search for: fwdnet

I've setup my IAX2 over FWD and it is working I can receive a test call and I can call out. Though I cannot figure out how to dial 1-800 numbers over FWD When I dial 1-800 it hangs up on me. Here is a typical session: Called xxxxx:xxxxxxx@iax2.fwdnet.net/18007425877 -- Call accepted by 65.39.205.121 (format ULAW) -- Format for call is ULAW -- Hungup 'IAX2[65.39.205.121:4569]/3' Dialing *1800... doesn't do anything. What am I doing wrong? -- #Joseph

...thing. In coming works fine from FreeWorld via IAX. But when Dialing out i get: May 13 13:42:01 WARNING[1150495040]: chan_iax2.c:5256 socket_read: I don't know how to authenticate iaxtel to 65.39.205.121 my IAX.conf if as follows [general] port=5036 register => ######:xxxxxxxxxxxxx@iax2.fwdnet.net disallow=all allow=ulaw [iaxfwd] type=user context=fromiaxfwd deny=0.0.0.0/0.0.0.0 permit=65.39.205.0/255.255.255.0 Gotta be something easy im missing.

...ed to Asterisk CVS-v1-0-02/01/05-09:34:45 currently running on chat (pid = 8282) chat*CLI> Verbosity is at least 3 -- Executing SetCallerID("SIP/1001-a1fb", ""David Kwok"") in new stack -- Executing Dial("SIP/1001-a1fb", "IAX2/XXXX:XXXX@iax2.fwdnet.net/268757|60|r") in new stack -- Called XXXXX:XXXXX@iax2.fwdnet.net/268757 -- Call accepted by 65.39.205.121 (format ulaw) -- Format for call is ulaw -- IAX2/FWD/4 is busy -- Hungup 'IAX2/FWD/4' == Everyone is busy/congested at this time -- Executing Congesti...

...gt; s/* ;exten => s,4,BackGround(welcome) ;exten => s,2,SetCIDName(Good Person) ;exten => s,3,Dial(SIP/goodperson) [IAXFWD] exten => _98.,1,SetCallerID(my FWD #) exten => _98.,2,SetCIDName,"FWD.Fahad" exten => _98.,3,Dial(IAX2/ my FWD #: my fwd password @iax2.fwdnet.net/${EXTEN:2},120,r) exten => _98.,4,Congestion exten => _98.,1,SetCallerID(my FWD #) exten => _98.,2,SetCIDName,"FWD.Fahad" exten => _98*.X.X,3,Dial(IAX2/ my FWD #: my fwd password @iax2.fwdnet.net/${EXTEN:2},120,r) exten => _98*.X.X,4,Congestion [IAXFWD-IN...

Im trying to get IAX to work between my * and FWD. I activated my iax2 account on iax.fwdnet.net and I get the output: "Registered to '65.39.205.121', who sees us as 68.14.203.254:4569" when I start asterisk. I tried used the Call Me tool on fwdnet.net but I dont get any calls even though the Call Me tool says everything looks ok. Can someone call my FWD number and jus...

...em is that I can not make a call to another FWD user. Here is what asterisk says: -- Executing [393xxxxxx@default:1] Set("Zap/1-1", "CALLERID(all)="xxxxxx"") in new stack -- Executing [393xxxxxx@default:2] Dial("Zap/1-1", " IAX2/yyyyyy:pppppppp@iax2.fwdnet.net/xxxxxx|60|r") in new stack -- Called yyyyyy:pppppppp@iax2.fwdnet.net/xxxxxx -- Call accepted by 192.246.69.186 (format ulaw) -- Format for call is ulaw -- IAX2/192.246.69.186:4569-1 is busy -- Hungup 'IAX2/192.246.69.186:4569-1' == Everyone is busy/congested a...

...numbers but not Vonage. I can be called from ipkall and fwd and can call aixtel numbers. I use aix2 with Fwd. My extensions.conf for Vonage: ; vonage numbers ; ; +2431 exten => _2431XXXXXXXXXX,1,SetCallerID,${FWDCIDNAME} exten => _2431XXXXXXXXXX,2,Dial,IAX2/${FWDNUMBER}:${FWDPASSWORD}@iax2.fwdnet.net/**${EXTEN},60,r) exten => _2431XXXXXXXXXX,3,Playback(invalid) exten => _2431XXXXXXXXXX,4,Hangup exten => _2431XXXXXXXXXX,103,Bus The output is: -- Executing SetCallerID("Phone/phone0", ""Chris"") in new stack -- Executing Dial("Phone/phone0&q...

...| 4 | 0 | 30 | 0 | +------+----------+------+--------------+------+--------+------+------+ trunks +------+------+---------------------------------+ | name | tech | path | +------+------+---------------------------------+ | FWD | IAX2 | 657XXX:XXXXXXXX@iax2.fwdnet.net | +------+------+---------------------------------+ routes +---------+-----------+--------+-------------+-----------------+------+ | pattern | comment | trunks | connectcost | includedseconds | cost | +---------+-----------+--------+-------------+-----------------+------+ | 4. | FWD...

...Anyone have any advice? Cheers! kswail =========================================================== Here are relevant parts of my configs ----------------------------------------------------------- iax.conf ----------------------------------------------------------- register=xxxxx:yyyyyyyy@iax2.fwdnet.net [fwd] username=xxxxx type=peer secret=yyyyyyyy qualify=yes host=iax2.fwdnet.net auth=md5 [fwd-in] type=user inkeys=freeworlddialup context=from-pstn auth=rsa =========================================================== Here is output from the asterisk console as it pertains to IAX2 ---------...

...xxx) mon numero FWD exten => yyyyyy,1,Dial(IAX2/iaxfwd-outbound/yyyyyy) celui d'un ami FWD iax.conf -------- [general] context=default bandwidth=low disallow=lpc10 jitterbuffer=no forcejitterbuffer=no tos=lowdelay autokill=yes allow=ulaw language=fr register => xxxxxx:mon_login_FWD@iax2.fwdnet.net [iaxfwd-outbound] type=peer username=xxxxxx host=fwd.pulver.com secret=mon_passwd_FWD disallow=all allow=ulaw allow=gsm allow=ilbc allow=g726 nat=yes when I call the 613 number (echo FWD service), I have this message from my PBX: Executing Dial("SIP/xlite-9f55", "IAX2/iaxfwd-...

Hi list, since few days my asterisk says I'm connected to iax2.fwdnet.net but I can't call (even 612 or 613), all my calls finishing with "nobody pickup in 30s" and calls I receive finish the same way (no answer from called party which means my *) I debug iax and saw that call is going through iax2.fwdnet.net My iax show channels also tell me chann...

...t: [disa] exten => 087,1,Answer exten => 087,2,DigitTimeout,8 exten => 087,3,ResponseTimeout,20 exten => 087,4,Authenticate(985) exten => 087,5,DISA(951|disa-access) [disa-access] include => tollfree include => outgoing-voipjet [tollfree] ; ; terminate toll-free no.'s via fwdnet ; US toll free access exten => _1800.,1,Macro(tollfree,${EXTEN}) exten => _1866.,1,Macro(tollfree,${EXTEN}) exten => _1877.,1,Macro(tollfree,${EXTEN}) exten => _1888.,1,Macro(tollfree,${EXTEN}) [macro-tollfree] exten => s,1,SetCallerID,${FWDCIDNAME} exten => s,2,Dial,IAX2/${FWD...

...SIP session Respondent: (sip:8612@192.168.2.2) Remote client: Started: May 26 16:33 Accepted: no Ended: May 26 16:34 End reason: Call rejected: 503 Service Unavailable =============== Asterisk Debug ================ Executing Dial("SIP/2201-a83e", "IAX2/<FWDNUMBER>:@iax2.fwdnet.net/612|60|r") in new stack -- Called <FWDNUMBER>:@iax2.fwdnet.net/612 Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000 Type: IAX Subclass: NEW Timestamp: 00014ms SCall: 00003 DCall: 00000 [65.39.205.121:4569] VERSION : 2 CALLED NUMBER : 612 CALLING NAME...

...m ; ; [1001] type=friend username=xxxxxx host=dynamic secret=xxxxxxx callerid=Home <1001> dtmfmode=RFC2833 mailbox=1001 context=sip and here is my extensions.conf: [general] static=yes writeprotect=no ; [globals] HOME=SIP/1001 ; [sip] exten => 1001,2,Dial(SIP/1001,20,t) include => fwdnet ; [fwdnet] exten => _8.,1,Dial,SIP/${EXTEN:1}@fwd,t Now as I said I can call out no probs by dialing 8 then the FWD number, but incoming calls don't work, and as far as I can see that should ring ext 1001 for 20 secs. Could someone please help a complete Linux/Asterisk Newb, as apart f...

...ious numbers, 612, 613, 55555 - all the same, no reply. So I guess I have a problem at my end. When I attempt a call I see:- -- Executing SetCallerID("SIP/5061-084eda58", "username") in new stack -- Executing Dial("SIP/5061-084eda58", "IAX2/596146:secret@iax2.fwdnet.net/612|60|r") in new stack -- Called 526146:secret@iax2.fwdnet.net/612 When the call is trying to connect:- splat*CLI> iax2 show channels Channel Peer Username ID (Lo/Rem) Seq (Tx/Rx) Lag Jitter JitBuf Format (None) 65.39.205.121...

When I try to call out to FWD over IAX2 I get: Call rejected by 65.39.205.121: Unable to negotiate codec I'm using asterisk-1.0.5 (the same settings works fine with *0.9) I've standard settings in iax.conf [general] bindport=4569 register => xxxxx:xxxxxx@iax2.fwdnet.net [iaxfwd] type=user context=fromiaxfwd auth=rsa inkeys=freeworlddialup disallow=all allow=ulaw -- #Joseph

Hi, I had a FWD account set up with asterisk (using SIP) and it was working fine both ways. I switched to IAX2 and now I can't get incoming calls from FWD. People who call my FWD number get a "480 - user is not online" message without any traffic reaching my box. I can call FWD numbers fine over IAX2. It seems fwd isn't trying to place the call over IAX2 because it thinks

...iax_error_output: Ignoring unknown information element 'Unknown IE' (40) of length 2 Jan 25 18:02:12 WARNING[114696]: chan_iax2.c:3044 authenticate_verify: requested inkey 'freeworlddialup' for RSA authenticationdoes not exist When I try to call out I get: Called 495771:xxxxx@iax2.fwdnet.net WARNING[114696]: chan_iax2.c:4534 socket_read: Call rejected by 65.39.205.121: No such context/extension -- #Joseph

...a 5th? Every new * in the pbx means to modify all other *. So what i thougth was to set a main one with some of slaves or users, in this way, i will only need to add new "slaves" in the master, and this is what i tried. Office iax.conf =============== register => 999999:mypass@iax2.fwdnet.net [iaxfwd] type=user context=fromiaxfwd auth=rsa inkeys=freeworlddialup [rsaauth] type=peer host=dynamic auth=rsa outkeys=myast username=rsaauth context=extensions [user01] type=peer user=user01 host=dynamic secret=somepass username=user01 context=localuse outkeys=myast inkeys=myast Office ex...

Hi, I cannot seem to accept incoming calls from FWD using IAX2. I followed the directions posted at www.fwd.pulver.com/advanced/iax I can make outgoing calls fine using IAX via FWD. When someone calls me from FWD I get the following message: Chan_iax2.c:5251 socket_read: Reject connect attempt from 65.39.205.121 Any ideas? Thanks, S.