search for: do_notifi

Hello NUT Team! I continue playing with NUT for Windows and USBHID-UPS driver I've got from Frederic to fix "Data Stale" problem. It seems there is something wrong when Network UPS Tools service is starting with disconnected USB cable. UPSMON is writing "Data Stale" to output and continue do it infinitely, even the cable is connected back. Here is a short log: Network

From f244bcad756c4f761627557bb7f315b1d8f22fb2 Mon Sep 17 00:00:00 2001 From: Dor Laor <dor.laor@qumranet.com> Date: Thu, 20 Dec 2007 13:26:30 +0200 Subject: [PATCH] [VIRTIO-NET] Rx performance improvement The current performance are not good enough, the problem lies in qemu tap handling code that caused to pass packets one at a time and also to copy them to a temporal buffer. This patch

From f244bcad756c4f761627557bb7f315b1d8f22fb2 Mon Sep 17 00:00:00 2001 From: Dor Laor <dor.laor@qumranet.com> Date: Thu, 20 Dec 2007 13:26:30 +0200 Subject: [PATCH] [VIRTIO-NET] Rx performance improvement The current performance are not good enough, the problem lies in qemu tap handling code that caused to pass packets one at a time and also to copy them to a temporal buffer. This patch

I have a Raspberry PI that I have connected to a Deltec UPS via serial (upscode2 driver). I had an older version of Rasbian running. The nut configuration worked fine but I had mail issues I couldn't resolve when gmail changed how it handled MTAs. Plus it was running an old version of Deb that is no longer supported. It was broken enough I could not upgrade to a never version so I started from

Hello First things first, thanks for great work with NUT. For years I used Informer compact 3kVA UPS http://www.informups.com/informer_compact.html with nut/megatec serial driver, but it stopped working when I switched to blazer_ser with 2.6.0 upgrade. I'm using 2.6.0 on gentoo. Blazer_ser seems to connect with UPS, but upsmon reports driver not connected. uname -a Linux localhost

?Hello, There is a new intermediate Windows binaries release available at : http://www.networkupstools.org/package/windows/NUT-Installer-2.6.5-3.msi This fixes a regression about stopping the NUT service. Feedback is highly appreciated. Regards, Fred -- Eaton Opensource Team - http://opensource.eaton.com ----------------------------- -----------------------------

Hello All, I'm trying to establish a MASTER SLAVE configuration of UPS using NUT Driver. I'm able to shutdown the master after UPS is on BATTERY ( POWER BLACKOUT) .However I'm trying to shutdown the other SLAVE MACHINES BEFORE MASTER. But at the remote side ( Slaves ) shutdown after UPS blackout does not happen. My configuration in Master are /usr/etc/upsd.users

Hi, I feel that i'm having a small problem with my upsmon configuration (maybe even simply a permissions problem) since I upgrade today to 2.0.2 I have apcsmart set up and talk to my ups no problem (upsc get answer). I have upsd running no problem! But when I try to start upsmon, it's unable to talk to my upsd. Having try a few option I found that saying RUN_AS_USER=root makes my upsmon

Hi, I have UPS Socomec ITYS 3000 with Netvision card. OS is Centos 6.5 64-bit. NUT installed with yum,. nut-2.6.5-2.el6.x86_64 nut-client-2.6.5-2.el6.x86_64 Why is ups.status empty? Here is upsc output: upsc myups at localhost battery.charge: 97.00 battery.runtime: -60.00 battery.voltage: -0.10 device.mfr: Net Vision v6.01 (SN 0101414290) device.model: ITYS 3 kVA device.serial: 3I14450043

Hi all, After client's certificate verifications discussion in the mailing-list, I have done some tests with nut trunk and - if my config is not too bad - I think ther is a bug with server certificate verification. With a clean trunk checkout, compile and installation; and with the following config : upsmon.conf: CERTPATH /usr/local/ups/etc/cert/ CERTVERIFY 1 FORCESSL 1 Upsd.conf: CERTFILE

Hello, I am currently working on the nut scanner. For detecting available upsd on the network, I rely on upscli_connect. The problem with this function is that it calls a blocking "connect" function. So the nut-scanner is blocked while waiting for the TCP timeout when trying to connect to an IP without upsd available . Since this timeout may be rather long (3 minutes on my host), I

Hello list members, I am running NUT 2.0.1 on an OpenBSD 3.8 system, using the OpenBSD port for net-snmp-5.1.2p2. The UPS is connected via an AP9606 Web/SNMP card with current firmware, and the LAN. All goes well for a long time, usually more than one month. Then the system starts spitting messages about losing communications with the UPS. A second message about reconnecting follows immediately.

Hello! I tried NUT 2.6.5-1 (Windows port) with my APC Back UPS ES. It seems I have configured NUT properly, nut-scanner found my UPS: [nutdev1] driver = "usbhid-ups" port = "auto" vendorid = "051D" productid = "0002" product = "Back-UPS ES 525 FW:851.t3.I USB FW:t3" serial = "8B0745R23575

I've installed 2.8.1 on a Raspberry PI 5 using Pi OS bookworm 64 bit (Debian 12) with success. When I take that same configuration to a PI 3B running bookworm 32 bit, compile from source, use the same files from /etc/nut, I get a 'nut-monitor ups at localhost Connection refused. usbhid-ups and dummy-ups are running at the time. What should I be looking for? Dan -------------- next

I need some help here with getting this thing running. Every time I enable NUT on the server, I get a "on battery" status when I know that it is running on house power. This only occurs when I am monitoring it with FreeBSD(NAS4Free) When i plug the same UPS into CentOS 6.7, It works as expected. I am not sure what the difference between the NUT versions other than the base OS would be.

>> >> I need some help here with getting this thing running. Every time I enable NUT on the server, I get a "on battery" status when I know that it is running on house power. This only occurs when I am monitoring it with FreeBSD(NAS4Free) > >Which version of FreeBSD is this based on? I also included the Motherboard and processor so if there is anything those

Here is patch 1 of 2. Roger diff -rup nut-2.7.4.orig/clients/upsmon.c nut-2.7.4.dev/clients/upsmon.c --- nut-2.7.4.orig/clients/upsmon.c 2015-12-29 13:08:34.000000000 +0100 +++ nut-2.7.4.dev/clients/upsmon.c 2016-07-01 09:46:21.567766415 +0200 @@ -525,6 +525,18 @@ static int get_var(utype_t *ups, const c numq = 2; } + /* Subcommands for polling SIGUSR1, SIGUSR2 RP */ + if (strcmp(var,

Hello We have an Socomec Sicon Netys PR3000 UPS equipped with NetVision Web/SNMP adaptor. I try to monitor the ups using snmp-ups driver and netvision mibs set. The snmp-ups driver starts correctly and connects to the UPS, upsd confirms it, but upsmon constantly shows "No communication" error I think the cause is the SNMP adapter reports the UPS status as "ECO mode"

Hi there, I'm trying to track down a problem with said combination. Broadcast message from nut (Thu Jan 26 13:22:06 2006): Communications with UPS UPS@localhost lost Broadcast message from nut (Thu Jan 26 13:22:11 2006): UPS UPS@localhost is unavailable "newhidups -DDD hiddev0" seems happy enough, as does "upsd -DDD -f" - at least until I start upsmon. Then I