search for: faxserver

...r patience. ********************************************** * config ttyIAX in /etc/iaxmodem/ttyIAX ********************************************** device /dev/ttyIAX owner uucp:uucp mode 660 port 4570 refresh 300 server 10.0.1.204 // this is asterisk 1.8.5 peername iaxmodem secret password cidname FAXServer cidnumber 0123456789 codec slinear ********************************************** * config.ttyIAX in /var/spool/hylafax/etc/config.ttyIAX ********************************************** CountryCode: 39 AreaCode: 06 FAXNumber: +39.06.456789 LongDistancePrefix: 0 InternationalPrefix: 00 DialStr...

Hello! * Version: 1.6.0.3-rc1 Scenario: * -> Proxy -> routed back to myself (The only thing changing is the Request URI) (And the Record-Route, Via that are added, of course). Outgoing Context is faxserver-out, incoming context is faxserver (at least should be). Outgoing context is straight forward: [faxserver-out] exten => _X.,1,NoOP(FAXOUT -- Connecting ${CALLERID(all)} -> ${EXTEN}) exten => _X.,n,SIPAddHeader(P-Preferred-Identity: <sip:${CALLERID(num)}@test.domain.tld>) exten =>...

hello everybody i want to send fax via asterisk in pass through mode. everything is ok if enable fax detection in ooh323 and write fax extension in extensions.conf file. just one problem: delay. i have to wait 5 seconds in order to fax detection done. it is too long for me when i have voice call and no fax. my phone rings after five seconds. is there any way to omit or reduce this time? i test

...lved it was by doing a ?core show channels > <concise|verbose>? and detect if there was a fax transmission going on. > Doing it this way shows up instantaneously without any delay. Like so: > > > > mte6*CLI> core show channels concise > > > SIP/SIPRoutes-00000054!faxserver-tx!fax!11!Up!SendFAX!/var/spool/asterisk/fax/documents/faxadmin/default.tif,dfz!!voipbusiness!!3!4!(None)!1432132315.97 > > > > mte6*CLI> core show channels verbose > > Channel Context Extension Prio State > Application Data...

...talk about DIVING! http://genesis3.blogspot.com Musings Of A Sentient Mind Running 3.0.20b; here's the output of "Testparm" Load smb config files from /usr/local/etc/smb.conf Processing section "[homes]" Processing section "[printers]" Processing section "[faxserver]" Processing section "[pics]" Processing section "[Music]" Loaded services file OK. Server role: ROLE_DOMAIN_PDC Press enter to see a dump of your service definitions [global] workgroup = DENNINGER server string = Home Office FileServer interfaces = 192.168.1.0/24 max l...

Hi all I have got a samba-3.0.13 (hot off the press) PDC running here that also works as a print server printig via cups-1.1.23. As a backend I use openldap-2.2.11 What I get in my log files is what you see below. It seems this only happens when the user prints a *.pdf file. The message shows up once in a while, definetly not for every print job that gets submitted. Printing of those *.pdf

Hi, my Asterisk on debian lenny died after 80 days. server kernel: [7572666.186852] asterisk[3673]: segfault at 10 ip 7f3b8e90b4aa sp 40bf5f00 error 4 in l ibpthread-2.7.so[7f3b8e903000+16000] Anything what can be done to find out the reason? best regards Thomas

...server and it drove me crazy. How I solved it was by doing a ?core show channels <concise|verbose>? and detect if there was a fax transmission going on. Doing it this way shows up instantaneously without any delay. Like so: mte6*CLI> core show channels concise SIP/SIPRoutes-00000054!faxserver-tx!fax!11!Up!SendFAX!/var/spool/asterisk/fax/documents/faxadmin/default.tif,dfz!!voipbusiness!!3!4!(None)!1432132315.97 mte6*CLI> core show channels verbose Channel Context Extension Prio State Application Data CallerID Durati...

...followed. The system consists of a linux client, mainly used as a "service gateway", but also there is a component installed which is called update-server. Its purpose is to regular check a specific file on the smbfs for changes. There are also the already mentioned dos clients which are faxservers with special faxcards that need to run under dos. They also access the samba server and does (but not only) write entries to the file the update-server checks. The server itself is Debian GNU/Linux Well so far, so good. For the first 3 month everything went really well except some problems resolv...

...open for days (seems to be a sync problem). Any experiences/hints/suggestions? Or how would I best use Asterisk and Hylafax? Would IAXmodem work reliable? Anyone here using this with BRI? Or what about using Asterisk+HylaFax+CAPI (e.g. AVM C4)? Is there another way of using Asterisk as a reliable faxserver with BRI? Frank -- LocaNet oHG - http://www.loca.net Lindemannstrasse 81, D-44137 Dortmund tel +49 231 91596-23, mobil +49 172 2120354 SIP:23@voip.loca.net

Hi, we have a faxserver with Asterisk, IAXModem and Hylafax. Faxes come from a SIP trunk to Asterisk, then are forwarded throught 5 IAXModems managed with Hylafax. Hylafax users can also send faxes to these modems and Asterisk send them throught the SIP trunk. We also have a dedicated modem used only for sending faxes com...

...f type 'Zap' = Everyone is busy/congested at this time Accepting call from '1231231234' to '3213214321' on Channel 0/11, Span 1 Channel 0/11, Span 1 got hung up Hangup 'Zap/11-1' zaptel.conf span=2,0,0,esf,b8zs e&m=25-48 zapata.conf signaling = em_w context = faxserver group = 3 channel = 25-28 exten.conf exten => 1231231234,1,Dial(Zap/2-2/${exten}) -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041222/ce14235f/attachment.htm

Having seen all the discussions about troubles with faxing I am thinking of another solution, keeping it all digital. I want to put two ISDN BRI cards in a faxserver (not running Linux). The two BRI ports will be connected to a QUAD BRI card in an Asterisk box. The asterisk box will have a single PRI span for communication to the PSTN. Basically the setup will be: Faxserver BRI -> QuadBRI in * box -> PSTN through PRI in Asterisk box By keeping it di...

I don't suppose anybody has an updated CalledID patch for Asterisk 1.4.26: https://issues.asterisk.org/view.php?id=8824 I've been running 1.4.21.1 for a while and have the need to update one of our Asterisk Conference/Faxserver/switches and wanted to see if the patch available would apply. It failed in several places. This keeps me from updating my other installs. Doug -- Ben Franklin quote: "Those who would give up Essential Liberty to purchase a little Temporary Safety, deserve neither Liberty nor Safety....

...option SO_SNDTIMEO = 0 socket option SO_RCVTIMEO = 0 write_socket(3,76) write_socket(3,76) wrote 76 Sent session request got smb length of 1 size=1 smb_com=0x0 smb_rcls=0 smb_reh=0 smb_err=0 smb_flg=0 smb_flg2=0 smb_tid=0 smb_pid=0 smb_uid=0 smb_mid=0 smt_wct=0 smb_bcc=0 session request failed root@faxserver:/# ping munich.sun.local PING munich.sun.local (192.168.10.220): 56 octets data 64 octets from 192.168.10.220: icmp_seq=0 ttl=128 time=0.4 ms --- munich.sun.local ping statistics --- 1 packets transmitted, 1 packets received, 0% packet loss round-trip min/avg/max = 0.4/0.4/0.4 ms Thank you! Spie...

...#11: Fri Apr 8 09:48:24 CDT 2005 karl@FS.denninger.net:/usr/obj/usr/src/sys/KSD-SMP Here's the output from "testparm" Load smb config files from /usr/local/etc/smb.conf Processing section "[homes]" Processing section "[printers]" Processing section "[faxserver]" Processing section "[pics]" Loaded services file OK. Server role: ROLE_DOMAIN_PDC Press enter to see a dump of your service definitions # Global parameters [global] workgroup = DENNINGER server string = Home Office FileServer interfaces = 192.168.1.0/24 max log size = 50 deadt...

...he printcommand go then? My problem is that in case I print from the Linux server and the win98 client is not connected, or the printer is offline the print command is not queued for later printing when the win98 client and/or the printer is online again. The reason is that my Linux server act as faxserver, and incoming faxes are automaticly printed. Is this possible with Linux ans SMB, or do I have to configure a remote printer? Any suggestion(s) are welcome. In case somebody can help me, and need some more info about printcap etc. please let me know. Thanks Wil

...analog telephone line, just the network. 2.) If the sysadmin chooses the new network option, he would would then choose either email/t.37 or IPName/t.38. For the moment, lets just do an internal email setup. He would then enter the email address of the email to fax gateway on the LAN, FaxGateway@FaxServer.local. 3.) The end user places the paper document he wants to fax into the all-in-one. Enters the fax telephone # he wants to send to, for example 402-555-1234. Presses the "Fax" button and walks away. Notice the user does NOT enter an IP address or email address, just a fax #. No ke...

Hi folks; I have an odd one. I recently upgraded from 3.3.x to 3.4.3 and suddenly lost both the old "smbpasswd" file AND the ability to connect to printers from Windows 7 clients. File server is fine, and everything else is working - I can connect to printers from XP machines, but not from Windows 7 any more. I get an "0x00000000d" error from Win7 when I try to connect....