search for: e1000g

Matt Ingenthron wrote: > This may be specific to my hardware, but I cannot get things to behave > reliably on my system. For instance, I''ve had situations under xVM dom0 > where snv81 can see the e1000g interface with dladm show-dev, but not > plumb it. Then one boot later, I can''t see it with dladm, but can plumb > and up it with DHCP. Are there any e1000g driver error / warning messages logged to /var/adm/messages or the console, when the system has booted and the e1000g devic...

Author: szhou Repository: /hg/zfs-crypto/gate Revision: 47e5c553760ca02d7f7f83b1d8a08e7a5d531e54 Log message: 6275104 Can''t use pxegrub to boot off e1000g on v65x 6277640 "available" devinfo property for PCI-PCI bus node is incorrect on intlhotp-1.west system 6286065 "No ethernet found "message under Grub on Dell Precision MT system 6301048 Solaris banner missing when serial line speed is specified on grub line Files: update: us...

The network fails for the zone when i try to setup it with ip-type exclusive. Its on a vmware server 1.0.2 using a emulated e1000g, this is the only current way i have got to test it with :( Any ideas on how to find out what the problem is? Is it that the emulation done by vmware can''t do this? I think it would be useful for this to work in vmware, as you can add many virtual nics to an install to play with this s...

...have a Toshiba Tecra M9 and have not been able to boot it dom0. This is running SXDE 01/08, snv79b. After booting under kmdb and setting moddebug=80000000 before booting the Solaris kernel (with help from Dan Mick), I was able to see mac_ether as the last thing loading, right after loading the e1000g driver. I cannot drop into kmdb via F1-A after it hangs. I''ve also tried booting 32-bit, but had the same behavior. Any recommendations? Is there any data I can gather? I searched both the solaris/driver and solaris/xvm bugs, with not hits. Thanks in advance, - Matt -- Matt Ing...

...zones. My test host persephone, is a virtual machine running under VMware ESXi 3.5, with 2 virtual network cards (e1000), all on the same flat network/subnet. It started life just 2 days ago with a clean install of snv_95, and I LUed to 105 yesterday. To rule out any sharing issue, the first nic (e1000g0) is used only for the global zone. The second nic is used only by crossbow, for the vnic "zonevnic0", which is bound to e1000g1. sparse-template is the zone that I''ve been trying to get to work using a dedicated IP instance using the vnic zonevnic0. Using snoop in the zone, (or...

...error, but v40z report checksum error, using dtrace we found following stack during checksum error: dtrace: description ''udpInCksumErrs '' matched 2 probes CPU ID FUNCTION:NAME 2 842 ipcl_tcpconn_cache:udpInCksumErrs ip`ip_input+0x729 dls`i_dls_link_ether_rx+0x153 mac`mac_rx+0x46 e1000g`e1000g_intr_work+0x1a8 e1000g`e1000g_intr+0x3c unix`av_dispatch_autovect+0x78 unix`intr_thread+0x50 2 842 ipcl_tcpconn_cache:udpInCksumErrs ip`ip_input+0x729 dls`i_dls_link_ether_rx+0x153 mac`mac_rx+0x46 e1000g`e1000g_intr_work+0x1a8 e1000g`e1000g_intr+0x3c unix`av_dispatch_autovect+0x78 unix`int...

...ance), it didn''t get better. Today I tried with netcat (and mbuffer) and I got better throughput, but it failed at 269GB transferred. The two machines are connected to the switch with 2x1GbE (Intel) joined together with LACP. The switch logs show no errors on the ports. kstat -p | grep e1000g shows one recv error on the sending side. I can''t find anything in the logs which could give me a clue about what''s happening. I''m running build 131. If anyone has the slightest clue of where I could look or what I could do to pinpoint/solve the problem, I''d b...

I''m testing an Iscsi multipath configuration on a T2000 with two disk devices provided by a Netapp filer. Both the T2000 and the Netapp have two ethernet interfaces for Iscsi, going to separate switches on separate private networks. The scsi_vhci devices look like this in `format'': 1. c4t60A98000433469764E4A413571444B63d0 <NETAPP-LUN-0.2-50.00GB>

...unix: [ID 469452 kern.notice] NOTICE: adp: 64-bit driver module not found Apr 27 09:30:04 weston unix: [ID 469452 kern.notice] NOTICE: mscsi: 64-bit drive r module not found Apr 27 09:30:04 weston unix: [ID 469452 kern.notice] NOTICE: i2o_scsi: 64-bit dr iver module not found Apr 27 09:30:04 weston e1000g: [ID 801593 kern.notice] NOTICE: pciex8086,1096 - e1000g[0] : Adapter 1000Mbps full duplex copper link is up. Apr 27 09:30:04 weston scsi: [ID 193665 kern.notice] sd0 at ata0: target 1 lun 0 Apr 27 09:30:04 weston genunix: [ID 936769 kern.notice] sd0 is /pci at 0,0/pci-ide@ 1f,1/ide at 0/sd at 1,0...

I just BFU''ed up to B61 and started to play with IP Instances. I''m having trouble making my zone happy: root at aeon zones$ zoneadm -z testing1 boot zoneadm: zone ''testing1'': WARNING: unable to hold network interface ''skge0''.: Invalid argument root at aeon zones$ dladm show-dev nge0 link: up speed: 100Mb duplex: full

...cipate in the project''s third and last phase of code review. The third phase of the review starts today, and will last for two weeks. It covers the following parts of the code: VLANs Link Aggregations Xen mac_datapath_setup All drivers (excluding e1000g) The webrev is available in http://www.opensolaris.org/os/project/crossbow/Code-review3 Interested? please send the code review comments by October 24th, 2008 Thanks, The Crossbow team.

....c usr/src/uts/common/io/dls/dls_mgmt.c usr/src/uts/common/io/dls/dls_mod.c usr/src/uts/common/io/dls/dls_soft_ring.c usr/src/uts/common/io/dls/dls_stat.c usr/src/uts/common/io/dls/dls_vlan.c usr/src/uts/common/io/dmfe/dmfe_impl.h usr/src/uts/common/io/dmfe/dmfe_main.c usr/src/uts/common/io/e1000g/e1000g_main.c usr/src/uts/common/io/e1000g/e1000g_rx.c usr/src/uts/common/io/e1000g/e1000g_stat.c usr/src/uts/common/io/e1000g/e1000g_sw.h usr/src/uts/common/io/e1000g/e1000g_tx.c usr/src/uts/common/io/fd.c usr/src/uts/common/io/fdc.c usr/src/uts/common/io/hxge/hxge.h usr/src/uts/common/io/...

Hi All, I have a machine with three network cards, and the third card(named e1000g2) is in use now. I want to use e1000g2 as default NIC when I create Guest. How can I change the default NIC? I can override the default value of config/default-nic property of svc:/system/xvm/xend. But xend still use e1000g0 when creating Guest. BTW, I can explicitly set "bridge=e1000g2&quot...

Folks, I''m playing with maxbw on links (as opposed to flows) in Crossbow, and I have a couple of questions. First, the limts seem only advisory. The first example has the main host talking to a zone that has 172.16.17.100 configured on znic0. When there is no maxbw, the throughtput is as expected; when maxbw is 55M the throughput only drops to 76 Mbps: # netperf -H

I am sharing out ZFS ISCSI luns to my Mac. When copying large files, the network will hang in the middle of the transfer and the LUN will become unavailable until I plumb the NIC. This issue appears to only occur only when I am reading files (ie..syncing an ipod) and not writing (I''m not 100% sure though). When I snoop the interface I notice a bunch of ARP lookups. Any ideas? Thanks in

Does facter support NICs that are not named ethX? I happen to use custom names on my systems. Just a quick look at the code I don''t see why it wouldn''t but the behavior I am seeing is very different. -- You received this message because you are subscribed to the Google Groups "Puppet Users" group. To post to this group, send email to puppet-users@googlegroups.com. To

I posted a thread here... http://forums.opensolaris.com/thread.jspa?threadID=596 I am trying to finish building a system and I kind of need to pick working NIC and onboard SATA chipsets (video is not a big deal - I can get a silent PCIe card for that, I already know one which works great) I need 8 onboard SATA. I would prefer Intel CPU. At least one gigabit port. That''s about it. I

Hi. After running with the crossbow bits for a while, I discovered that the network management port on my T1000 wasn''t working properly (no link light). When logging in on the serial management port and running "resetsc", I got this: --->8--- ALOM POST 1.0 Dual Port Memory Test, PASSED. TTY External - Internal Loopback Test TTY External - Internal Loopback Test, PASSED.

Howdy, I just installed the crossbow snapshot from opensolaris.org, and bumped into an issue when attempting to create a virtual nic: $ dladm create-vnic -i 192.168.1.101 -d ni0 2 dladm: VNIC creation failed: No such file or directory (unknown diagnostic) When I truss the process, it looks like it''s failing when attempting to open the vnic pseudo-device: 100878/1:

got a problem with b75 that the zone with ip-exclusive just takes the identity of the global zone. For the primary nic there is no option to set its ip and hostname. When i change the host name and ip the hostname does not change and the networking goes weird for both the zone and global zone. sparc eri qfe There any bugs about or should this work fine? This message posted from