search for: echocancell

Displaying 20 results from an estimated 1238 matches for "echocancell".

Did you mean: echocancel
2014 Aug 01
1
load testing and pattern testing sangoma A116 card
...# YES: receive dtmf events from hardware TDMV_HW_FAX_DETECT = NO # YES: receive fax 1100hz events from hardware [w1g1] ACTIVE_CH = ALL TDMV_HWEC = YES MTU = 8 /etc/dahdi/system.conf: defaultzone=be loadzone=be span=1,1,0,ccs,hdb3 dchan=16 bchan=1-15,17-31 echocanceller=mg2,1-15,17-31 span=2,2,0,ccs,hdb3 dchan=47 bchan=32-46,48-62 echocanceller=mg2,32-46,48-62 span=3,3,0,ccs,hdb3 dchan=78 bchan=63-77,79-93 echocanceller=mg2,63-77,79-93 span=4,4,0,ccs,hdb3 dchan=109 bchan=94-108,110-124 echocanceller=mg2,94-108,110-124 span=5,5,0,ccs,hdb3 dchan=140 bchan=125-...
2007 Sep 17
2
Echocancellation on windows
Hi all, does anybody has ran echocancellation successfully on windows ? I have a problem playing audio there. If you play a wav file no mater how I play it after comparing the captured data with the original file there is always difference in the audio length (for 18 sec of audio there is more than 250 ms of difference). Which of cours...
2006 Jan 14
4
Ugly echo cancel, with Bristuff/Zaphfc
I'm using bristuffed Asterisk with ISDN/ZAPHFC I have VERY ugly (outgoing) sound through ISDN/HFC if echocancel=yes in zapata.conf, but without echocancel I have bad (incoming) echo Through PSTN/FXO sound is ok with or without echocancel. I tried other echo cancellers (in zconfig.h) two times: ECHO_CAN_KB1 (this was default) ECHO_CAN_MARK2 ECHO_CAN_MG2 after any change I compiled (make
2011 Apr 07
0
Asterisk 1.8.x Skips DTMF Digits on a First DAHDI Initiated Call
...enconf on Sun Sep 26 00:01:18 2010 # If you edit this file and execute /usr/sbin/dahdi_genconf again, # your manual changes will be LOST. # Dahdi Configuration File # # This file is parsed by the Dahdi Configurator, dahdi_cfg # # Span 1: WCTDM/0 "Wildcard TDM410P Board 1" (MASTER) fxsks=1 echocanceller=hpec,1 fxsks=2 echocanceller=hpec,2 fxsks=3 echocanceller=hpec,3 # channel 4, WCTDM/0/3, no module. # Span 2: WCTDM/4 "Wildcard TDM400P REV I Board 5" fxoks=5 echocanceller=hpec,5 fxoks=6 echocanceller=hpec,6 fxoks=7 echocanceller=hpec,7 fxoks=8 echocanceller=hpec,8 # Global data loa...
2010 May 18
1
Callerid with DAHDI
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all! I'm testing a telephone connected to FXS port of a Sangoma A200 card. But I'm observing that callerid is not working. The configuration that I'm using in chan_dahdi.conf is the following one: - --------------------------------------------------------------------- ;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
2010 Aug 23
1
Dahdi install gone wrong
...enconf again, * # your manual changes will be LOST. * # Dahdi Configuration File * # * # This file is parsed by the Dahdi Configurator, dahdi_cfg * # * # Global data * * loadzone = us * defaultzone = us * * # Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER) * fxsks=1 * #echocanceller=mg2,1 * fxsks=2 * #echocanceller=mg2,2 * fxsks=3 * #echocanceller=mg2,3 * fxsks=4 * #echocanceller=mg2,4 * fxsks=5 * #echocanceller=mg2,5 * fxsks=6 * #echocanceller=mg2,6 * fxsks=7 * #echocanceller=mg2,7 * fxsks=8 * #echocanceller=mg2,8 Can you include the germane part of the dial...
2010 Sep 01
2
Freepbx + Asterisk problem - NEED HELP
...210885 12 dahdi_echocan_mg2,xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,dahdi_voicebus,wct4xxp crc_ccitt 1675 2 dahdi,hisax it seems my dahdi/system.conf is ok. # Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER) fxsks=1 echocanceller=mg2,1 fxsks=2 echocanceller=mg2,2 fxoks=3 echocanceller=mg2,3 fxoks=4 echocanceller=mg2,4 # Global data loadzone = tr defaultzone = tr And this is zapata.conf: [channels] language=en ; include zap extensions defined in AMP #include zapata_additional.conf ; XTDM20B Port #1,2 plugged int...
2004 Jan 25
2
Example of TDM20B
I am trying to find an example of how to set up my FXS Station Card in my Asterisk. I have (1) XP100P I have (1) tdm20B (2 Port FXS) Could someone tell me if this is correct? /etc/zaptel.conf fxsks=1 fxoks=2 fxoks=3 loadzone=us defaultzone=us /etc/asterisk/zapata.conf [channels] ; language=en ; ;X100P Port 1 context=inbound-analog signalling=fxs_ks usecallerid=yes echocancel=yes
2005 Feb 17
5
PRI and echocancel
Hello, I have a crossover PRI(Asterisk server to PBX) and a regular telco PRI T1 line and currently have echocancel=yes and echocancelwhenbridged=yes on those spans in zapata.conf. I was discussing CPU load with another Asterisk user and he mentioned that PRIs don't need echo cancelation and that turning it off will reduced CPU load on the server. I checked many sample configs and the
2008 Sep 05
1
dahdi & tdm400p: no luck
As best i could figure it out, I've installed dahdi and rc4. My TDM400P doesn't answer fxo or fxs. /etc/dahdi/system.conf: loadzone = us defaultzone=us fxoks=1,2 fxsks=4 /etc/asterisk/chan_dahdi.conf: [house-phones] context=internal ; Uses the [internal] context in extensions.conf signalling=fxo_ks ; fxo_ks Use FXO signalling for an FXS chanel dahdichan => 1 ;
2009 Sep 02
4
More Echo
<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN"> <html> <head> </head> <body bgcolor="#ffffff" text="#000000"> <span class="postbody">Greetings,<br> I am running Asterisk 1.4.25 with Dahdi Complete 2.2.0, on a Digium TE121B PCI express card with a </span>VPMADT032<span
2009 Sep 29
1
Fax and dial-up connection issues
...eally appreciated. /etc/dahdi/system.conf: loadzone=br defaultzone=br span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 hardhdlc=16 span=2,0,0,ccs,hdb3,crc4 bchan=32-46,48-62 hardhdlc=47 span=3,0,0,ccs,hdb3,crc4 bchan=63-77,79-93 hardhdlc=78 span=4,0,0,ccs,hdb3,crc4 bchan=94-108,110-124 hardhdlc=109 echocanceller=oslec,125-162 echocanceller=oslec,163-200 echocanceller=oslec,201-238 echocanceller=oslec,239-254 fxoks=125-162 fxoks=163-200 fxoks=201-238 fxsls=239-254 /etc/asterisk/chan_dahdi.conf: [trunkgroups] [channels] language=pt_BR group=1 switchtype=euroisdn pridialplan=unknown prilocaldialplan=u...
2007 Sep 17
0
Echocancellation on windows
> does anybody has ran echocancellation successfully on windows ? > I have a problem playing audio there. If you play a wav file no mater > how I play it after comparing the captured data with the original file > there is always > difference in the audio length (for 18 sec of audio there is more than > 250 ms of di...
2005 Jan 19
1
echocancellation in modem.conf
I have a ISDN BRI card with hisax module (w6692) and there is a lot of echo when I make calls to outside. Between the sip softphones the echo doesn't exist, but when I call to outside through the ISDN the echo exist. Is there any sense to put echocancellation in modem.conf ? ___________________________________________________ Nueva tecnología de Yahoo! Búsquedas ¿te atreves a comparar? http://busquedas.yahoo.es
2010 Jul 19
1
digium HW echocancellation - fax tone detection
Hello ! I 'm using a TE405P with a HW echocanceller module attached on it. dahdi version is dahdi-linux-complete-2.2.0.2+2.2.0. As far as I know, the fax tone detection is done on the FW board. How can I verify that the echo canceller has been turned off ? When I do a cat /proc/dahdi/1 for span 1 I see still the VPM450 entry near the channel alt...
2009 Jun 18
2
dahdi and overlapdial problem
...rlapdial=no ;Sangoma A101 port 1 [slot:5 bus:3 span:1] <wanpipe1> switchtype=euroisdn echocancel=yes signalling=pri_cpe channel =>1-15,17-31 /etc/dahdi/system.conf: # Span 1: WPE1/0 "wanpipe1 card 0" (MASTER) HDB3/CCS/CRC4 span=1,1,0,ccs,hdb3,crc4 # termtype: te bchan=1-15,17-31 echocanceller=mg2,1-15,17-31 hardhdlc=16 # Global data loadzone = de defaultzone = de Any hints? Thanks! Regards, Bjoern
2011 Feb 17
1
Setting two E1 cards
Dear, I always had one E1 card with one span, so I've never had any problem in set it up through /etc/dahdi/sustem.conf and /etc/asterisk/chan_dahdi.conf because I put span=1. But now I have a PBX with two E1 cards with 4 span (8 span in total). How do I have to define both card in system.conf and chan_dahdi.conf, and how do I have to refer each span to the corresponding card ??? Thanks a
2009 Sep 27
2
DAHDI congestion problem
...hanks, Andy /etc/dahdi/system.conf # Autogenerated by /usr/sbin/dahdi_genconf on Wed Jun 10 22:20:05 2009 -- do not hand edit # Dahdi Configuration File # # This file is parsed by the Dahdi Configurator, dahdi_cfg # # Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER) fxols=1 #echocanceller=mg2,1 fxols=2 #echocanceller=mg2,2 # channel 3, WCTDM/4/2, no module. fxsks=4 echocanceller=mg2,4 # Global data loadzone = us defaultzone = us dahdi show status Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO Wildcard TDM400P REV E/F Boar...
2007 Mar 15
2
Help! Echo problem even at T1 PRI?
Hello, We have an asterisk setup at our client's site using a TE205P. The line to telco is a 23 channels T1 PRI, however the line has random echo problems (about 5-10% of the calls)! Can anybody tell me if echo cancellation is really needed even at a T1 PRI to the telco? Because people keep saying when they deploy voip solution in Hong Kong using T1 PRI, there is no need of echo cancellation.
2004 Dec 30
1
Weird..bridging to Zap channel FXS instead of bridging to PSTN FXO on outgoing group
Hi All, Channels 25-28 on a customers PBX are regular Zaptel FXO cards that are hooked into 4 incomming phone lines. They are all in a group to do automatic rollover for outgoing calls (if channel 25 is being used, dial on channel 26, etc.). Sometimes when a user is dialing a number, instead of bridging to one of the FXO cards it goes and rings to Zap/1-1. This doesnt occur all the time but some