Displaying 18 results from an estimated 18 matches for "dlci".
Did you mean:
dci
2003 May 05
1
FW: HDLC & T100P
I got it figured out now. In case anyone else comes across it - this is what I had to do:
Sethdlc hdlc0 mode ansi
Ifconfig hdlc0 up ***NO IP INFO SET***
Sethdlc hdlc0 create <dlci number>
Ifconfig pvc0 <local ip> pointopoint <remote ip> up
Then set your default gateway to the <remote ip> listed in pvc0. That's about it!!
Hope it helps!
-----Original Message-----
From: DUSTIN WILDES
Sent: Monday, May 05, 2003 11:02 AM
To: 'asterisk-users@...
2004 May 21
5
T100P HDLC configuration
...it 1"
interface t1 1 pvc 1 vpi 0
interface t1 1 pvc 1 vci 35
interface t1 1 pvc 1 cp default
interface t1 1 pvc 1 voice no
interface t1 1 pvc 1 pcr 0
interface t1 1 prm-enable no
interface t1 1 rfc1973 enable no
interface t1 1 rfc1973 dlci 16
interface t1 1 rfc1973 lmi none
interface t1 1 cell-format scrambled
interface t1 1 unused cell-format idle
interface t1 1 ds0-autodetect no
cp 1 yes
cp 1 tag 36.HCGA.101976.VA
cp 1 enable yes
cp 1 dle hdlc
cp 1 ip enable yes
cp 1 ip addres...
2003 May 05
0
HDLC & T100P
.../etc/zaptel.conf:
Fxsks=1-10
Nethdlc=11-24
Modprobe wct1xxp works fine and my voice lines work.
Now when I use the provided sethdlc, I use the following commands:
Sethdlc hdlc0 mode ansi
Ifconfig hdlc0 <ipaddress> <network> <network> <ip network> up
Sethdlc create 101
My DLCI is 101 - what do I need to do to bring up my DLCI interface?
Thanks!!!
2004 Aug 31
1
T100P Configuration for Mixed Voice & Data
...= 24
alignment = same
(The following is what our Vina T1 Integrator currently has in its
settings. Our Linux box will replace the Vina)
Synchronous Interface:
encapsulation = Frame-Relay
HDLC-inversion = off
Encap-data:
LMI-Type = T1.617-annex-D
N391 = 6
N392 = 3
N393 = 3
T391 = 6
PVC1 :
DLCI = 100
IP = ---.---.---.---
netmask = 255.255.255.252
RIP = disabled
NAT = OUT
Thank you for the help ahead of time!
--Shawn
2009 Jun 30
1
wan hdlc_ppp and IPv6
Hi list,
I can successfully build the driver modules; hdlc, dlci, syncppp, and lmc
from the 2.6.18-128.1.14 kernel source rpm, and have managed to
create a 'wan kmod' rpm. It all works fine for IPv4, but now I need
IPv6 for ppp connections, which doesn't work for me.
I think I'll need to back port Krzysztof Halasa's 'ppp for generic...
2012 Feb 15
2
[PATCH v2 0/2] Part 2: handle addr_assign_type for random addresses
The second part of my patch series to fix the handling of
addr_assign_type for random MAC addresses. This contains the
trival changes from random_ether_addr() to new
eth_hw_addr_random() and code to reset the state to
NET_ADDR_PERM as soon as the MAC get changed via
.ndo_set_mac_address where eth_mac_addr wasn't used.
Danny Kukawka (2):
net: replace random_ether_addr() with
2012 Feb 15
2
[PATCH v2 0/2] Part 2: handle addr_assign_type for random addresses
The second part of my patch series to fix the handling of
addr_assign_type for random MAC addresses. This contains the
trival changes from random_ether_addr() to new
eth_hw_addr_random() and code to reset the state to
NET_ADDR_PERM as soon as the MAC get changed via
.ndo_set_mac_address where eth_mac_addr wasn't used.
Danny Kukawka (2):
net: replace random_ether_addr() with
2012 Feb 15
2
[PATCH v2 0/2] Part 2: handle addr_assign_type for random addresses
The second part of my patch series to fix the handling of
addr_assign_type for random MAC addresses. This contains the
trival changes from random_ether_addr() to new
eth_hw_addr_random() and code to reset the state to
NET_ADDR_PERM as soon as the MAC get changed via
.ndo_set_mac_address where eth_mac_addr wasn't used.
Danny Kukawka (2):
net: replace random_ether_addr() with
2012 Feb 15
4
[RESEND][PATCH v2 0/2] Part 2: handle addr_assign_type for random addresses
The second part of my patch series to fix the handling of
addr_assign_type for random MAC addresses. This contains the
trival changes from random_ether_addr() to new
eth_hw_addr_random() and code to reset the state to
NET_ADDR_PERM as soon as the MAC get changed via
.ndo_set_mac_address where eth_mac_addr wasn't used.
Resend due to send with too long recipients list. Sorry!
Thanks to Joe
2012 Feb 15
4
[RESEND][PATCH v2 0/2] Part 2: handle addr_assign_type for random addresses
The second part of my patch series to fix the handling of
addr_assign_type for random MAC addresses. This contains the
trival changes from random_ether_addr() to new
eth_hw_addr_random() and code to reset the state to
NET_ADDR_PERM as soon as the MAC get changed via
.ndo_set_mac_address where eth_mac_addr wasn't used.
Resend due to send with too long recipients list. Sorry!
Thanks to Joe
2012 Feb 15
4
[RESEND][PATCH v2 0/2] Part 2: handle addr_assign_type for random addresses
The second part of my patch series to fix the handling of
addr_assign_type for random MAC addresses. This contains the
trival changes from random_ether_addr() to new
eth_hw_addr_random() and code to reset the state to
NET_ADDR_PERM as soon as the MAC get changed via
.ndo_set_mac_address where eth_mac_addr wasn't used.
Resend due to send with too long recipients list. Sorry!
Thanks to Joe
2007 Apr 18
1
[Bridge] Re: hang on PPC
...ng by UNIFIX
> Linux NET4.0 for Linux 2.4
> Based upon Swansea University Computer Society NET3.039
> Initializing RT netlink socket
> Starting kswapd
> CPM UART driver version 0.03
> ttyS00 at 0x0280 is a SMC
> pty: 256 Unix98 ptys configured
> Generic RTC Driver v1.07
> DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org.
> eth0: FEC ENET Version 0.2, FEC irq 9, MII irq 10, addr
> ce:3d:fa:01:00:10
> RAMDISK driver initialized: 16 RAM disks of 8000K size 1024
> blocksize
> loop: loaded (max 8 devices)
> PPP generic driver version 2.4.2
> PPP Defl...
2006 Jun 12
0
ICLID or CNAM calling name and number through a cisco isdn gateway
...tdown
duplex auto
speed auto
!
interface Serial0/0
no ip address
encapsulation frame-relay IETF
no ip mroute-cache
no fair-queue
service-module t1 timeslots 1-24
frame-relay lmi-type ansi
!
interface Serial0/0.1 point-to-point
ip address 66.xxx.xxx.xxx255.255.255.252
frame-relay interface-dlci 100
!
interface Serial1/0:23
no ip address
no logging event link-status
isdn switch-type primary-ni
isdn incoming-voice voice
no isdn outgoing display-ie
no cdp enable
!
ip http server
!
ip classless
ip route 0.0.0.0 0.0.0.0 66.xxx.xxx.xxx
!
!
access-list 52 permit 65.xx.xx.xxx
snmp-server co...
2020 Mar 11
0
[PATCH -next 000/491] treewide: use fallthrough;
...se fallthrough;
ETHERNET PHY LIBRARY: Use fallthrough;
USB LAN78XX ETHERNET DRIVER: Use fallthrough;
USB PEGASUS DRIVER: Use fallthrough;
USB RTL8150 DRIVER: Use fallthrough;
USB "USBNET" DRIVER FRAMEWORK: Use fallthrough;
USB NETWORKING DRIVERS: Use fallthrough;
FRAME RELAY DLCI/FRAD (Sangoma drivers too): Use fallthrough;
MAC80211: Use fallthrough;
RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER: Use fallthrough;
NETWORKING DRIVERS (WIRELESS): Use fallthrough;
XEN NETWORK BACKEND DRIVER: Use fallthrough;
NVM EXPRESS FC TRANSPORT DRIVERS: Use fallthrough;
NVM EXPRES...
2020 Mar 11
0
[PATCH -next 000/491] treewide: use fallthrough;
...se fallthrough;
ETHERNET PHY LIBRARY: Use fallthrough;
USB LAN78XX ETHERNET DRIVER: Use fallthrough;
USB PEGASUS DRIVER: Use fallthrough;
USB RTL8150 DRIVER: Use fallthrough;
USB "USBNET" DRIVER FRAMEWORK: Use fallthrough;
USB NETWORKING DRIVERS: Use fallthrough;
FRAME RELAY DLCI/FRAD (Sangoma drivers too): Use fallthrough;
MAC80211: Use fallthrough;
RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER: Use fallthrough;
NETWORKING DRIVERS (WIRELESS): Use fallthrough;
XEN NETWORK BACKEND DRIVER: Use fallthrough;
NVM EXPRESS FC TRANSPORT DRIVERS: Use fallthrough;
NVM EXPRES...
2020 Mar 11
0
[PATCH -next 000/491] treewide: use fallthrough;
...se fallthrough;
ETHERNET PHY LIBRARY: Use fallthrough;
USB LAN78XX ETHERNET DRIVER: Use fallthrough;
USB PEGASUS DRIVER: Use fallthrough;
USB RTL8150 DRIVER: Use fallthrough;
USB "USBNET" DRIVER FRAMEWORK: Use fallthrough;
USB NETWORKING DRIVERS: Use fallthrough;
FRAME RELAY DLCI/FRAD (Sangoma drivers too): Use fallthrough;
MAC80211: Use fallthrough;
RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER: Use fallthrough;
NETWORKING DRIVERS (WIRELESS): Use fallthrough;
XEN NETWORK BACKEND DRIVER: Use fallthrough;
NVM EXPRESS FC TRANSPORT DRIVERS: Use fallthrough;
NVM EXPRES...
2020 Mar 11
0
[PATCH -next 000/491] treewide: use fallthrough;
...se fallthrough;
ETHERNET PHY LIBRARY: Use fallthrough;
USB LAN78XX ETHERNET DRIVER: Use fallthrough;
USB PEGASUS DRIVER: Use fallthrough;
USB RTL8150 DRIVER: Use fallthrough;
USB "USBNET" DRIVER FRAMEWORK: Use fallthrough;
USB NETWORKING DRIVERS: Use fallthrough;
FRAME RELAY DLCI/FRAD (Sangoma drivers too): Use fallthrough;
MAC80211: Use fallthrough;
RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER: Use fallthrough;
NETWORKING DRIVERS (WIRELESS): Use fallthrough;
XEN NETWORK BACKEND DRIVER: Use fallthrough;
NVM EXPRESS FC TRANSPORT DRIVERS: Use fallthrough;
NVM EXPRES...
2020 Mar 11
0
[PATCH -next 000/491] treewide: use fallthrough;
...se fallthrough;
ETHERNET PHY LIBRARY: Use fallthrough;
USB LAN78XX ETHERNET DRIVER: Use fallthrough;
USB PEGASUS DRIVER: Use fallthrough;
USB RTL8150 DRIVER: Use fallthrough;
USB "USBNET" DRIVER FRAMEWORK: Use fallthrough;
USB NETWORKING DRIVERS: Use fallthrough;
FRAME RELAY DLCI/FRAD (Sangoma drivers too): Use fallthrough;
MAC80211: Use fallthrough;
RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER: Use fallthrough;
NETWORKING DRIVERS (WIRELESS): Use fallthrough;
XEN NETWORK BACKEND DRIVER: Use fallthrough;
NVM EXPRESS FC TRANSPORT DRIVERS: Use fallthrough;
NVM EXPRES...