search for: elmer

David, Thanks again for your help today.  You're amazing. If the folks on the list could chime in - thoughts about what I could try next? May 20 19:57:28 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale pi at elmer:/home/macbackup $ lsusb Bus 002 Device 006: ID 0bc2:3343 Seagate RSS LLC Bus 002 Device 005: ID 0bc2:3343 Seagate RSS LLC Bus 002 Device 004: ID 0bc2:ab38 Seagate RSS LLC Backup Plus Hub Bus 002 Device 003: ID...

...oper <tom at cooperfamily.xyz> Sent: Wednesday, May 20, 2020 7:00 PM To: David Zomaya Cc: nut-upsuser Subject: Re: [POSSIBLE FRAUD] Re: [Nut-upsuser] [EXTERNAL] Re: Help with Tripp Lite Internet600U I'm not seeing this in the log. I'm guessing that's not great. May 20 19:57:28 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale May 20 19:57:33 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale May 20 19:57:38 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale May 20 19:57:43 elmer upsmon[3828]: Poll UPS [tripp...

...DE="0660", GROUP="nut" Reload the udev rules udevadm control --reload-rules && udevadm trigger (and maybe unplug/replug the UPS) Then sudo systemctl start nut-driver Loads the driver, and following the rest of the steps ih the howto I see this output from upsc pi at elmer:/home/macbackup $ upsc tripplite Init SSL without certificate database battery.charge: 100 battery.charge.warning: 30 battery.runtime: 1753 battery.type: PbAC battery.voltage: 0.0 battery.voltage.nominal: 12.0 device.mfr: Tripp Lite device.model: INTERNET600U device.serial: 2922BVLBC87B601706 devic...

I'm not seeing this in the log.  I'm guessing that's not great. May 20 19:57:28 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale May 20 19:57:33 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale May 20 19:57:38 elmer upsmon[3828]: Poll UPS [tripplite at localhost] failed - Data stale May 20 19:57:43 elmer upsmon[3828]: Poll UPS [tr...

...Subject: Re: [POSSIBLE FRAUD] Re: [Nut-upsuser] [EXTERNAL] Re: Help with Tripp Lite Internet600U David, That's exciting - but I am not seeing similar results. I *must* be doing something dumb - but I can't see it. I've got nut-2.7.4-8 installed on my pi Hope you can help. Tom pi at elmer:/home/macbackup $ lsusb | grep ipp Bus 001 Device 004: ID 09ae:3024 Tripp Lite pi at elmer:/home/macbackup $ sudo cat /etc/nut/nut.conf # Network UPS Tools: example nut.conf # ############################################################################## # General section #########################...

Wow - you're doing all the work for me! Thanks for the rule set.  I can't easily reboot that box just now, so I'm working on reloading the rules. When I try  udevadm control --reload-rules && udevadm trigger May 20 15:19:01 elmer systemd-udevd[3413]: Process '/sbin/crda' failed with exit code 234. May 20 15:19:01 elmer systemd-udevd[3413]: Using default interface naming scheme 'v240'. sigh.  More to learn.   I don't want to waste your time because this is not a tripp lite issue - but do you happ...

...elp with Tripp Lite Internet600U David, I appreciate the quick feedback! If I didn't fat finger any of the parameters you sent me, it's still not working. Here's the output from the attempt to start. (BTW - nothing appears in the daemon.log when I use the upsdrvctl command.) pi at elmer:/home/macbackup $ sudo vi /etc/nut/nut.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/ups.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/upsd.conf pi at elmer:/home/macbackup $ sudo upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41...

David, That's exciting - but I am not seeing similar results.  I *must* be doing something dumb - but I can't see it. I've got nut-2.7.4-8 installed on my pi Hope you can help. Tom pi at elmer:/home/macbackup $ lsusb | grep ipp Bus 001 Device 004: ID 09ae:3024 Tripp Lite pi at elmer:/home/macbackup $ sudo cat /etc/nut/nut.conf # Network UPS Tools: example nut.conf # ############################################################################## # General section #################...

...elp with Tripp Lite Internet600U David, I appreciate the quick feedback! If I didn't fat finger any of the parameters you sent me, it's still not working. Here's the output from the attempt to start. (BTW - nothing appears in the daemon.log when I use the upsdrvctl command.) pi at elmer:/home/macbackup $ sudo vi /etc/nut/nut.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/ups.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/upsd.conf pi at elmer:/home/macbackup $ sudo upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41...

David, I appreciate the quick feedback! If I didn't fat finger any of the parameters you sent me, it's still not working. Here's the output from the attempt to start.  (BTW - nothing appears in the daemon.log when I use the upsdrvctl command.) pi at elmer:/home/macbackup $ sudo vi /etc/nut/nut.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/ups.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/upsd.conf pi at elmer:/home/macbackup $ sudo upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver...

Tested a Ubuntu 18.04 LTS virtual machine with NUT 2.7.4 and a 3024 protocol Tripp Lite UPS (mine is a INTERNET550U, but same protocol) :/etc/nut$ lsusb | grep Tripp Bus 002 Device 004: ID 09ae:3024 Tripp Lite I it got generally working (outputting reasonable responses to upsc, although there are some issues with variables like frequency) by adding productid=3024 to my ups.conf. Like this:

...pp Lite Internet600U   David, I appreciate the quick feedback! If I didn't fat finger any of the parameters you sent me, it's still not working. Here's the output from the attempt to start.  (BTW - nothing appears in the daemon.log when I use the upsdrvctl command.) pi at elmer:/home/macbackup $ sudo vi /etc/nut/nut.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/ups.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/upsd.conf pi at elmer:/home/macbackup $ sudo upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver...

...60", GROUP="nut" Reload the udev rules  udevadm control --reload-rules && udevadm trigger (and maybe unplug/replug the UPS) Then  sudo systemctl start nut-driver Loads the driver, and following the rest of the steps ih the howto I see this output from upsc pi at elmer:/home/macbackup $ upsc tripplite Init SSL without certificate database battery.charge: 100 battery.charge.warning: 30 battery.runtime: 1753 battery.type: PbAC battery.voltage: 0.0 battery.voltage.nominal: 12.0 device.mfr: Tripp Lite device.model: INTERNET600U device.serial: 2922BVLBC87B60...

...elp with Tripp Lite Internet600U David, I appreciate the quick feedback! If I didn't fat finger any of the parameters you sent me, it's still not working. Here's the output from the attempt to start. (BTW - nothing appears in the daemon.log when I use the upsdrvctl command.) pi at elmer:/home/macbackup $ sudo vi /etc/nut/nut.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/ups.conf pi at elmer:/home/macbackup $ sudo vi /etc/nut/upsd.conf pi at elmer:/home/macbackup $ sudo upsdrvctl start Network UPS Tools - UPS driver controller 2.7.4 Network UPS Tools - Generic HID driver 0.41...

I''ve got a form with inputs like user[first_name], user[last_name], etc. When editing the user instead of creating a new one I include a user[id]. I then try and save the object using: user = User.new(params[:user]) user.save() I would *expect* that since I included the user[id] it should do an update and should call validate_on_update. But this doesn''t appear to be the

I'm trying to set up a CIFS mount to a NetApp F840 called 'elmer' over an SSH tunnel. I also tunnel the Kerberos ports to the Windows AD server 'cannonstreet' Using Ubuntu hardy, with recent updates for CIFS that are claimed to work: https://bugs.launchpad.net/ubuntu/+source/samba/+bug/236830 I tunnel like this: ssh -f -N -x -o TCPKeepAlive=yes...

I''m very new to Rails and I''m quite confused if I can practice Rails in offline mode? I''m following the Ruby on Rails Tutorail by Michael Hartl and I noticed that after generating a new app through the command "rails new app_name", "bundle install" is then called to download the gems specified in the Gemfile. What if I don''t have an

Hello, Does anyone test ZFS on Linux and ACLs? I can't setup POSIX ACLs and any extended even using acl_xattr or acl_tdb. Is any way to use ACLs with ZFS on Linux (Samba 3 or 4)? Best regards /Adrian Berlin --

WTF was this about? http://www.flickr.com/photos/planetargon/127984254/ Joe -- Posted via http://www.ruby-forum.com/.

...can browse using a different firewall. Trying to find out where the logs are located and what log files it would write to if it were to deny browsing to a website. I can see the [UNREPLIED] when using the shorewall status. Was hoping to know what logfile it is writing it to. Thanks in advance, Elmer -=-=-=-=-=-=-=-=-=- Shorewall-2.0.7 Status at hilo.webmerch.com - Wed Aug 4 18:10:30 PDT 2004 Counters reset Wed Aug 4 18:03:52 PDT 2004 Chain INPUT (policy DROP 4 packets, 1208 bytes) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- l...