search for: dialpeers

Hello List. We are having some problems using t.38 together with a Cisco voice router at one of our providers end. We are using the new digium asterisk fax module to generate the fax, and when we use together with our internal Audiocodes Mediant 2000 gateways, we have no issues what so ever, and the faxes go right through. When we send faxes to our other provider, who has cisco hardware

Hi, In our office, we're slowly migrating from a cisco call manager set up to asterisk. Problem is management doesn't want to buy any other hardware ?as they had already invested a lot in cisco. The main cause of this is asterisk's added features like unique FAX number for everyone in the company (which will be the same as phone DID), Voice mail, Auto Answer etc yet we need thousands

I am up to post 5 on my step-by-step but I hit a bit of a snag and so far my searches have failed me, I hope someone can help. (By the way, I added an asterisk index for quick navigation on the blog http://qvlweb.blogspot.com/2009/04/asterisk-pbx-install-index.html.) Here is the snag and I am hoping for a little help from the collective. Inbound I have 2 different numbers. I can call in on both

Hello all, We are looking for some hardware requirements/recommendations to be able to handle a full DS3's worth of TDM -> VoIP traffic. The DS3 would bring 24 calls per T1 x 28 T1s = 672 simultaneous calls. We would then need to convert those calls into G729 SIP VoIP calls to send to our asterisk box over ethernet. Since everything is going in/out of asterisk is 729, and no features

hi All Any body already setup asteriks call routing to Cisco AS5300 with SIP Server ? i need informations sample config for that, or can show how to route docs . thanks Dirgan --------------------------------- Meet your soulmate! Yahoo! Asia presents Meetic - where millions of singles gather -------------- next part -------------- An HTML attachment was scrubbed... URL:

Hi, Apologies if this has been asked before, but I don't seem to be able to find any info on it anywhere. Sometimes when placing a call on hold, the caller hears digitized/ robotic music on hold that gradually improves over the course of about 20 - 30 seconds until it sounds pretty normal. The first time the call is placed on hold the music sounds normal. If that same call is

Hello, In my scenario, the asterisk machine is installed behind a CISCO mediaGW in order to be able communicate with the PSTN. Asterisk is configured to use T.38 to send and receive faxes. I'm trying to receive a fax from a fax machine located in the PSTN. Apparently everything goes well: the fax machine says the transmission was successfully completed, and the fax file is successfully

Hello, I am using a Cisco 2,811 gateway to connect Asterisk over PRI to our Nortel TX-1 PBX. Up to now I had only the calling party names passed both ways. After upgrading the Cisco to the latest release (12.4.24T) it began honoring the "remote-part-ID" field sent by Asterisk and sends the *called*name to the Nortel. However, I still do not get the called name from the Nortel to

hi All I need your help , for used Digium Card TE405P, for setting this Board AS E1 ISDN PRI. 1 .Current for make sure my config its rights or no I inform my configurations in Board Jumper T1/E1 is Closed is that rights or no ? for E1 i closed the Jumper. 2. I Want To seeting E1 in ASterisk/PC Back To Back To Cisco E1 AS5300 Use ISDN Signaling, my configutration :

Hey all, I have an as5300 I use for dial in customers, we have 4 PRIs on it. We have a few free channels on it. I'm wondering if I setup SIP on the as5300 I can have asterisk use the free channels for dial out. I'd still have to use my TDM04B for incoming calls, but at least I can expand my outgoing. Anyone done anything like this before? I've never messed with VoIP on Cisco

Hi, How can I setup Asterisk to place calls if the same dial pattern can be routed through several PRI gateways. I have one way that I tried: exten => _9737XXXX,1,Dial(SIP/${EXTEN:1}@172.17.99.5) exten => _9737XXXX,2,Dial(SIP/${EXTEN:1}@172.17.99.6) exten => _9737XXXX,3,Dial(SIP/${EXTEN:1}@172.17.99.7) exten => _9737XXXX,4,Congestion exten => _9737XXXX,102,Busy

Dears I installed digium fax and followed the instruction at http://downloads.digium.com/pub/telephony/fax/README,And as you can see above that t38 is loaded I am using a call file to send fax1.tif file as fax to the gateway named add The problem that Addpac send always Receive 488 Not acceptable here,and lkindly find my debug attached Please advice. Thanks I Advance shark*CLI>

I just discover an "hidden" problem with AEL macro I want to have your feedback. If you use a macro to dial out, like &dialout(${EXTEN}), the leg extension will became ~~~~s~~~~ and if it happens you transfer the call, that will be the callerid appearing on the other phone display. I am just rewriting all the dialplan getting rid of the macro and using gosub, even if asterisk is

Hello, I need help in creating a simple PSTN Gateway. This is the scenario: -I have one client sending me VoIP traffic (they don't have asterisk, so IAX is out of the picture for me) and I need to validate that traffic (only accept calls coming from his IP). After that I would terminate the calls to the PSTN network and keep logs for billing purposes. -I have a TE405P board and

Hello, We have been working with the ReceiveFax application for some weeks now in order to receive faxes in T.38 and it works fairly well, but there are some faxes that for some reason we are not able to receive correctly. The asterisk version we are using is 1.6.0.6 with spandsp-0.0.5pre4 and the asterisk machine is behind a CISCO mediaGW to be able to communicate with the PSTN. The SIP call

List users, It's been a while since I've posted here, but I've been hard at work pushing toward our large scale Asterisk goal and keeping up with this list can be a full time job by itself (I have19,543 unread list messages!!). This Friday, September 16th 2005, my team will be at the MCI Development Lab in Richardson, Texas testing our setup. We have a three server system

I do part time consulting work. I need to setup an asterisk system to allow me to record both inbound and outbound calls to clients. I have one client that is just a PITA. The client has changed their mind three times so far and we are at step one. I have a spare slackware box and a seperate phone line for the consulting work. I have MCI Neighorhood as my carrier. What I need to know is: 1.

Hi, I have this scenario Cisco 5300 (public ip. 200.47.xx.xx) <---> Asterisk (public ip: 64.76.xx.xx) <--> Cisco 3600 (public ip: 64.76.xx.xx , same network than * ) When a calls comes in Cisco 5300, this send this calls with SIP to *, asterisk plays a welcome message and resend call to Cisco 3600 that have 4 analog lines connected... but after cisco play welcome message and when

adding gsm or just comment out the disallow and the 2 allows. (your recipient is using a codec that isn't ulaw or alaw). _____ From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of michel freiha Sent: Wednesday, January 28, 2009 2:21 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re:

adding gsm or just comment out the disallow and the 2 allows. (your recipient is using a codec that isn't ulaw or alaw). _____ From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of michel freiha Sent: Wednesday, January 28, 2009 2:21 PM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: