search for: e6750

I am building a Centos machine for a specific piece of third party software. Can I assume that the IA64 verson of CENTOS 4.5 will run on this CPU? Are there any differences in basic libraries between 4.0 and 4.5? Art Edwards

Hi folks, before I flood the bug tracking system, I just want to send you a list of problems I encountered when using xen under Debian Etch (i386 on Intel Core2 Duo E6750). Shall I open a seperate bug report for each of the items below or are some of them features that are known to be missing in the xen release? - A HVM domain does not start when using a physical disk without specifing the full path to the device, e.g.: 'phy:vg0/lv5-domU-windows,hda,w'...

Dear, I''m looking to get Xen running on a system that (afterwards) seems a bit too new. The board has the Intel G33 chipset with the Intel ICH9 southbridge. This chipset is NOT supported by kernel 2.6.18 which ships with Xen 3.1.2 (and Debian Etch). So the question is: * What version of Xen to install to get going? Should I choose unstable? * What distribution will be the easiest to get

Today we tried to update machines w/ Core2 Duo E6750 from 3.10.0-693.11.1.el7.centos.plus to 3.10.0-693.11.6.el7.centos.plus and the machines did not boot due to a kernel panic. Before we dig any further I wanted to know if the 11.6 kernel has been tested on old hardware, too, or if the problem is well known but not documented (yet). Thank you in...

Hi all, On dual core processor machine, I installed ubuntu-8.04 in which I installed xen-3.2. In ubuntu: # cat /proc/cpuinfo --> Shows two processors information. But in Xen on the same machine: # cat /proc/cpuinfo --> Shows only one processor information. Can anyone please explain what could be the reason behind this? Thanks Saravana

Hi, I''ve recently setup a few machines with 3.2 64bit without any unresolvable problem. These machines all run pv domU''s and a view "basic" hvm domUs. As I''ve got one machine left for internal use and testing, I would like to take a look at pciback with VT-d support (bios screen shows a VT-d [enable|disable]). My question is, do I need to add patches, or use

Hi, I''ve recently setup a few machines with 3.2 64bit without any unresolvable problem. These machines all run pv domU''s and a view "basic" hvm domUs. As I''ve got one machine left for internal use and testing, I would like to take a look at pciback with VT-d support (bios screen shows a VT-d [enable|disable]). My question is, do I need to add patches, or use

...ic_id 2, version 32, address 0xfec00000, GSI 0-23 (XEN) Enabling APIC mode: Flat. Using 1 I/O APICs (XEN) Using scheduler: SMP Credit Scheduler (credit) (XEN) Detected 2666.753 MHz processor. (XEN) HVM: VMX enabled (XEN) VMX: MSR intercept bitmap enabled (XEN) CPU0: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b (XEN) Mapping cpu 0 to node 255 (XEN) Booting processor 1/1 eip 90000 (XEN) Mapping cpu 1 to node 255 (XEN) CPU1: Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz stepping 0b (XEN) Total of 2 processors activated. (XEN) ENABLING IO-APIC IRQs (XEN) -> Using new ACK method (...

...game and I maximize it, sometimes I can just keep playing happily but sometimes thats not the case. I minimize it, maximize it again and the FPS drops to about 10-20fps (anywhere). As you might know, this is VERY annoying, I've tried changing loads of settings in-game with no help. Hardware: E6750 C2D (stock) 8800GT 512 (high performance, stock) 4GB Ram (stock) Xorg.conf: Code: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildmeister at builder62) Thu Feb 5 00:09:30 PST 2009 # nvidia-xconfig: X configuration file generated by n...

hi @all, i?m having big problems implementing a pae-kernel. i?m using centos5 on following hw intel core2duo 2,66 e6750 gigabyte p35-ds3p board 8 gb ram 4 * samsung_sata_hd501lj nvidia geforce 8500gt i can use a xen-pae kernel without having problems, but as i need to run vmware, it?s not a valid option to keep that kernel. the default kernel (which supports only up to 4gb ram) works fine, too. as soon as i boo...

Anyone using either Glusterfs or DRBD in their mail setup? How is performance, manageability? Problems? Tips? Ed W

...etty much running out of options. It's there limitation in R as the number of files it can create in one session? Is it a windows problem? Is there better way to clear the memory than gc()? Any thought on that? I'm using R 2.11.1, win XP, my hard drive is NTSF, computer: intel core2 duo E6750 32 bit with 2 gig of Ram. Here is my code, but I doubt it would help much with my problem: ######## # It made of 4 functions (sorry, it's french): ########################################################################## ######################################################################...

...diagnose this? Should I better get my backup restored asap? Unfortunately all my mail and most network services are on the HVM domains, so the network is slow (missing DNS) and I''m missing quite a few facilities! So HELP please!!! - Joris === *Configuration* Hardware Intel Core 2 Duo E6750 2.66 GHz (clocked at 2.0 GHz) Intel PRO/1000 NIC (eth0) Realtek RTL8168b/8111b (eth1) Hypervisor: Gentoo 2007, Xen 3.2.1. 64-bit (XEN) Xen version 3.2.1 (root@joris2k.local) (gcc version 3.4.6 (Gentoo Hardened 3.4.6-r2 p1.5, ssp-3.4.6-1.0, pie-8.7.10)) Sun Jun 15 19:54:30 CEST 2008 Dom0: Gentoo 2...

...gged and then plugged back to card. Of course, I don't want to do this job everytime when server restarted :-). Searching over internet, it say that I must disable echotraining, but the problem still persist. System: Asterisk 1.4.22-rc5 (Elastix 1.3-2) OS: Centos 5.2 Core 2 Duo Processor E6750 @ 2.66GHz $ dmesg | egrep '(echo|tone|Zap|Zap|TDM|Module)' zaptel: no version for "oslec_echo_can_traintap" found: kernel tainted. Zapata Telephony Interface Registered on major 196 Zaptel Version: 1.4.11 Zaptel Echo Canceller: OSLEC Zaptap registered 'sample' char drive...

According to the AppDB it should work just fine but I'm having some problems and the search for the forums on "Baldur", "Bhaal" and "ToB" give no results. The game installed just fine. All the community mods installed fine. The game config file runs fine except for the display setting sections; after a the automated setting test I do not get the popup asking if

Hey guys, I'm a new Ubuntu convert (installed through Wubi, and am blown away!) I'd love to get wine working so I play games etc, but I've got a lot of learning to do when it comes to installing and getting things working. So, I want to use the 1.0-rc1 version of wine, but CoD4 requires the 3dmark.diff patch. This is what I think I need to be doing: with the 3dmark.diff file

..._is_ an /etc/xinetd.d, and I have no idea what is causing this. I even went back, removed the 1.0.7 server and installed the 1.0.6 server, which I think is that last one I installed at home, and that got the same error (actually, the above is from the 1.0.6 install). My new h/w: Intel Core 2 Duo E6750 2.66GHz, 2GB 667MHz DDR2 RAM, 160GB hard drive, nvidia ge7300fs video card, not sure what mobo, but I can't help but wonder if that has anything to do with it (does it???). Running CentOS 5.2 32-bit with all the latest updates. Anyone know anything about this? I asked in the VMWare forums, b...

...URSORICON_LoadFromFile No support for .ani cursors. fixme:cursor:CURSORICON_LoadFromFile No support for .ani cursors. fixme:cursor:CURSORICON_LoadFromFile No support for .ani cursors. Code: uname -a Linux nova 2.6.21.5-smp #2 SMP Sun Mar 16 22:01:24 MDT 2008 i686 Intel(R) Core(TM)2 Duo CPU E6750 @ 2.66GHz GenuineIntel GNU/Linux Slackware 12.0 Nvidia 8800 GT 512MB PCIx16 4GB Ram No compiz Wine 1.1.2 Any suggestions?

...quot;, and thus expired. Here's a link to the AppDB page (still out of date at this point): http://appdb.winehq.org/appview.php?iVersionId=8371 One major change (besides the Wine version) has occurred since I last tried running Composer: my computer. I am currently running an Intel Core 2 Duo E6750, Gigabyte P35-DS3L motherboard, onboard Intel HD audio, SATA HDD. On the software side, I run Slackware-current with a 2.6.24.3 kernel compiled with SMP support. Here is the backtrace: wine: Unhandled page fault on read access to 0x0000009c at address 0x7eb90a20 (thread 0009), starting debugger.....

...ng 18 months maybe more. The above system was built on ageing hardware that used to be a Win 2k server that died from OS corruption. Due to the expanding client needs there was good reason to replace the old box. The new system is based on a Supermicro server board with an Intel Core2 Duo CPU E6750, 8G RAM and 4 500G HDD's as two software RAID mirrors. This Machine was installed with CentOS 5 and Samba updated to 3.0.25c instead of the supplied 3.0.25b as the previous setup had suffered an inability to change passwords from Win2k3 with any prior version. Openldap and Samba were config...