Displaying 20 results from an estimated 1238 matches for "echocancel".
2014 Aug 01
1
load testing and pattern testing sangoma A116 card
...# YES: receive dtmf events from hardware
TDMV_HW_FAX_DETECT = NO # YES: receive fax 1100hz
events from hardware
[w1g1]
ACTIVE_CH = ALL
TDMV_HWEC = YES
MTU = 8
/etc/dahdi/system.conf:
defaultzone=be
loadzone=be
span=1,1,0,ccs,hdb3
dchan=16
bchan=1-15,17-31
echocanceller=mg2,1-15,17-31
span=2,2,0,ccs,hdb3
dchan=47
bchan=32-46,48-62
echocanceller=mg2,32-46,48-62
span=3,3,0,ccs,hdb3
dchan=78
bchan=63-77,79-93
echocanceller=mg2,63-77,79-93
span=4,4,0,ccs,hdb3
dchan=109
bchan=94-108,110-124
echocanceller=mg2,94-108,110-124
span=5,5,0,ccs,hdb3
dchan=140
bchan=125...
2007 Sep 17
2
Echocancellation on windows
Hi all,
does anybody has ran echocancellation successfully on windows ?
I have a problem playing audio there. If you play a wav file no mater
how I play it after comparing the captured data with the original file
there is always
difference in the audio length (for 18 sec of audio there is more than
250 ms of difference). Which of cour...
2006 Jan 14
4
Ugly echo cancel, with Bristuff/Zaphfc
I'm using bristuffed Asterisk with ISDN/ZAPHFC
I have VERY ugly (outgoing) sound through ISDN/HFC if echocancel=yes in
zapata.conf, but without echocancel I have bad (incoming) echo
Through PSTN/FXO sound is ok with or without echocancel.
I tried other echo cancellers (in zconfig.h) two times:
ECHO_CAN_KB1 (this was default)
ECHO_CAN_MARK2
ECHO_CAN_MG2
after any change I compiled (make clean all &&...
2011 Apr 07
0
Asterisk 1.8.x Skips DTMF Digits on a First DAHDI Initiated Call
...enconf on Sun Sep 26 00:01:18 2010
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: WCTDM/0 "Wildcard TDM410P Board 1" (MASTER)
fxsks=1
echocanceller=hpec,1
fxsks=2
echocanceller=hpec,2
fxsks=3
echocanceller=hpec,3
# channel 4, WCTDM/0/3, no module.
# Span 2: WCTDM/4 "Wildcard TDM400P REV I Board 5"
fxoks=5
echocanceller=hpec,5
fxoks=6
echocanceller=hpec,6
fxoks=7
echocanceller=hpec,7
fxoks=8
echocanceller=hpec,8
# Global data
lo...
2010 May 18
1
Callerid with DAHDI
...usr/sbin/wancfg_dahdi do not hand edit
;autogenrated on 2010-05-11
;Dahdi Channels Configurations
;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak
[trunkgroups]
[channels]
language=es
defaultzone=es
usecallerid=yes
hidecallerid=no
callwaiting=no
threewaycalling=yes
transfer=yes
echocancel=yes
echotraining=yes
inmediate=no
; DGB - 20100322
busydetect=yes
busycount=3
;Sangoma AFT-A200 [slot:8 bus:1 span:1] <wanpipe1>
context=from-internal
group=1
echocancel=yes
signalling = fxo_ks
channel => 1
mailbox=300 at voicemail
callerid="Jane Doe" <300>
context=fro...
2010 Aug 23
1
Dahdi install gone wrong
...* ; Whether or not to do distinctive ring detection on FXO lines
* ;
* ;usedistinctiveringdetection=yes
*
* usecallerid=yes
* hidecallerid=no
* callwaiting=yes
* usecallingpres=yes
* callwaitingcallerid=yes
* threewaycalling=yes
* transfer=yes
* cancallforward=yes
* callreturn=yes
* echocancel=yes
* echocancelwhenbridged=no
* ;echotraining=800
* rxgain=0.0
* txgain=0.0
* group=0
* callgroup=1
* pickupgroup=1
* immediate=no
*
* ;faxdetect=both
* faxdetect=incoming
* ;faxdetect=outgoing
* ;faxdetect=no
*
* ;Include setup-pstn configs
* #include dahdi-channels.conf
*
*...
2010 Sep 01
2
Freepbx + Asterisk problem - NEED HELP
...210885 12
dahdi_echocan_mg2,xpp,dahdi_transcode,wcb4xxp,wctdm,wcfxo,wctdm24xxp,wcte11xp,wct1xxp,wcte12xp,dahdi_voicebus,wct4xxp
crc_ccitt 1675 2 dahdi,hisax
it seems my dahdi/system.conf is ok.
# Span 1: WCTDM/4 "Wildcard TDM400P REV I Board 5" (MASTER)
fxsks=1
echocanceller=mg2,1
fxsks=2
echocanceller=mg2,2
fxoks=3
echocanceller=mg2,3
fxoks=4
echocanceller=mg2,4
# Global data
loadzone = tr
defaultzone = tr
And this is zapata.conf:
[channels]
language=en
; include zap extensions defined in AMP
#include zapata_additional.conf
; XTDM20B Port #1,2 plugged in...
2004 Jan 25
2
Example of TDM20B
...terisk.
I have (1) XP100P
I have (1) tdm20B (2 Port FXS)
Could someone tell me if this is correct?
/etc/zaptel.conf
fxsks=1
fxoks=2
fxoks=3
loadzone=us
defaultzone=us
/etc/asterisk/zapata.conf
[channels]
;
language=en
;
;X100P Port 1
context=inbound-analog
signalling=fxs_ks
usecallerid=yes
echocancel=yes
echocancelwhenbridged=yes
channel => 1
;
; FXS Port 1
context=local
signalling=fxs_ls
usecallerid=yes
echocancel=yes
echocancelwhenbridged=yes
;
;FXS Port 2
context=local
signalling=fxs_ls
usecallerid=yes
echocancel=yes
echocancelwhenbridged=yes
/etc/asterisk/extensions.conf
[local]
exte...
2005 Feb 17
5
PRI and echocancel
Hello,
I have a crossover PRI(Asterisk server to PBX) and a regular telco PRI T1
line and currently have echocancel=yes and echocancelwhenbridged=yes on
those spans in zapata.conf. I was discussing CPU load with another Asterisk
user and he mentioned that PRIs don't need echo cancelation and that turning
it off will reduced CPU load on the server. I checked many sample configs
and the archives and noticed th...
2008 Sep 05
1
dahdi & tdm400p: no luck
As best i could figure it out, I've installed dahdi and rc4.
My TDM400P doesn't answer fxo or fxs.
/etc/dahdi/system.conf:
loadzone = us
defaultzone=us
fxoks=1,2
fxsks=4
/etc/asterisk/chan_dahdi.conf:
[house-phones]
context=internal ; Uses the [internal] context in extensions.conf
signalling=fxo_ks ; fxo_ks Use FXO signalling for an FXS chanel
dahdichan => 1 ;
2009 Sep 02
4
More Echo
...know the echo cancellation is working, however when I call a local
analog land line, I get discernible echo.<br>
<br>
Here is my chan_dahdi.conf:<br>
<br>
[channels]<br>
; configuration for T1 card as PRI<br>
language = en<br>
<br>
group = 1<br>
echocancel = yes<br>
echotraining = yes<br>
signalling = pri_cpe<br>
switchtype = 4ess<br>
usecallerid = yes<br>
context = incoming<br>
channel => 1-23<br>
<br>
Someone has to have had some experience with these hardware echo
cancellers, any ideas? Should I a...
2009 Sep 29
1
Fax and dial-up connection issues
...o the other end. Not connecting at all (and stating COMMUNICATION ERROR) is not uncommon. As of dial-up connections, of course I'm not expecting to get 33600 on that, but this customer has some dedicated systems that must dial the "mothership" and use low speeds like 9600. I also have echocancelwhenbridged=no set up on all PRI and FXS channels.
I really don't know what else I could do to solve the problem. xpp_sync is set to DAHDI so the same sync received from telco is used on the FXS ports. For the TE420, only two spans are being used today. One of them is set as the sync master (1)...
2007 Sep 17
0
Echocancellation on windows
> does anybody has ran echocancellation successfully on windows ?
> I have a problem playing audio there. If you play a wav file no mater
> how I play it after comparing the captured data with the original file
> there is always
> difference in the audio length (for 18 sec of audio there is more than
> 250 ms of d...
2005 Jan 19
1
echocancellation in modem.conf
I have a ISDN BRI card with hisax module (w6692) and there is a lot of echo
when I make calls to outside. Between the sip softphones the echo doesn't
exist, but when I call to outside through the ISDN the echo exist.
Is there any sense to put echocancellation in modem.conf ?
___________________________________________________
Nueva tecnología de Yahoo! Búsquedas
¿te atreves a comparar?
http://busquedas.yahoo.es
2010 Jul 19
1
digium HW echocancellation - fax tone detection
Hello !
I 'm using a TE405P with a HW echocanceller module attached on it.
dahdi version is dahdi-linux-complete-2.2.0.2+2.2.0.
As far as I know, the fax tone detection is done on the FW board.
How can I verify that the echo canceller has been turned off ?
When I do a cat /proc/dahdi/1 for span 1 I see still the VPM450 entry
near the channel al...
2009 Jun 18
2
dahdi and overlapdial problem
...di-linux-2.1.0.4.tar.gz
dahdi-tools-2.1.0.2.tar.gz
wanpipe-3.4.1.tgz
chan_dadhi.conf:
[trunkgroups]
[channels]
context=from-pstn
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
internationalprefix=00
nationalprefix=0
overlapdial=no
;Sangoma A101 port 1 [slot:5 bus:3 span:1] <wanpipe1>
switchtype=euroisdn
echocancel=yes
signalling=pri_cpe
channel =>1-15...
2011 Feb 17
1
Setting two E1 cards
Dear, I always had one E1 card with one span, so I've never had any
problem in set it up through /etc/dahdi/sustem.conf and
/etc/asterisk/chan_dahdi.conf because I put span=1.
But now I have a PBX with two E1 cards with 4 span (8 span in total).
How do I have to define both card in system.conf and chan_dahdi.conf,
and how do I have to refer each span to the corresponding card ???
Thanks a
2009 Sep 27
2
DAHDI congestion problem
...hanks,
Andy
/etc/dahdi/system.conf
# Autogenerated by /usr/sbin/dahdi_genconf on Wed Jun 10 22:20:05 2009 -- do not hand edit
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER)
fxols=1
#echocanceller=mg2,1
fxols=2
#echocanceller=mg2,2
# channel 3, WCTDM/4/2, no module.
fxsks=4
echocanceller=mg2,4
# Global data
loadzone = us
defaultzone = us
dahdi show status
Description Alarms IRQ bpviol CRC4 Fra Codi Options LBO
Wildcard TDM400P REV E/F Boa...
2007 Mar 15
2
Help! Echo problem even at T1 PRI?
...T1 PRI
to the telco? Because people keep saying when they deploy voip solution in
Hong Kong using T1 PRI, there is no need of echo cancellation. (even the
local Digium distributor)
Asterisk is 1.2.13, zaptel is 1.2.10. I choosed the MARK2 canceller in the
zaptel.
The setting in zaptel is default:
echocancel=yes
echocancelwhenbridged=yes
echotraining=yes
rxgain=0
txgain=0
When I tried to adjust the echocancel value to a higher taps (e.g. 256) or
adjust the rxgain/txgain value, I can even hear echo much easier.
Anyone can confirm with me we should rather turn echocancelwhenbridged=no,
or even echocanc...
2004 Dec 30
1
Weird..bridging to Zap channel FXS instead of bridging to PSTN FXO on outgoing group
...1-1 is ringing
Extensions.conf context for outgoing calls
exten => _1NXXNXXXXXX,1,Dial(Zap/g3/ww${EXTEN})
exten => _NXXNXXXXXX,1,Dial(Zap/g3/w1${EXTEN})
exten => _NXXXXXX,1,Dial(Zap/g3/ww${EXTEN})
Zapata.conf snippet for the group
context=from-pstn
signalling=fxs_ks
callerid=asrecieved
;echocancel=yes
;echocancelwhenbridged=yes
;echotraining=400
rxgain=10.0
txgain=-4.5
group=3
channel => 25
context=from-pstn
signalling=fxs_ks
callerid=asrecieved
;echocancel=yes
;echocancelwhenbridged=yes
;echotraining=400
rxgain=12.0
txgain=-4.5
group=3
channel => 26
context=from-pstn
signalling=fxs_...