One problem I can see is that you're not using the keys that come with
asterisk.
Mine (which works!) looks like this
iax.conf
register => user:pass@iax.fwdnet.net
[iaxfwd]
type=peer
context=from-fwd
permit=65.39.205.0/24
auth=rsa
host=iax2.fwdnet.net
inkeys=freeworlddialup
disallow=all
allow=ulaw
qualify=yes
extensions.conf
; Calls to FWD
exten => _393.,1,Set(CALLERID=37720)
exten => _393.,2,Dial(IAX2/user:pass@iax2.fwdnet.net/${EXTEN:3}|20)
exten => _393.,3,Congestion
[from-fwd]
exten => 37720,1,SetCallerID(393${CALLERIDNUM})
exten => 37720,2,Dial(SIP/2208,20)
exten => 37720,3,Voicemail,u2208
exten => 37720,4,Hangup
exten => 37720,103,Voicemail,b2208
exten => 37720,104,Hangup
Try this and see how it goes.
Mark, G7LTT/KC2ENI
Randolph, NJ
http://www.g7ltt.com
Bayrouni wrote:> Hello all,
> Here is my problem,
>
> I try to place a call to FWD (free world dialup) trough my asterisk PBX.
>
> my config is as follow:
>
> extensions.conf
> ----------------
> [internal]
> exten => 613,1,Dial(IAX2/iaxfwd-outbound/613) (service echo de FWD)
> exten => xxxxxx,1,Dial(IAX2/iaxfwd-outbound/xxxxxx) mon numero FWD
> exten => yyyyyy,1,Dial(IAX2/iaxfwd-outbound/yyyyyy) celui d'un ami
FWD
>
> iax.conf
> --------
> [general]
> context=default
> bandwidth=low
> disallow=lpc10
> jitterbuffer=no
> forcejitterbuffer=no
> tos=lowdelay
> autokill=yes
> allow=ulaw
> language=fr
>
> register => xxxxxx:mon_login_FWD@iax2.fwdnet.net
>
> [iaxfwd-outbound]
> type=peer
> username=xxxxxx
> host=fwd.pulver.com
> secret=mon_passwd_FWD
> disallow=all
> allow=ulaw
> allow=gsm
> allow=ilbc
> allow=g726
> nat=yes
>
> when I call the 613 number (echo FWD service), I have this
> message from my PBX:
> Executing Dial("SIP/xlite-9f55",
"IAX2/iaxfwd-outbound/613") in new stack
> -- Called iaxfwd-outbound/613
> Feb 7 09:38:17 NOTICE[2744]: chan_iax2.c:2821 auto_congest:
> Auto-congesting call due to slow response
> -- IAX2/iaxfwd-outbound-1 is circuit-busy
> -- Hungup 'IAX2/iaxfwd-outbound-1'
> == Everyone is busy/congested at this time (1:0/1/0)
>
> Please, how can I resolve this problem?
>
> Thank you very much
>
>