search for: emergency

I have a dataset. Initially, it has 25 levels for a certain factor, Description. However, I then subset it, because I am only interested in 2 of the 25 factors. When I subset it, I get the following. The vector lists only the two factors, yet there remain 25 levels: > Quadrats.df$Description [1] Emergent 25x75 Emergent 25x75 Emergent 25x75 Emergent 25x75 Emergent 25x75 Emergent 25x75

I am working on creating an R package for doing fire department analysis and am trying to create a function that can display emergency incident densities. The following code sort of does the trick, but I need a display that shows the number of incidents per square mile. I believe the code below shows incidents per square unit (in this case, degrees lat/long). To solve this problem, I believe that I need to convert the coordinat...

...<digitmap dialplan.digitmap="9[2-9]xx[2-9]xxxxxx|91[2-9]xx[2-9]xxxxxx" dialplan.digitmap.timeOut="3"/> <routing> <server dialplan.routing.server.1.address="10.0.17.8" dialplan.routing.server.1.port="5060"/> <emergency dialplan.routing.emergency.1.value="911" dialplan.routing.emergency.1.server.1="1"/> </routing> </dialplan> from phone1.cfg: <dialplan dialplan.1.impossibleMatchHandling="0" dialplan.1.removeEndOfDial="1" dialplan.2.impossibleMa...

NENA i2 The NENA i2 architecture was designed to support the interconnection of Voice over Internet Protocol (VoIP) domains with the existing Emergency Services Network infrastructure. This overview will describe the functional elements and call flow of a VoIP 9-1-1 call over the i2 architecture. The NENA i2 architecture was also designed to utilize existing 9-1-1 voice and data links to all existing Public Safety Answering Points (PSAPs). With...

...o's based on time the call is placed! It is called PEAK (08.00- 18.00 Mon-Fri), OFF PEAK(18.00-08.00 Mon-Fri) and WEEKEND (all other times! Could someone from any of other countries let me know if time based charging exists in your country? Also, what numbers (up to 999) are commonly used for emergency, police or other type of public services in your country?

...lplan.4.routing.server.1.address="" dialplan.4.routing.server.1.port="" dialplan.5.routing.server.1.address="" dialplan.5.routing.server.1.port="" dialplan.6.routing.server.1.address="" dialplan.6.routing.server.1.port=""/> <emergency dialplan.1.routing.emergency.1.value="" dialplan.1.routing.emergency.1.server.1="" dialplan.2.routing.emergency.1.value="" dialplan.2.routing.emergency.1.server.1="" dialplan.3.routing.emergency.1.value="" dialplan.3.routing.emergency.1.server.1=&qu...

Hiyall. Just wondering how people test your emergency dialing in the UK. Obviously you need to dial the 999 for emergency services, but am a bit unsure if this would go down too well with the operator with a 'sorry just testing' call. (you do all /test/ your emergency dialing dont you!?:-) ) As another thing, what is the correct method w...

Hi, Most companies we work with, have 'designated' crisis management teams. These vary from the insignificant crisis', through to life-threatening crisis'. There is always an assigned emergency services contact, whose job it is in an emergency, to maintain communication with the emergency services. One of our corporate functions is crisis management - so we have to consider the global repercussions and the ultra-fine detail at the same time. From considering overall redundancy of the...

I am having problems getting a Nicherons TDM400P wildcard clone to dial out. Everything appears to be configured correctly, but although I see call progress, it never seems to actually pick up the phone. (The following is a test of 911 emergency, where I substitute 811 [repair service] as the actual number dialed.) *CLI> -- Executing [911 at from-internal:1] Goto("SIP/101-00000000", "nineoneone,s,1") in new stack -- Goto (nineoneone,s,1) -- Executing [s at nineoneone:1] Set("SIP/101-00000000",...

Hi Hypothetical but quite possible scenerio: Attempted emergency 911 call but all zap channels are already in use. Is there any way to hangup zap channels before dial(Zap/g1/911) or equivalent. AFAIK hangup doesn't except options so I CANNOT do something like hangup(Zap/g1) to clear zap channels before the dial statement - this is what i was hoping to do...

I believe the 911 is a serious issue if one does an asterisk installation in an office. How do you test 911? Won't they arrest you or something for dialing 911 for no reason and talking to one of their agents who could have taken a more important call? On the other hand what an emergency comes up (like someone got seriously injured) and on top of that asterisk crashed all of a sudden bringing the whole office PBX down. Since it would be not be possible to place a call and emergency matter becomes more serious, who would be held responsible? The person who installed the PBX for not...

ESWG Consensus 12-month Report on Nomadic VoIP Technical and Operating Impediments to 9-1-1/E9-1-1 Service Delivery in Canada DRAFT Executive Summary Emergency Services Working Group (ESWG) recommends on a consensus basis the Commission order the deployment of NENA Internet-2 (i2) compliant emergency services components, systems and upgrades to result in the operation within 18 months of enhanced 9-1-1 services for nomadic and fixed/non-native VoIP caller...

After emerging some updates this morning asterisk 1.0.3 fails to start I get the following errors: ..Jan 6 00:39:24 WARNING[28998]: chan_zap.c:765 zt_open: Unable to specify channel 1: No such device or address Jan 6 00:39:24 ERROR[28998]: chan_zap.c:6197 mkintf: Unable to open channel 1: No such device or address here = 0, tmp->channel = 1, channel = 1 Jan 6 00:39:24 ERROR[28998]:

I ran into another issue with register scavenger. In my case, I don't need a place on the stack for an emergency spill slot. I have these free mips32 registers, that are not in general very useful for other things, for the emergency spill slot. I can move to and from mips16 (subset of mips32) registers and mips32 registers. I also have a situation where I need two free registers so then the possibility th...

I am trying to import a hash definition from a separate file but this fails whereas including the text verbatim in the original manifest works fine: class monitor ($master, $interface) { # import "masters.pp" $sensor_rule_categories = { ''dmzo'' => [scan,finger,ftp,telnet,rpc,rservices,ddos,dns,tftp,web- coldfusion,misc,web-php,x11,attack-responses,

...efore it would complete the boot process. No other step was required. I also tried creating a snapshot of the disk, and booted a new VM with a boot disk imaged from the snapshot. The same problem occurred, pressing Enter was all that was required. Earlier in the boot log, it shows "Started Emergency Shell", which is why there was a "Press Enter" prompt. The error that the "root account is locked" isn't the issue; the root account is locked on all our servers. So, in summary: something is causing the server to enter an Emergency Shell, but continues successfully af...

On 9/11/20 5:29 PM, Quinn Comendant wrote: > Those have always reported success (even before I removed the OnFailure option): In that case, I'd revert the change you made, unlock the root account so that you can use the emergency shell, let the system boot to an emergency shell, and collect the output of "systemctl status initrd-parse-etc.service" and "journalctl -b 0". (You can still do that in the VM, right?)

...solved by the use of register scavenger and I'm also providing an override of the virtual method saveScavengerRegister. In Mips16, I have an extra mips 32 register (not usually very useful since it can only be used in a move instruction) I can use instead of having to go to the stack for an emergency slot. On 11/10/2012 04:39 PM, Arnold Schwaighofer wrote: > CC the list. > > On Sat, Nov 10, 2012 at 6:30 PM, Arnold Schwaighofer > <arnold.schwaighofer at gmail.com> wrote: >> Assuming you use the scavenger in your own code yes. >> >> A usage could look like: &g...

Hi, Lustre manual 1.6 v18 says that that in production lustre debug level should be set to fairly low. Manual also says that I can verify that level by running following commands: # sysctl portals.debug This gives ne following error error: ''portals.debug'' is an unknown key cat /proc/sys/lnet/debug gives output: ioctl neterror warning error emerg ha config console cat

I'm confused as to the logic used in the register scavenger when it cannot find a free register. I would think that it would want to free up the emergency spill slot immediately after it's use, because otherwise there is a chance of needing to use the emergency slot again and not be able to. Instead it tries to restore it only right before register it is freeing up. Maybe I'm misunderstanding this code. // If the target knows how to s...