Displaying 20 results from an estimated 5416 matches for "dialplan".
2013 May 05
2
My new Polycom 450's can't xfer to 4-digit extension
...s the transfer soft key,
they get dial tone, and start typing the extension, say 1008. But by
the time they get 100 typed in, the phone tries to dial and the
transfer fails. I feel sure that it's a dial plan issue on the phone.
We are running:
PolycomSoundPointIP-SPIP_450-UA/3.3.3.0094
The dialplan section of the sip.cfg provisioning file is:
<dialplan dialplan.1.impossibleMatchHandling="0"
dialplan.1.removeEndOfDial="1" dialplan.1.applyToUserSend="1"
dialplan.1.applyToUserDial="1" dialplan.1.applyToCallListDial="0"
dialplan.1.applyToDi...
2007 Mar 05
4
Polycom Questions
...ht savings time rules written for
this Sunday's big change?
Secondly, if there any way in the config file to tell the phone not to
display the number of missed calls? I don't mind it keeping the missed
calls list, I just don't want that running count.
Lastly, I am trying to get the dialplan to work, but have had no luck so
far. I have tried defining it in the sip.cfg and/or the phone1.cfg, but
have had no luck getting the phone to latch onto the numbers, and
immediately dial. I am running with the 2.0.1 firmware, if that matters.
from sip.cfg:
<dialplan dialplan.impossibleM...
2004 May 06
1
polycom dialplan
I recently had a bear of a time getting a Polycom Soundpoint 500IP up
and registered.. Now that its registered I ran into a problem w/ the
dialplan.
Needing to dial x101 I'd dial 10 - then get a fast buzy.. Also making a
local call - dialing 95551212- would give me a fast busy after the 7th
digit - so 9555121.. Same w/ LD calls...
This dialplan really got me down as I didn't find any docs on this.
Look toward the web based inte...
2009 May 06
3
Polycom Dialplan Digitmaps
...t certain numbers. So, I downloaded the newest
firmware and config templates from Polycom, and attempted to migrate the
settings. Seems I'm missing something from the old configs though, and I
need some help figuring out why these expressions lock up the new phone.
Old Configs
<digitmap
dialplan.digitmap="[2-9]11|[*]xx|891xxx|[1-7]xxx|8[0-46-8]xx|8500|851xxx|9,1[2-9]xxxxxxxxx|9,xxxxxxxT"
dialplan.digitmap.timeOut="3"/>
Template from Polycom
<digitmap
dialplan.digitmap="[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[2-9]xxxT"
dialplan.digitma...
2007 Apr 19
0
CLI Dialplan options...
I have a very strange problem. I have two Asterisk servers running
1.4.2. On the first one I have the following options:
Connected to Asterisk 1.4.2 currently running on pbxoficina (pid = 7057)
Verbosity is at least 3
pbxoficina*CLI> help dialplan
dialplan add extension Add new extension into context
dialplan add ignorepat Add new ignore pattern
dialplan add include Include context in other context
dialplan reload Reload extensions and *only* extensions
dialplan remove extension Remove a specified extension
dialplan...
2004 Sep 01
1
Dynamic dialplan
We intend to use Asterisk with a very large dialplan (with a lot of
functionality for 3000+ users). Each user will be able to change several of
his parameters in the dialplan, so we will be forced to reload the diaplan
constantly. Has anybody else any previous experience with a similar
installation? There are some things that we'd like to kno...
2008 Jan 21
1
Polycom 320 Issue
Hi All,
I'm not sure if this is related directly to asterisk or not but on my
Polycom 320 when I try to dial a number smaller than 4 digits I get an
error on the phone saying "Enter more digits".
The dial plan section is listed below.
<dialplan dialplan.impossibleMatchHandling="0"
dialplan.removeEndOfDial="1">
<digitmap dialplan.digitmap="x.|*x."
dialplan.digitmap.timeOut="3"/>
<routing>
<server dialplan.routing.server.1.address=""
dialplan.routing...
2010 Mar 02
1
dialplan reload: not working with large dialplans
There is a problem that bothered me for a long time:
Since one of the 1.6.0.x patch releases up until 1.6.2.5 a "dialplan reload"
works only once with a bigger dialplan.
If I issue "dialplan reload" again, it won't do anything. After doing so the
cli won't show responses
to any commands anymore.
So if I have to do another change to the dialplan, I have to stop/start
asterisk.
Did anyone encoun...
2010 Jun 25
5
Is there a default dial plan that is not in extention.conf?
Hi,
I have a trivial peace of dialplan for exten 100. I try to change it to _1XX
and the asterisk act according to a different (Default??) dial plan and not
the one I want? Is that possible? Where is the other dialplan sits? In my
extention.conf I can't see something that look like what asterisk is
dialing.
How can I trace\debug my...
2015 May 06
0
Cannot "dialplan reload". Explain module loading
Hi,
I've got a system on which Asterisk 11 was first installed.
Then Asterisk 13 was tentatively installed.
Then I'm trying to re-install Asterisk 11.
Every install was made from Asterisk source.
Now Asterisk 11 seems correctly installed but basic "dialplan reload"
command fails with:
dialplan reload
No such command 'dialplan reload' (type 'core show help dialplan' for other
possible commands)
I'm inclined to erase everything and restart from scratch but I'm seeing
these issues as an opportunity to learn how Asterisk mod...
2018 Oct 08
3
Use AGi Commands without script in Dialplan
On Monday 08 October 2018 at 12:44:43, Yves wrote:
> I am looking for an easy way to execute any AGI Command directly from the
> dialplan without the need to call an external script.
The whole point of AGI is that it calls an external script in order to replace
commands in the dialplan.
Executing an AGI command without an external script doesn't make sense.
Antony.
--
There's a good theatrical performance about puns on...
2007 Sep 11
2
Asterisk 1.4.11, res_features.so, SegFault
Hi All,
I have a really strange issue occuring where if I run "show dialplan" or
"dialplan show" or "dialplan show parkedcalls", then asterisk dumps core.
It only appears to happen with contexts that are created within
res_features. I am able to display all my other dialplans, but, every
time I try to just do a normal "dialplan show" aste...
2018 Jul 28
2
dialplan reload not showing debug info even with debug on (ast 15.5)
I've not needed to do a dialplan reload for a while, so I don't know
exactly which version is stopped working, but on 15.5, I'm not seeing
ANY debug info at any debug level.
So I'm not really sure how to find mistakes in the dialplan. This is
all I get... how do I enable this debug mode to see the previous
behaviour?...
2006 Dec 19
26
Match a Numer - then continue with dialplan
Anyone know if there's a way to match a dialplan extension, execute some code, say set a variable, and then continue with the dialplan?
I want to set a variable when the dialplan flows beyond a certain context. This would be a great feature.
Doug.
2020 Sep 22
2
AMI vs. Dialplan Originate
Hi.
(Asterisk 16.2.1)
I'm using AMI Originate to initiate calls, and I'm passing some additional
data in to the dialplan context using the Variable: parameter. Works fine.
https://wiki.asterisk.org/wiki/display/AST/Asterisk+16+ManagerAction_Originate
Now I need to do the same thing but from another context in my dialplan, so I
was expecting to use the Originate() dialplan command, but how do I pass the
additiona...
2006 May 31
5
Explicit Dialplan Exit
So, I've kind of converted my dialplan from:
exten => custcare,1,GotoIfTime(8:00-17:00|mon-fri|*|*?acd_one_queue,custcare-open,1)
exten => custcare,2,Goto(custcare-closed,1)
exten => custcare-open,1....
exten => custcare-open,99....
exten => custcare-closed,1....
exten => custcare-closed,99....
to:
exten =>...
2020 Apr 27
1
Reload dialplan from bash in strict mode
Hi All,
I hope someone can give me a hint.
We try to reload the asterisk dialplan config using ansible command module.
Using this we just trigger asterisk -rx "dialplan reload"
Now we want ansibe to fail if there is something wrong in the dialplan.
If we put a bad config in extensions.conf dialplan reload prints some
warning in Asterisk console but the command "...
2006 Oct 10
28
How big is *your* dialplan??
Hello!
In my relentless quest for knowledge, I pose this question: who's got
the biggest
dialplans, and how big are these monsters?
What's the biggest dialplan in use right now? If you feel you are a
competitor,
let me know how many contexts/extensions/priorities you are dealing
with. Maybe the
context with the most extensions, the extension with the most priorities
would be interesting......
2007 Jan 01
1
Help needed with Polycom dialplan pattern matching
...extensions beginning with # for features setup. I'm getting the fast busy "can't match it" signal. I want to match #50 for call forwarding, for instance, and #505551212 to set the call forwarding number and turn it on. I have tftp set up and sip.cfg contains the following:
<dialplan dialplan.impossibleMatchHandling="0" dialplan.removeEndOfDial="1">
<digitmap dialplan.digitmap="#xx.T|[2-9]11|0T|011xxx.T|[0-1][2-9]xxxxxxxxx|[2-9]xxxxxxxxx|[2-9]xxxT" dialplan.digitmap.timeOut="3"/>
<routing>
<server dialplan.routing.server...
2008 Dec 15
3
Variables for dial plan
I want to have a arbitary named variable within the client's user details in
sip.conf
[client1]
dialplan=NZ
..........
In extensions.conf (Logic expressed using PHP style)
if ($dialplan == NZ) {
$NAT = 0;
$INT = 00;
};
and in the [outgoing] section
; Australia
exten => _${INT}61[278]NXXXXXX.,1,Set(CDR(UserField)=AUSTRALIA)
exten => _${INT}61[278]NXXXXXX.,n,Dial(SIP/SIP_PROVIDER/0${EXTEN:4:9}...