search for: f000

...disk Windows 95 boot disk Windows 98 boot disk The output I get for the different DOS images is as follows: * FreeDOS: (what I have on the screen!): e820: 000000001ff80000 0000000000080000 2 e820: 00000000ff800000 0000000000400000 2 e820: 00000000ffc00000 0000000000400000 2 Ramdisk at 0x1fdf0000, length 0x00168000 command line: initrd=freedos.img BOOT_IMAGE=memdisk.zi Disk is floppy, 1440 K, C/H/S = 80/2/18 Total size needed = 1494 bytes, allocating 2K Old dos memory at 0x9f000 (map says 0x9f000), loading at 0x9e800 1588: 0xffff 15E801: 0x3c00 0x1edf INT 13 08: Success, count = 1,...

...ration Device 5912 (rev 04) (prog-if 00 [VGA controller]) Subsystem: Dell Device 07a2 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at f6000000 (64-bit, non-prefetchable) [size=16M] Memory at e0000000 (64-bit, prefetchable) [size=256M] I/O ports at f000 [size=64] Expansion ROM at <unassigned> [disabled] Capabilities: [40] Vendor Specific Information: Len=0c <?> Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [ac] MSI: Enable- Count=1/1 Maskable- 64bit- Capabiliti...

...ed the syslinux on my g4l v0.31 alpha 05 for testing, and it comes up to the syslinux (isolinux) from the boot cd fine. Then when I select the kernel, the screen scrolls with the following lines for many iterations, and then it seems to load the kernel and run OK. 9B3F 9469 A30B 2300 8A79 75A0 F000 followed by 9 "0000" .ERROR: idle with IF=0 I only checked it with the 2.6.29.3 and 2.6.29.4 kernels, but they worked on the previous version with systlinux 3.80. +----------------------------------------------------------+ Michael D. Setzer II - Computer Science Instructor...

...t to boot. My conf file looks like: default sir4 label sir4 kernel ia32/memdisk append initrd=ia32/sir4/floppy.img Everything starts off fine. pxelinux loads I see it get the conf file. gets memdisk get floppy.img loads memdisk ...... Disk is floppy ..... INT 13 08: Sucess, count=1 BPT=f000:b6cc old: .... new: ... Booting... Nothing happens after that. This is a straight dos6.2 floppy just for a test. This is on a dual PIII 800 IBM 6866 box. It just tried it on a P4 2.0Ghz IBM 6229 box and it works great. I would like to do this on many models of machines from PII's to P4'...

...ms to be running OK - it auto loads X windows - so the nachine seems to be running fine. Here is the output that I do not understand ;-( : int=00000000 err=00000000 efl=00030287 eip=0000ffff eax=0000ffff ebx=000055aa ecx=00004f12 edx=00000000 esi=0000003d edi=00000000 ebp=00000000 esp=0000fffc cs=f000 ds=00fc es=3147 fs=0000 gs=0000 ss=9e7c cs=:eip:00 00 00 00 00 00 00 00 -00 00 00 00 00 00 00 00 ss:esp:= 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 BTX Halted Any hints? David

Hello I have 2 class-B networks (172.22.0.0/16 and 172.23.0.0/16, over 130k of ip''s) and need to setup traffic tbf shapers with 64kb/s for each ip from 172.22.0.0/16 and 128kb/s for each ip from 172.23.0.0/16 just read lartc and don''t understand how to use u32 for decreasing number of rules and hashing

...Copyright (C) 1997-2000 Intel Corporation For Realtek RTL8139(X)/8130/810X PCI Fast Ethernet Controller v2.17 (051202) [normal booting messages...] Loading pxegiga_av.img Ready. MEMDISK 3.31 2006-09-25 Copyright 2001-2005 H. Peter Anvin e820: 0000000000000000 000000000009f800 1 e820: 00000000000f0000 0000000000010000 2 e820: 00000000fec00000 0000000001400000 2 e820: 00000000e0000000 0000000010000000 2 e820: 000000001bef3000 000000000000d000 3 e820: 000000001bef0000 0000000000003000 4 e820: 000000000009f800 0000000000000800 2 e820: 0000000000100000 000000001bdf0000 1 Ramdisk at 0x1bd68000, leng...

Thank you. I notice the system then jumps to F000:FFF0 to execute. But because VMX is turned on, switching to real-mode would incur problems? I don’t find any clue to turn on the vm86 mode as Readme in the tools/firmware directory puts. Best regards, Hu Jia Yi Ext: 20430 Tel: 65-67510430 -----Original Message----- From: Cui, Dexuan...

...ed 0 -> 10 (XEN) HVM20: PCI-ISA link 2 routed to IRQ10 (XEN) irq.c:210: Dom20 PCI link 3 changed 0 -> 11 (XEN) HVM20: PCI-ISA link 3 routed to IRQ11 (XEN) HVM20: pci dev 01:1 bar 20 size 00000010: 0000c001 (XEN) HVM20: pci dev 01:2 INTA->IRQ7 (XEN) HVM20: pci dev 02:0 bar 10 size 02000000: f0000008 (XEN) HVM20: pci dev 02:0 bar 14 size 00001000: f2000000 (XEN) HVM20: pci dev 03:0 bar 10 size 00000100: 0000c101 (XEN) HVM20: pci dev 03:0 bar 14 size 01000000: f3000008 (XEN) HVM20: pci dev 03:0 INTA->IRQ11 (XEN) HVM20: Creating MP tables ... (XEN) HVM20: Loading Cirrus VGABIOS ... (XEN) H...

...he latest version of syslinux/pxelinux.. When cold pxe booting a HP DL585 G2 (Broadcom NIC), if the pxemenu item is LOCALBOOT 0 and is selected, then a red screen with the following error occurs: Illegal OpCode EAX=000E09AC EBX=00000000 ECX=00000000 EDX=00000000 EBP=00004408 ESI=0000F000 EDI=000045E9 DS=F000 ES=0000 FS=0000 GS=0003 CS:EIP=1000:00000240 SS:ESP=0030:0000FBE6 EFLAGS=00000047 This is all pre-operating system. Oddly enough, if I bypass the pxeboot process, the machine boots fine locally, and on subsequent reboots, pxelinux properly localboo...

Well, there are some issues about adding code to syslinux. Mainly there are no space to add code. I propose to move data to 0000:F000 (now in 0000:5000) and font data to 0000:5000 (now at 0000:E000). So we have additional 4K to code. I don't understand however why we have to retain font data... Does EGA card read from system memory all the time?? I don't think so... Perhaps it's better to read font data at another loc...

...put like MEMDISK 2.08 command line : BOOT_IMAGE=memdisk initrd=sussboot.img Disk is floppy, 1440 K, C/H/S = 80/2/18 Total size needed 1359 bytes, allocating 2K Old dos memory at 0xa0c00 (map says 0xa0c00), loading at 0xa0400 1588: 0x0000 15e801: 0x0000 0x0000 INT 13 08 : Success, count = 1, BPT =f000:8487 old: int13 = f000ec59 int15 = f000f859 new: int13 = a0400008 int15 = a0400272 Loading boot sector... And hangs at this point. Any ideas what I may be doing wrong? Thanks Rob Keeling -- I love deadlines. I love the whooshing noise they make as they go by. - Douglas Adams

I'm currently running v2.1rc1, but have been seeing errors like: Dec 8 11:31:55 it kernel: auth[18914]: segfault at 48 ip 00fe2f74 sp bfcaccd0 error 4 in libauthdb_imap.so[fdd000+f000] The unstable and nightly builds are newer, but are they likely to be more or less stable than the version I'm currently running? I'd like to install a newer version, but am trying to get a feel for how usable they're likely to be. Thanks, Terry

...f trying to get Simple Menu's working. My problem occurs after selecting a menu option. The image loads and gives me this output: command line: initrd=images/c201.img BOOT_IMAGE=memdisk Disk is floppy, 1440 K, C/H/S = 80/2/18 Total size needed = 1491 bytes, allocating 2K Old dos memory at 0x9f000 (map says 0x9f400), loading at 0x9e800 1588: 0xffff 15E801: 0x3c00 0x3e66 INT 13 08: Success, count = 1, BPT = f000:98a9 old: init13 = f0008590 init15 = f000f859 new: init13 = 9e800008 init15 = 9e80027c Loading boot sector... booting... Starting Windows 98... Windows is bypassing your startup fil...

...rev 04) (prog-if 00 [VGA controller]) > Subsystem: Dell Device 07a2 > Flags: bus master, fast devsel, latency 0, IRQ 11 > Memory at f6000000 (64-bit, non-prefetchable) [size=16M] > Memory at e0000000 (64-bit, prefetchable) [size=256M] > I/O ports at f000 [size=64] > Expansion ROM at <unassigned> [disabled] > Capabilities: [40] Vendor Specific Information: Len=0c <?> > Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 > Capabilities: [ac] MSI: Enable- Count=1/1 Maskable- 64bit- &g...

DELL PE 830 (Intel Pentium D with VT enabled). xen-unstable latest Trying to boot from CDROM and getting following error: (XEN) (GUEST: 1) Start BIOS ... (XEN) (GUEST: 1) Starting emulated 16-bit real-mode: ip=F000:FFF0 (XEN) (GUEST: 1) rombios.c,v 1.138 2005/05/07 15:55:26 vruppert Exp $ (XEN) (GUEST: 1) Remapping master: ICW2 0x8 -> 0x20 (XEN) (GUEST: 1) Remapping slave: ICW2 0x70 -> 0x28 (XEN) (GUEST: 1) VGABios $Id: vgabios.c,v 1.61 2005/05/24 16:50:50 vruppert Exp $ (XEN) (GUEST: 1) HVMAssist BIOS...

>>Could you do screen captures of the output of meminfo.c32 when booting ISOLINUX-4.06 as a CD and SYSLINUX-4.06 as a USB? The results both match for booting 4.06 via CD and USB: SYSLINUX 4.06 EDD 2012-10-23 boot: meminfo.c32 INT 15h = f000:f859 DOS RAM: 639K (0x9fc00) INT 12h: 639K (0x9fc00) INT 15 88: 0xfc00 (64512K) INT 15 E801: 0x3c00 (15360K) 0xbee8 (3127808K) 0 0000000000000000 00000000000a0000 00000000000a0000 1 [-] usable 1 00000000000f0000 0000000000010000 0000000000100000 2 [-] reserved 2 000000000010...

...en captures of the output of meminfo.c32 when booting > > ISOLINUX-4.06 as a CD and SYSLINUX-4.06 as a USB? > > > > The results both match for booting 4.06 via CD and USB: > > Thanks. > > > SYSLINUX 4.06 EDD 2012-10-23 > > boot: meminfo.c32 > > INT 15h = f000:f859 DOS RAM: 639K (0x9fc00) INT 12h: 639K (0x9fc00) > > INT 15 88: 0xfc00 (64512K) INT 15 E801: 0x3c00 (15360K) 0xbee8 > (3127808K) > > 0 0000000000000000 00000000000a0000 00000000000a0000 1 [-] usable > > 1 00000000000f0000 0000000000010000 0000000000100000 2...

...g-level 7 --log-prefix "c000" ip6tables -I INPUT -m iprange --src-range d000::0-ffff::0 -j LOG --log-level 7 --log-prefix "d000" ip6tables -I INPUT -m iprange --src-range e000::0-ffff::0 -j LOG --log-level 7 --log-prefix "e000" ip6tables -I INPUT -m iprange --src-range f000::0-ffff::0 -j LOG --log-level 7 --log-prefix "f000" In log file /var/log/firewall in OpenSUSE11.1. The log for one connection request is 117 Aug 28 20:01:46 alpine5 kernel: f000IN=eth0 OUT= MAC=00:21:5e:4e:9c:60:00:25:90:10:86:8d:86:dd SRC=fe80:0000:0000:0000:e91b:befe:97dc:9df5 DST=fe80...

...N) (GUEST: 11) Memory size 512 MB | (XEN) (GUEST: 11) E820 map: | (XEN) (GUEST: 11) 0000000000000000 - 000000000009F800 (RAM) | (XEN) (GUEST: 11) 000000000009F800 - 00000000000A0000 (Reserved) | (XEN) (GUEST: 11) 00000000000A0000 - 00000000000C0000 (Type 16) | (XEN) (GUEST: 11) 00000000000F0000 - 0000000000100000 (Reserved) | (XEN) (GUEST: 11) 0000000000100000 - 000000001FFFE000 (RAM) | (XEN) (GUEST: 11) 000000001FFFE000 - 000000001FFFF000 (Type 18) | (XEN) (GUEST: 11) 000000001FFFF000 - 0000000020000000 (Type 17) | (XEN) (GUEST: 11) 0000000020000000 - 0000000020003000 (ACPI NVS)...