search for: era

I'm not able to create the proper syntax to specify a lattice bwplot() for only one of two conditioning factors. The syntax that produces a box plot of each of the two conditioning factors is: bwplot(quant ~ param | era, data=mg.d, main='Dissolved Magnesium', ylab='Concentration (mg/L)') What I've tried unsuccessfully are: bwplot(quant ~ param | factor(era=='Pre-mining'), data=mg.d, main='Magnesium', ylab='Concentration (mg/L)) bwplot(quant ~ param | era, data=mg.d, ma...

Syndome Era Series *upsc output* * *battery.charge: 100 battery.runtime: 1000 <-- not reported by UPS (guesstimate) battery.voltage: 13.60 battery.voltage.high: 13.00 battery.voltage.low: 10.40 battery.voltage.nominal: 12.0 device.type: ups driver.flag.novendor: enabled driver.name: blazer_usb driver.par...

...Is there a way read it ? From: cubbie at garnet.berkeley.edu () Subject: Re: Cubs behind Marlins? How? Article-I.D.: agate.1pt592$f9a Organization: University of California, Berkeley Lines: 12 NNTP-Posting-Host: garnet.berkeley.edu gajarsky at pilot.njin.net writes: morgan and guzman will have era's 1 run higher than last year, and the cubs will be idiots and not pitch harkey as much as hibbard. castillo won't be good (i think he's a stud pitcher) This season so far, Morgan and Guzman helped to lead the Cubs at top in ERA, even better than THE rotation at Atlanta...

...(as seen in a spreadsheet). The two structures are: str(chem) 'data.frame': 65349 obs. of 8 variables: $ site : Factor w/ 64 levels "D-1","D-2","D-3",..: 1 1 1 1 1 1 1 ... $ sampdate: Date, format: "2007-12-12" "2007-12-12" ... $ era : Factor w/ 2 levels "Post","Pre": 1 1 1 1 1 1 1 1 1 1 ... $ param : Factor w/ 64 levels "AgDis","AgTot",..: 2 4 5 7 11 15 25 ... $ quant : num 1.30e-04 1.06e-01 2.31e+02 1.13e-02 5.00e-03 ... $ ceneq1 : logi TRUE FALSE FALSE FALSE TRUE FALSE...

Hi to everyone! I'm posting here after digging around the nut-upsuser and nut-upsdev mailing list, hoping I didn't miss something important. I'm trying to make my ups working with nut: it's a Tecnoware ERA LCD 0.85 which uses the so-hated UPSilon 2000 software to connect via usb. Personally I checked and seems that this junk software only works from windows, I'm trying to contact with tecnoware to get some info. I read a lot in the mailing-list about the "langid_fix" patch that seems w...

My apologies to the list, as the last patch was not correct. It did no harm, but was to the trailing comma on the structure above the enum I was targeting. This patch is correct. Signed-off-by: Bruce Rogers brogers@novell.com - Bruce _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

Reading the most recent news, we can see that the time has come to break the WinIntel monopoly on the world. Many devices are emerging, many architectures are being developed. The opensource community is getting great visibility. We should start thinking in bringing wine to this new scenario that is approaching. Many surprises are coming for the years to come. Why not we bring wine to devices such

Hello, Excuse the blatent self-promotion and certain degree of off-topicness, but I thought people here might find this of interest. We just recorded a radio show using Fideliphone (www.fideliphone.com) which uses CELT. Not sure exactly which version but the most recent release of Fideliphone was in May so it's probably not the most recent version. Anyway it performed beautifully! I

So I did a lot more debugging on this. I wrote a program that draws a triangle to an fbo, and then blits that to fb 0. If I draw the triangle with glBegin(GL_TRIANGLES); glColor3f(1, 0, 0); glVertex3f(-0.6*128 + 128, -0.75*128 + 128, 0.5); glColor3f(0, 1, 0); glVertex3f(0.6*128 + 128, -0.75*128 + 128, 0); glColor3f(0, 0, 1); glVertex3f(128, 0.75*128 + 128, 0); glEnd(); Then all

Hi Everyone, I have a dell 1750 server with ERA/O card running on FreeBSD 7.0-STABLE According to Dell, the ERA card supports ipmi 1.0: http://linux.dell.com/ipmi.shtml But so far no luck with freebsd :/ [root@home /usr/src/sys/i386/conf]# ipmitool -I open channel info 1 Could not open device at /dev/ipmi0 or /dev/ipmi/0 or /dev/i...

...easonably simple graph but I think I'm now going in circles with the colour. Attached is a picture of where I'm up to. The line creating this is: qplot(ageincgraph$age, ageincgraph$rate, position="dodge", stat="identity", geom="bar" ) + aes( colour=ageincgraph$era) + scale_colour_manual(values=c("red","orange","yellow")) Data is: > ageincgraph era rate age 1 1995-1999 21.97 <6 2 1995-1999 11.21 6-12 3 1995-1999 16.64 >12 4 2000-2004 10.56 <6 5 2000-2004 10.71 6-12 6 2000-2004 17.49 >12 7 2005-200...

...t ? > > From: cubbie at garnet.berkeley.edu () Subject: Re: Cubs behind Marlins? > How? Article-I.D.: agate.1pt592$f9a Organization: University of California, > Berkeley Lines: 12 NNTP-Posting-Host: garnet.berkeley.edu > gajarsky at pilot.njin.net writes: morgan and guzman will have era's 1 run > higher than last year, and the cubs will be idiots and not pitch harkey as > much as hibbard. castillo won't be good (i think he's a stud pitcher) > This season so far, Morgan and Guzman helped to lead the Cubs at > top in ERA, even better than THE rota...

...for name=somedomain.com type=MX: Host not found, try again) My resolv.conf is proper. I can ping any server, but postfix cannot see them. What can I do ? Postfix 2.1.5 Best Regards Kuba ---------------------------------------------------------------------- OMNIXMAIL! Jesli masz telefon w sieci Era i dostep do WAP, to mozesz na komorce odbierac poczte ze wszystkich swoich kont poczty e-mail! OMNIXMAIL jest w Era Omnix: http://link.interia.pl/f1896

As I, like many people, are coming to ruby in the rails era, I''m curious about how Ruby Web Dev was done prior to rails. Any veterans want to share their insights? -------------- next part -------------- An HTML attachment was scrubbed... URL: http://wrath.rubyonrails.org/pipermail/rails/attachments/20060518/20cde24d/attachment.html

I have set up dovecot to use ldap authentication, but it only results in dovecot crashing without any error message that would indicate why this is the case. I have spent *many* hours trying to fix this problem, but not found any solution as to why it should crash. maillog: Aug 15 10:05:08 era dovecot: Dovecot starting up Aug 15 10:05:09 era dovecot: Auth process died too early - shutting down Aug 15 10:05:09 era dovecot: child 20833 (auth) killed with signal 11 Aug 15 10:05:09 era imap-login: fd_send(-1) failed: Broken pipe Settings to indicate ldap in dovecot.conf: auth_userdb = ldap...

...have no access to the UPS from windows to complete the sniffing, but I can still try nut (and any patch) in linux through remote shell. If anyone who knows more about Megatec driver or has any hints, he's more than welcome. Thanks in advance, Rob ------------------------------- Settings: [ERA_LCD] driver = blazer_usb subdriver = krauler langid_fix=0x409 port = /dev/bus/usb/002/002 vendorid = 0001 productid = 0000 desc = "Tecnoware UPS ERA 0.8" port was setted according to lsusb output: $ lsusb [...] Bus 002 Device 002: ID 0001:0000 Fry's...

Im tryingn to run a cd from the windows 3.1 to '95 era. Its a Ford factory service manual disk for pulling up automotive diagnostics/schematics etc. The disk installed without a problem using wine /path/to/cdrom/install.exe . I can also run the locally installed executable file without a problem once again using wine /path/to/local.exe . The problem...

Hi all, I am trying to re-compile some "unmaintained" (it seems) packages, namely rSoNIA and dynamicnetwork from: http://csde.washington.edu/~skyebend/rsonia/rsoniaDemo/ These packages predates R 2.10.0 so they need to be recompile. After split the single big file in /man in each packages into a file for each function + some minor fix, I successfully manage to recompile and load

...day, June 13, 2013 4:26 PM > To: Marcuzzi, Javier Rubén > Cc: Jose Luis Cañadas ; r-help-es > > Subject: Re: [R-es] ¿Alguna explicación para este fenómeno? (Relativo al > uso de memoria) > > Hola, ¿qué tal? > > Al final he descubierto el motivo del problema. Cierto que esperaba > cierto nivel de _overhead_, pero nunca tantísimo. Por mucho _overhead_ > que haya, no se pasa de 7MB a 5GB. > > El problema era que (a pesar de mi opción stringsAsFactors = F) los > niveles de los factores se copiaban íntegros en cada una de las > columnas de tipo factor de ca...

Hello, I'm trying to debug why fbo-copyteximage-simple is failing, and I'm... failing. It's an extremely simple test. I'm pretty sure that the copyteximage part of it has nothing to do with the failure, at least it behaves identically when I just return tex instead of copiex_tex. Without any modifications, the test just renders one big red square. I think there's something