search for: dvdroms

Hello @all, I cannot add my two dvdrom-drives under wine ! I tried it under wincfg, nothing goes. Any tips or hints ??? Wine: 1.3.6 Ubuntu: 10.10 Dvd-Rom & Dvd-writer: both SATA.

hi i am a complete newbie to xen, and i have still a problem with hda(hdc): lost interrupt coming from the 2.6.10-xen0 kernel on an asrock k7s8x board with an additional promise 100 controller(doesn''t get recognized anyway) an amd athlon 2400+ and 512 mb ram. an ideas? regards toby ------------------------------------------------------- SF email is sponsored by - The IT Product

Hi all, Here's my story. I have 3 hosts, 1 remote and 2 local. We'll say for the sake of clarity that h1 is remote and h2 is the local rsync pull host and h3 is also a local host on the net. Using rsync, I want to pull a data set first from h1 to both h2 and h3. The first pull copies all the data from h1 to h2 and h3. OK, that gives me a baseline of the data on both h2 and h3.

Hi, I made this simple path to make sftp-server restricted to a basepath! This was done because use sshfs [wich base is sftp-server] to allow people access medias [ cdrom,dvdrom, floppy, usb] from x-terms. Those x-terms [ diskless] does not have all users, so we share a single user and a DSA empty passphrase, with some acl scipts at .ssh/authorized keys. Main usage of this patch is to NOT

Hello, I was testing Fedora 16 (rc2) Xen host, with included Xen 4.1.1 rpms and Linux 3.1.0 dom0 kernel. Fedora 16 PV domUs seem to work nicely. I noticed a problem with Fedora 16 Xen HVM guests though. The F16 guest kernel (Linux 3.1.0) fails with the qemu-dm emulated DVD-ROM drive.. Full HVM guest kernel dmesg attached to this email. See the end of this email for Xen cfgfile for the

Hello, I try to install dvdshrink on debian with wine, but after I confirm the install, I have this: Access violation at address B7EEBCEF. Wrote of address 75890000 This is my config file. Thanks. PS : I modify it to put windows versin on "winxp". ----------------------------------------------------------------------------------------------------------------- ;;

All of these are negotiable in doing. I would like you alls opinions on these topics. I suspect links to them can be put here: "http://wiki.centos.org/HowTos/". In the correct section. What do you all think the biggest concern with new users are? I've had a few comments so far from about 3 people. I would like some more ideas on the subject. http://wiki.centos.org/HowTos

Hi folks - I have the XCP Xen Cloud iso version .5 and am trying to us this as a boot cd an AMD opteron 8354 based server. The boot CD seems to be stuck at "ISOLINUX 3.53 0x4c2b0b05 Copyright etc.." I have compared the md5 sum of the downloaded ISO to the one on the site and they match, I have also tried 3 different CD''s. Unfortunately I do not have another server to try.

Hi All, My question is: Is it possible to make a DVD-R/DVD+R with a boot menu so that you could select a particular bootable ISO on the DVD, and boot into that distro? Asked another way, is it possible to boot an ISO burned as an ISO9660 file on CD or DVD media? If it is, how can this be accomplished? TIA, Andrew.

Hi, I'm trying to install 5.1 using the onboard LSI Symbios 53C1010, and I'm running into some trouble. When the computer first boots, the SCSI BIOS sees the three HDDs, but when I go to install, the installer hangs for a while at inserting the sym53c8xx driver and if I go over to the screen on F4 it shows that it is trying to scan the SCSI bus and is resetting all of the IDs. Once that

Hi all, I have successfully got Xen virtualisation configured with CentOS 4 (64bit). However now that I am using the Xen Kernel my Dom0 doesn't seem to see the DVDROM device. Is this intentional in the kernel? Is there anything (apart from compiling my own kernel) that will enable the Dom0 to see the DVD-ROM device? Thanks -- "I never look back darling, it distracts from the

I am a Fedora 13 user, so HAL automounts CDROMs and DVDROMs on /media/<LABEL> (this node is also dynamically created and removed from the /media/ directory as needed). II would like to assign a device drive letter to /dev/sr0 to reference any CD or DVD when inserted (e.g. d:: --> /dev/sr0), instead of having to manually create a symlink to the dyn...

Can someone please help me with writing a udev rule? I need /dev/ttyUSB0 to automatically have 777 rights when plugged in. I'd like it to only apply to that one specific device. I'm not sure where to start, what files to look at and also what to write to make it work. TIA Brad This e-mail transmission contains information that is confidential and may be privileged. It is intended only

I am trying to install CentOS 6 x86_64 on a Lenovo Thinkpad x220. During the installation it asks me to insert a driver. Has anyone done this successfully? -- Rgds, Janne Nyman M: +44 751 696 1842 E: jnyman at jbtec.org

hi all, i just inherit a server: Compaq ProLiant ML370 Generation 2 Server with Smart Array 5300 Controller with 6x18.2GB hard drives. i want to install centos 5 on it with hardware raid 1. any idea how? it also has a build-in and add-on ethernet cards. how do i know which one is which to assign ip? thanks. t. hiep

Hello All, We have some machines running CentOS 4 Update 4 (4.4). We want to update these boxes to the stock CentOS 4 Update 8 (4.8). We have the 4.8 iso images. Is it possible to use up2date and have it use the 4.8 mounted iso images on a remote (install) server as the repository? The ISO's are accessible through http. These servers are remote with no CD/DVD option to upgrade that way. I have

On reboot, one out of 10 times, reboot (from hardware initialization) stops. Referring to this portion of the dmesg -v output, of a successful boot, where i have marked ">>>HERE<<<" is where the boot freezes on an unsuccessful boot. This is a constnat problem, on 6.2 as well as 6.3 unchanged. ata0-master: pio=PIO4 wdma=WDMA2 udma=UDMA33 cable=40 wire acd0: setting

Hello, I'm looking for test users for new iSCSI target software designed for multipath failover cluster nodes. I'm very interested in the virtual machine such as Hyper-V. So I'm also tuning the target for using VMs. I need an environmental report in particular other than FreeBSD 7.1 RELEASE p3 i386/PAE kernel w/ZFS. I welcome the report with other initiators below. If you are

I'm running: localhost(6.1-P)[21] uname -a FreeBSD localhost 6.1-PRERELEASE FreeBSD 6.1-PRERELEASE #19: Wed Mar 15 07:15:25 PST 2006 root@g1-18.catwhisker.org.:/common/S2/obj/usr/src/sys/LAPTOP_30W i386 localhost(6.1-P)[22] I figured I'd grab a copy of the recent 6.1-BETA4 (disc1) ISO to try it out & hand it out to folks.... It seems to have worked, but I got a bit of a whine

These are new boxes. http://www.supermicro.com/products/system/1U/5015/SYS-5015B-MT.cfm core 2 Q6600 CPU 8Gb 667 RAM Boxes were memtested from Fri-Mon okay. 6.3-RELEASE (amd64) installs fine. Build cycle okay. Running (no load) for a week or so. However, when I try to configure gmirror they hang on boot. After some fiddling it appears issuing #kldload geom_mirror hangs the boxes very hard.