search for: dlink

Hi, I have a dlink dvg-1120M (mgcp) box that i will like to use with asterisk. Is it possible? has anyone done that? Here's a link to the product page at dlink. http://support.dlink.com/products/view.asp?productid=DVG%2D1120M Also, does anyone has or know where to get the firmware for Dlink DVG-1120S (s...

Does anyone know if this unit works with Asterisk? Thx. B.

For those of you that have dlink VoIP hardware, I thought I'd post this link. It's a whole lot easier that navigating their support site trying to find anything. There is updated firmware for most of their products. ftp://ftp.dlink.com/VoIP/ A word of warning about the DG_104S firmware. It's better than the firmwa...

Hello, I try to place a call between CISCO IP phone 7905 (h323) and an analogue telephone on DLINK DG-104S (mgcp). Call setup is handled ok - both way, but after connection of the call I get both site no-audio, even codec are Set to alow-64 both. The call is terminated with this debug output - Didn't get a frame from channel: MGCP/aaln/1@dlink-1 and is Hanged up. Jan 18 20:32:55 NOTICE[11...

Anyone know how to set up port forwarding of multiple ports on a DLink DI-604? I successfully portforward the SIP port on the Advanced|Virtual Server page. It works because I can register a SIP client, but it's a single port - 5060. The DLink doesn't seem to provide an obvious way of portfarding the 10000 - 20000 ports needed for RTP. Any ideas? Hugh

I had just found a Dlink DVG-1120 on ebay and I'm curious if anyone has used you it with asterisk. They were only $65. I have tested with the Linksys Pap2 and found that box to be fairly nice except for a lot of backgound/white noise. I was wondering if any else had experienced that? Let me know if I've wasted...

Well i did it, i finally broke down and bought a hardware based media player, the dlink dsm 320. Not only can i watch my dvds from my pc, but listen to my 30+gb ogg vorbis collection, create a playlist file (.pls format) with shoutcast and icecast2 streams (mp3 only) and crank them through the home theatre system. Just a heads up though, even though it supports shoutcast and icecast...

Hi all, I'm making a small voip network with asterisk and Dlink dg102s gateways (MGCP). Dlink gateways work with g.711, g731 and g729 codecs. The questions: do i need a g729 codec license for asterisk for dlink use g.729 or just configure asterisk to inform gateways to utilize then ? Anyone have a .conf(s) example(s) to send-me ? Thank's Alexandre da...

Hi, I'm playing around with Asterisk and DPH-100M (Dlink mgcp phone) on my debian box. I've got stable version of Asterisk (packaged for debian) working with dlink phone and 7910 from cisco (minimalistic extensions.conf and chan_skinny for 7910) Everything works fine. Now I'm trying to get CVS HEAD working with MGCP. I want to test chan_sccp (h...

Does anyone have any experience using this DLink quad FXO <> SIP gateway with Asterisk? I'm still looking for an analog interface that I can live with, having tried X101p, SPA-3000 and TDM400...all with less than desirable results. Michael -- Michael Graves mgraves@pixelpower.com Sr. Product Specialist...

Sorry for the ignorance. Would I be able to install and run the DLink USB Wi-Fi drivers via Wine?

I have a DG-104S (which I reset to factory settings, it's DHCP'ing off my network, plugged into the WAN port). The system comes up, and I through the web browser set under Call Agent IP Address to: Notify Entry: dlinkgw@[192.168.1.1]:2427 (192.168.1.1 is the * server) I have RGW Name: and DNS IP addres the DNS IP of the MGCP box and DNS State disabled (not sure what to set it to) -- don't have a manual for it... In my mgcp.conf I have: ; ; MGCP Configuration for Asterisk ; [general] port = 2427 bindaddr = 0...

...cial on them and I think Buy.com is doing a 30$ rebate. I gather that it's based on the ZenSonic units which supposedly supports Ogg, but that particular bit of code isn't quite up to speed yet. > Well i did it, i finally broke down and bought a hardware based media > player, the dlink dsm 320. > Not only can i watch my dvds from my pc, but listen to my 30+gb ogg > vorbis collection, > create a playlist file (.pls format) with shoutcast and icecast2 > streams (mp3 only) and crank them > through the home theatre system. > Just a heads up though, even though it...

After 20 cups of strong coffee and wasteing most of tonight and obviously doing lots of googling and emailing many people, i've concluded that dlink voip phones specifically DPH-80 dosent work with asterisk. If anyone has had anymore luck with these phones then me please let me know -- regards Vikram

Hi, I am thinking of purchasing a cheap Dlink VPN for testing purposes for use with my Asterisk box and would like to ask the list for advice on how to pick a VPN that will work with my box. I am a newbie to both VPN's and Asterisk so any advice will be appreciated. Thanks, Mike -------------- next part -------------- An HTML attachment...

I have seen this product before and wondered, has anyone connected this to Asterisk? http://www.i-2-eye.com/index.html As far as that goes has anyone seen a set top box video phones that work with Asterisk? -- Bruce Reeves Nortex Networks -------------- next part -------------- An HTML attachment was scrubbed... URL:

Thank all for fast help in my question. Anybody use DLINK 570 TX with 4 ports ? It was developed to NT, Does it work with Linux? Thanks Gilberto Braz

...hone is on an internal lan with a local aah server. I'm merely guessing but it seems like the rtp side is not communicating properly. The codec selected is ulaw as in the config, I changed what they call "media" port from 41000 to 10000, to no avail. Does anyone have a fully working dlink phone with aah, or particularly this model? It seems very close to working. The puzzing thing to me is you can never hear any audio (tones are ok), and the audio is heard in a vm message. The phone is pretty decent otherwise so any tips would be appreciated. Thanks, Dale

Hello, I've successfully installed Asterisk from last CVS and configured it for using with DLINK-DG104S as mgcp CPE and PGW2200 as external sip server. All are work fine at G711 codecs, but then I disable all codecs except g729 some calls failed (Not all calls. Some calls passed at g729 succesfully). All my devices configred to use only g729 and I don't see other codecs at mgcp or sip me...

...all the above tests using files larger than 1 GB to get a sustainable speed. I also did tests using 1MB files and performance was similar. Thanks guys! Any help is appreciated. -- View this message in context: http://www.nabble.com/Performance-tweaking-from-Ubuntu-to-a-Macbook-vs.-Windows-through-DLink-DIR-655-tp19826605p19826605.html Sent from the Samba - General mailing list archive at Nabble.com.