I got it figured out now. In case anyone else comes across it - this is what I had to do: Sethdlc hdlc0 mode ansi Ifconfig hdlc0 up ***NO IP INFO SET*** Sethdlc hdlc0 create <dlci number> Ifconfig pvc0 <local ip> pointopoint <remote ip> up Then set your default gateway to the <remote ip> listed in pvc0. That's about it!! Hope it helps! -----Original Message----- From: DUSTIN WILDES Sent: Monday, May 05, 2003 11:02 AM To: 'asterisk-users@lists.digium.com' Subject: HDLC & T100P I'm setting up a T1 for both voice and data and was wanting to know the steps involved. I've recompiled zaptel for ZAPATA_NET support and setup my /etc/zaptel.conf: Fxsks=1-10 Nethdlc=11-24 Modprobe wct1xxp works fine and my voice lines work. Now when I use the provided sethdlc, I use the following commands: Sethdlc hdlc0 mode ansi Ifconfig hdlc0 <ipaddress> <network> <network> <ip network> up Sethdlc create 101 My DLCI is 101 - what do I need to do to bring up my DLCI interface? Thanks!!!
Cristian Rodriguez
2003-May-05 11:42 UTC
[Asterisk-Users] Dialogic board support / * clients
Hi, I am trying to setup an * box and my buddy voluntered the following gear d160sl-8ls does this board work ok with askerisk? He is also giving me a s1/itxc anyone ever hear of such a beast? and will it work on my * box? I am also trying to do the following: call comes into to my * box... Call is sent to next available phone... A screen pop happens on the agents PC and display caller info. Is there some sort of client already outhere that will do this on a windows platform? What would be the best way to handle a screen pop with *. Thank you all very much for your help. Cris