms_fnmatch.c:ms_fnmatch(240) ms_fnmatch(fxp*,fxp3) -> 0 [2004/10/24 16:43:24, 2] lib/interface.c:add_interface(79)...