search for: faxservers

Hi! from 2 days I'm trying to run hylafax server and iaxmodem with Asterisk 1.8.5. I have 2 computers in the lan, one is the Asterisk PBX and the other is the server with hylafax and iaxmodem installed. In Asterisk I set up an IAX trunk in this way: ___________________________ iax.conf [iaxmodem] type=friend context=outgoing-fax disallow=all allow=ulaw username=iaxmodem secret=password

Hello! * Version: 1.6.0.3-rc1 Scenario: * -> Proxy -> routed back to myself (The only thing changing is the Request URI) (And the Record-Route, Via that are added, of course). Outgoing Context is faxserver-out, incoming context is faxserver (at least should be). Outgoing context is straight forward: [faxserver-out] exten => _X.,1,NoOP(FAXOUT -- Connecting ${CALLERID(all)} ->

hello everybody i want to send fax via asterisk in pass through mode. everything is ok if enable fax detection in ooh323 and write fax extension in extensions.conf file. just one problem: delay. i have to wait 5 seconds in order to fax detection done. it is too long for me when i have voice call and no fax. my phone rings after five seconds. is there any way to omit or reduce this time? i test

hello and thank you so much for your reply just one question: how do you use it? AFAIK, when asterisk receive a call, it select extensions based on the received number and when it detects fax, jump to the fax extension. now when should i use these show commands to detect fax and how should i tell asterisk to execute fax extension? this is a big problem for me, so i really appreciate if you help

Hi folks; This may not even be Samba related, but I'm stumped, so I thought I'd toss this one out here. All the client machines are on 192.168.1.x, all netmasks are configured as /24, etc. I cannot browse the network. I CAN connect to a resource on the server just fine if I specify the full name, but an attempt to bring up the network browser shows the network name (DENNINGER) but

Hi all I have got a samba-3.0.13 (hot off the press) PDC running here that also works as a print server printig via cups-1.1.23. As a backend I use openldap-2.2.11 What I get in my log files is what you see below. It seems this only happens when the user prints a *.pdf file. The message shows up once in a while, definetly not for every print job that gets submitted. Printing of those *.pdf

Hi, my Asterisk on debian lenny died after 80 days. server kernel: [7572666.186852] asterisk[3673]: segfault at 10 ip 7f3b8e90b4aa sp 40bf5f00 error 4 in l ibpthread-2.7.so[7f3b8e903000+16000] Anything what can be done to find out the reason? best regards Thomas

Hey; Yes, I?ve also seen that 5 second delay with our fax server and it drove me crazy. How I solved it was by doing a ?core show channels <concise|verbose>? and detect if there was a fax transmission going on. Doing it this way shows up instantaneously without any delay. Like so: mte6*CLI> core show channels concise

...followed. The system consists of a linux client, mainly used as a "service gateway", but also there is a component installed which is called update-server. Its purpose is to regular check a specific file on the smbfs for changes. There are also the already mentioned dos clients which are faxservers with special faxcards that need to run under dos. They also access the samba server and does (but not only) write entries to the file the update-server checks. The server itself is Debian GNU/Linux Well so far, so good. For the first 3 month everything went really well except some problems resolvi...

List, how can I put fax server functionality on Asterisk? * as a reliable fax server for 500-1000 fax/day (mostly incoming)? Fax server should be like HylaFax, i.e. stable, low maintenance and functionality like receiving fax as email with PDF attachment, sending faxes per WHFC. Faxing with spandsp using bri_stuff (BeroNet/Junghanns quadBRI ISDN cards) shortens some faxes, or faxes loose lines,

Hi, we have a faxserver with Asterisk, IAXModem and Hylafax. Faxes come from a SIP trunk to Asterisk, then are forwarded throught 5 IAXModems managed with Hylafax. Hylafax users can also send faxes to these modems and Asterisk send them throught the SIP trunk. We also have a dedicated modem used only for sending faxes coming from an Hylafax dedicated user. Sometimes Hylafax reports that a modem

HI, I'm trying to config a span from port 2 of a DIgium T410p to a Brooktrout TR114-P8V-T1 card. I have a T1-PRI from the TELCO in port 1 (thru first port) working just fine with Asterisk 1.0.3 - been working fine for some time now. No problem with dialplan PSTN calls. Now I'd like to "route" specific DID numbers in thru the TELCO T1-PRI and out thru the second port (span) on

Having seen all the discussions about troubles with faxing I am thinking of another solution, keeping it all digital. I want to put two ISDN BRI cards in a faxserver (not running Linux). The two BRI ports will be connected to a QUAD BRI card in an Asterisk box. The asterisk box will have a single PRI span for communication to the PSTN. Basically the setup will be: Faxserver BRI ->

I don't suppose anybody has an updated CalledID patch for Asterisk 1.4.26: https://issues.asterisk.org/view.php?id=8824 I've been running 1.4.21.1 for a while and have the need to update one of our Asterisk Conference/Faxserver/switches and wanted to see if the patch available would apply. It failed in several places. This keeps me from updating my other installs. Doug -- Ben

Hello! Canu tell me what the problem is? /usr/local/samba/bin/smbclient /bin/smbclient -d 10 -M munich.sun.local added interface ip=192.168.10.53 bcast=192.168.10.255 nmask=255.255.255.0 Client started (version 2.2.2). resolve_lmhosts: Attempting lmhosts lookup for name munich.sun.local<0x20> startlmhosts: Can't open lmhosts file /usr/local/samba/lib/lmhosts. Error was No such file or

Hi folks; Not sure what's going on here.... Running 3.0.14a here, with a fairly default config. Base OS is FreeBSD 5.4-STABLE. FreeBSD 5.4-STABLE #11: Fri Apr 8 09:48:24 CDT 2005 karl@FS.denninger.net:/usr/obj/usr/src/sys/KSD-SMP Here's the output from "testparm" Load smb config files from /usr/local/etc/smb.conf Processing section "[homes]" Processing

I'am running Linux as server.My printer is conected to an win98 client. It works fine, at least when the client and the printer are online. When I print from my Linux machine and the win98 not connected, the printcommand just disapear. "lpq" gives "no entries". Where does the printcommand go then? My problem is that in case I print from the Linux server and the win98

i sent a product suggestion to HP. It was a request to use software that already exists in their JetDirect and Multifunction Fax machines to make them seamlessly interoperate with a fax gateway in a way transparent to the end user. Essentially, giving the sysadmin a choice in fax transport mechanism to route all faxes over analog telephone transport or over the network. Thank you for taking

Hi folks; I have an odd one. I recently upgraded from 3.3.x to 3.4.3 and suddenly lost both the old "smbpasswd" file AND the ability to connect to printers from Windows 7 clients. File server is fine, and everything else is working - I can connect to printers from XP machines, but not from Windows 7 any more. I get an "0x00000000d" error from Win7 when I try to connect....