asterisk users - Aug 2005 - Receiving Calls from FWD Network using IAX2

Hello,
 
I am trying to setup my Asterisk box to accept calls from the FWD network.
I've followed all the config advice / samples I've found on the web.
 
Making calls to devices on the FWD network from my Asterisk box works
flawlessly, but whenever I try to call my Asterisk box from a FWD client I
get a busy signal, and a "Call Disconnected" 486 error.

What's odd is that I don't see any debug info from the console (iax2
debug).
I've tried forwarding UDP port 4569 to my Asterisk box and no diff.

Anyone have any advice? Cheers!
 
kswail
 
==========================================================Here are relevant
parts of my configs
-----------------------------------------------------------
iax.conf
-----------------------------------------------------------
register=xxxxx:yyyyyyyy@iax2.fwdnet.net
 
[fwd]
username=xxxxx
type=peer
secret=yyyyyyyy
qualify=yes
host=iax2.fwdnet.net
auth=md5
 
[fwd-in]
type=user
inkeys=freeworlddialup
context=from-pstn
auth=rsa
==========================================================Here is output from
the asterisk console as it pertains to IAX2
-----------------------------------------------------------
asterisk*CLI> iax2 show registry
Host                  Username    Perceived             Refresh  State
65.39.205.121:4569    xxxxx       00.00.00.244:4569          60  Registered
-----------------------------------------------------------
asterisk*CLI> iax2 show peers
Name/Username    Host                 Mask             Port      Status    
fwd/xxxxx        65.39.205.121   (S)  255.255.255.255  4569      OK (15 ms)
-----------------------------------------------------------

in iax.conf devi anche mettere questa riga per ogni fwd:

register => FWDNumber:passwd@iax.fwdnet.net

Bruno.

kswail wrote:
>Hello,
> 
>I am trying to setup my Asterisk box to accept calls from the FWD network.
>I've followed all the config advice / samples I've found on the web.
> 
>Making calls to devices on the FWD network from my Asterisk box works
>flawlessly, but whenever I try to call my Asterisk box from a FWD client I
>get a busy signal, and a "Call Disconnected" 486 error.
>
>What's odd is that I don't see any debug info from the console (iax2
debug).
>I've tried forwarding UDP port 4569 to my Asterisk box and no diff.
>
>Anyone have any advice? Cheers!
> 
>kswail
> 
>==========================================================>Here are
relevant parts of my configs
>-----------------------------------------------------------
>iax.conf
>-----------------------------------------------------------
>register=xxxxx:yyyyyyyy@iax2.fwdnet.net
> 
>[fwd]
>username=xxxxx
>type=peer
>secret=yyyyyyyy
>qualify=yes
>host=iax2.fwdnet.net
>auth=md5
> 
>[fwd-in]
>type=user
>inkeys=freeworlddialup
>context=from-pstn
>auth=rsa
>==========================================================>Here is output
from the asterisk console as it pertains to IAX2
>-----------------------------------------------------------
>asterisk*CLI> iax2 show registry
>Host                  Username    Perceived             Refresh  State
>65.39.205.121:4569    xxxxx       00.00.00.244:4569          60  Registered
>-----------------------------------------------------------
>asterisk*CLI> iax2 show peers
>Name/Username    Host                 Mask             Port      Status    
>fwd/xxxxx        65.39.205.121   (S)  255.255.255.255  4569      OK (15 ms)
>-----------------------------------------------------------
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users@lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>  
>

-- 
____________________________________________________________________

 BRUNO DE LUCA
 Tel. +39 02 9350 4780 (102)
 
 FG&A Software
 20017 Rho - Via Puccini, 8

 E-Mail :
bdeluca@fgasoftware.com
 Internet:
http://www.fgasoftware.com