search for: dl145

Hi , I am facing a strange problem .I am unable to install CentOS 4.0 on my HP DL145 G2 Server .I am getting the following error RAMDISK: couldn't find valid RAM disk image starting at 0. Please append correct "root=" boot option VFS: cannot open root device "<NULL>" or unknown-block (3,3) Kernal panic - not syncing VFS unable to mount root fs howev...

On 4/8/06, Dmitry Morozovsky <marck@rinet.ru> wrote: > On Fri, 7 Apr 2006, Mars G. Miro wrote: > > MGM> Greetz! > MGM> > MGM> I have an HP DL145 that I'm having problems with when connecting via > MGM> serial console. I think it's acpi-related. This is on 6.1-BETA4/amd64 > MGM> (5.X is the same also) > > [snip] > > It seems it's DL145 G2. We use three of them and did not see your problem. Yes it's a...

Hi, With help from Oleg we got the right patches applied and NFS working well. Maximum performance was about 60 MB/sec. Last week that dropped to about 12.5 MB/sec and I cannot find a reason. Lustre clients all obtain 100+ MB/sec on GigE. Each OST is good for 270 MB/sec. When mounting the client on one of the OSSs I get 230 MB/sec. Seems the speed is there. How can NFS and Lustre be tuned

I have a task to set this up, but don't have access to it until I finally I am needed to do it. If anyone is familiar with this server, do you know if the motherboard based raid is software based (I can't find any real pointer at hp's site)? If so, I suppose it would be better to install CentOS and setup raid inside of Linux. Given that I have never used anything but hardware raid,

An embedded message was scrubbed... From: unknown sender Subject: no subject Date: no date Size: 3770 Url: http://lists.freebsd.org/pipermail/freebsd-stable/attachments/20060324/87dc309a/attachment.eml

Hi all, I have two HP DL145 G1 machines, running centos4 (2.6.9-22.0.2.ELsmp). Nics are recognized as: eth0: Tigon3 [partno(BCM95704) rev 2002 PHY(5704)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:00:1a:19:f1:05 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap [1] eth1: Tigon3 [partno(BCM95...

...gh that might be being a little too optomistic. It''s been a long time since I''ve specced out a brand new server, and feel a little out of touch choosing this new hardware :) So far I''m thinking of either a higher specced Sunfire 2100 a lower specced Sunfire 4100 or an HP DL145 But I''m still willing to consider other options if recommended. Any input at all will be most welcome... -- Cheers Anton _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

I''ve got a DL145g3 which is reporting svm support in /proc/cpuinfo: processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 65 model name : Dual-Core AMD Opteron(tm) Processor 2214 HE stepping : 2 cpu MHz : 2200.000 cache size : 1024 KB physical id : 0...

Hi, We''ve been using xen with pc clones for some time now. But now the boss wants to get serious and start using real servers. We''ve been looking at HP. I got in touch with a couple of distributors for prices and much to my suprise, I''ve been told by one HP Partner that Xen does not run on HP hardware. (a ProLiant ML 150) He continued to tell me that he could offer me

...#39;m having some fairly serious asterisk problems, which seem to be spread quite liberally across all asterisk versions, I've tried 1.4.2, 1.6.0.10, 1.6.2beta4 and still had exactly the same problem with static and echo on the line when using the PRI interface. A little background: Server: HP DL145 G3 Dual Opteron 246 with 2GB ram and a brand new OpenVox D110P http://www.voipon.co.uk/openvox-d110p-pci-isdn-pri-card-p-658.html Dual 250GB SATA disks in Software Raid 1 Running Ubuntu 9.04 Jaunty, but I had the same problems on Intrepid and Hardy. Versions: Asterisk: 1.4.2, 1.6.0.10, 1.6.2beta4...

Hello all- I have a Digium TE410P in an HP DL145 G2 dual processor server that generates well over 100,000 interrupts per second (sometimes I?ve counted 160,000+ per second) generally resulting in either the system becoming swamped and unusable or the kernel disabling the IRQ the TE410P is on resulting in the spans on that card being unusable. I...

David, So here are the two patches. Remove all patches that you have and apply these. The first one is straight forward. The second one will hopefully fix the livelock issue you have been encountering. People reviewing the patches should note that the second one is slightly different than the one I posted earlier. It removes the BUG_ON in the if condition where we jump to update_holders. The

...ssues occur if I''m not running Xen, which seems to rule out HW failure. To be clear, the host in question is the hypervisor, and the panics occur regardless of whether VMs are running. Version info: Essentially, it''s a fully up-to-date Ubuntu 12.04 system. HW - HP ProLiant DL145 G2/K85NL (rackmount) Xen - 4.1.2-2ubuntu2.6 LVM: LVM version: 2.02.66(2) (2010-05-20) Library version: 1.02.48 (2010-05-20) Driver version: 4.22.0 SSH: OpenSSH_5.9p1 Debian-5ubuntu1, OpenSSL 1.0.1 14 Mar 2012 Kernel - 3.2.0-39-generic I can provide more info on request....

...#39;m having some fairly serious asterisk problems, which seem to be spread quite liberally across all asterisk versions, I've tried 1.4.2, 1.6.0.10, 1.6.2beta4 and still had exactly the same problem with static and echo on the line when using the PRI interface. A little background: Server: HP DL145 G3 Dual Opteron 246 with 2GB ram and a brand new OpenVox D110P http://www.voipon.co.uk/openvox-d110p-pci-isdn-pri-card-p-658.html Dual 250GB SATA disks in Software Raid 1 Running Ubuntu 9.04 Jaunty, but I had the same problems on Intrepid and Hardy. Versions: Asterisk: 1.4.2, 1.6.0.10, 1.6.2beta4...

Hi. I am trying to setup my firewall in DomU. However, I have got a little problem. My pon dsl-provider exits with following message. Nov 18 09:44:40 alsfw01 pppd[1723]: Plugin rp-pppoe.so loaded. Nov 18 09:44:40 alsfw01 pppd[1723]: Linux kernel does not support PPPoE -- are you running 2.4.x? Nov 18 09:44:40 alsfw01 pppd[1723]: Exit. I am running xen out of the box on Debian Stable. My

...2 socket) and 1207 socket, not the 939/940 socket. Chances are you''re only going to run into those with HP labeled servers. Below is the revision / model translation from HP regarding them.. so you can be sure you''re getting the one you want. The HP translator code: dx5150 & DL145 G1 = Rev E dc5750 & DL145 G2 = Ref F In other words, get the dc5750 , not the dc5150 if you want to run HVM guests. I''m posting this because the HP models are popular, great buys .. and (although I''m sure not intentionally) sort of misleading regarding HVM support. This als...

This patch plugs a race between the downconvert thread and an unlock ast message. Specifically, after the downconvert worker has done its task, the dc thread needs to check whether an unlock ast made the downconvert moot. Reported-by: David Teigland <teigland at redhat.com> Signed-off-by: Sunil Mushran <sunil.mushran at oracle.com> Acked-by: Mark Fasheh <mfasheh at sus.com> ---

Hi, I am using centos4 and am trying to build a source kernel dom0 with xen. I cloned a copy of the xen repository and did the following hg clone http://xenbits.xensource.com/xen-2.0.hg cd xen-2.0.hg/xen make dist cd linux-2.6.11-xen0 make ARCH=xen oldconfig make modules make modules_install make install After which point I get the following error : CC drivers/xen/balloon/balloon.o

Hello Team I have installed the new DL580 and used the new TE420B to add capacity on our ivr. Before I put new E1?s I decided to first move the old e1 from the old system to this new one but it has errors which not only affect the audio quality, but also cause the asterisk to refuse any call after sometime even though the channels seems up and active {seems d-channel fails}.. When processing