search for: dialpeer

Hello List. We are having some problems using t.38 together with a Cisco voice router at one of our providers end. We are using the new digium asterisk fax module to generate the fax, and when we use together with our internal Audiocodes Mediant 2000 gateways, we have no issues what so ever, and the faxes go right through. When we send faxes to our other provider, who has cisco hardware

...added features like unique FAX number for everyone in the company (which will be the same as phone DID), Voice mail, Auto Answer etc yet we need thousands of dollars to add those to our cisco call manager 4.1 set up. I have added the 3845 router as my SIP gateway (on asterisk 1.6.0.9), and also a dialpeer to forward on the router to forward calls to my asterisk. It works properly but the problem is there is NO AUDIO! I have tried to change codec but no sucess! Has anyone had the above set up working successfully? Attached are some confs. Thanks a lot for your assistance. Kind Regards, Wilson ----...

I am up to post 5 on my step-by-step but I hit a bit of a snag and so far my searches have failed me, I hope someone can help. (By the way, I added an asterisk index for quick navigation on the blog http://qvlweb.blogspot.com/2009/04/asterisk-pbx-install-index.html.) Here is the snag and I am hoping for a little help from the collective. Inbound I have 2 different numbers. I can call in on both

Hello all, We are looking for some hardware requirements/recommendations to be able to handle a full DS3's worth of TDM -> VoIP traffic. The DS3 would bring 24 calls per T1 x 28 T1s = 672 simultaneous calls. We would then need to convert those calls into G729 SIP VoIP calls to send to our asterisk box over ethernet. Since everything is going in/out of asterisk is 729, and no features

hi All Any body already setup asteriks call routing to Cisco AS5300 with SIP Server ? i need informations sample config for that, or can show how to route docs . thanks Dirgan --------------------------------- Meet your soulmate! Yahoo! Asia presents Meetic - where millions of singles gather -------------- next part -------------- An HTML attachment was scrubbed... URL:

...f but this pattern is typical. A few specifics about this problem: - It only happens when the call originates remotely from another identical Asterisk PBX. It never ever happens on a local call. It also never ever happens on an inbound call from a local PSTN gateway (Cisco router with a SIP dialpeer). It is only when the call comes from the remote PBX. SIP is being used throughout. - The problem happens almost every time when the called phone is a Polycom 601. It happens much more rarely on Cisco 7912, 7940 and 7941 handsets, although when it does happen the symptoms are the same. - Re...

Hello, In my scenario, the asterisk machine is installed behind a CISCO mediaGW in order to be able communicate with the PSTN. Asterisk is configured to use T.38 to send and receive faxes. I'm trying to receive a fax from a fax machine located in the PSTN. Apparently everything goes well: the fax machine says the transmission was successfully completed, and the fax file is successfully

Hello, I am using a Cisco 2,811 gateway to connect Asterisk over PRI to our Nortel TX-1 PBX. Up to now I had only the calling party names passed both ways. After upgrading the Cisco to the latest release (12.4.24T) it began honoring the "remote-part-ID" field sent by Asterisk and sends the *called*name to the Nortel. However, I still do not get the called name from the Nortel to

...fter make a call, if used debug isdn q931 in cisco AS5300 config : isdn siwtch-type primary-net5 controller e1 0 framming crc4 linecode hdb3 pri-group 1-31 interface serial0:15 isdn switch-type primary-net5 isdn incomming-voice modem isdn T310 60000 dialpeer,.....blah,...blahh thanks for ur help Dirgan Send instant messages to your online friends http://asia.messenger.yahoo.com -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20060412/21daf...

Hey all, I have an as5300 I use for dial in customers, we have 4 PRIs on it. We have a few free channels on it. I'm wondering if I setup SIP on the as5300 I can have asterisk use the free channels for dial out. I'd still have to use my TDM04B for incoming calls, but at least I can expand my outgoing. Anyone done anything like this before? I've never messed with VoIP on Cisco

Hi, How can I setup Asterisk to place calls if the same dial pattern can be routed through several PRI gateways. I have one way that I tried: exten => _9737XXXX,1,Dial(SIP/${EXTEN:1}@172.17.99.5) exten => _9737XXXX,2,Dial(SIP/${EXTEN:1}@172.17.99.6) exten => _9737XXXX,3,Dial(SIP/${EXTEN:1}@172.17.99.7) exten => _9737XXXX,4,Congestion exten => _9737XXXX,102,Busy

Dears I installed digium fax and followed the instruction at http://downloads.digium.com/pub/telephony/fax/README,And as you can see above that t38 is loaded I am using a call file to send fax1.tif file as fax to the gateway named add The problem that Addpac send always Receive 488 Not acceptable here,and lkindly find my debug attached Please advice. Thanks I Advance shark*CLI>

I just discover an "hidden" problem with AEL macro I want to have your feedback. If you use a macro to dial out, like &dialout(${EXTEN}), the leg extension will became ~~~~s~~~~ and if it happens you transfer the call, that will be the callerid appearing on the other phone display. I am just rewriting all the dialplan getting rid of the macro and using gosub, even if asterisk is

Hello, I need help in creating a simple PSTN Gateway. This is the scenario: -I have one client sending me VoIP traffic (they don't have asterisk, so IAX is out of the picture for me) and I need to validate that traffic (only accept calls coming from his IP). After that I would terminate the calls to the PSTN network and keep logs for billing purposes. -I have a TE405P board and

Hello, We have been working with the ReceiveFax application for some weeks now in order to receive faxes in T.38 and it works fairly well, but there are some faxes that for some reason we are not able to receive correctly. The asterisk version we are using is 1.6.0.6 with spandsp-0.0.5pre4 and the asterisk machine is behind a CISCO mediaGW to be able to communicate with the PSTN. The SIP call

List users, It's been a while since I've posted here, but I've been hard at work pushing toward our large scale Asterisk goal and keeping up with this list can be a full time job by itself (I have19,543 unread list messages!!). This Friday, September 16th 2005, my team will be at the MCI Development Lab in Richardson, Texas testing our setup. We have a three server system

I do part time consulting work. I need to setup an asterisk system to allow me to record both inbound and outbound calls to clients. I have one client that is just a PITA. The client has changed their mind three times so far and we are at step one. I have a spare slackware box and a seperate phone line for the consulting work. I have MCI Neighorhood as my carrier. What I need to know is: 1.

Hi, I have this scenario Cisco 5300 (public ip. 200.47.xx.xx) <---> Asterisk (public ip: 64.76.xx.xx) <--> Cisco 3600 (public ip: 64.76.xx.xx , same network than * ) When a calls comes in Cisco 5300, this send this calls with SIP to *, asterisk plays a welcome message and resend call to Cisco 3600 that have 4 analog lines connected... but after cisco play welcome message and when

...t></p> <div> <p class=3DMsoNormal style=3D'margin-bottom:12.0pt'><font size=3D3 face=3D"Times New Roman"><span style=3D'font-size:12.0pt'>Do you mean = call limit on the extension or on the outgoing gateway? Kindly note that my outbound = dialpeer has meeb defined as follow:<br> <br> [outbound]<br> exten =3D&gt; _X.,1,Dial(SIP/${EXTEN}@Outbound_GW,60)<br> Regards<o:p></o:p></span></font></p> <div> <p class=3DMsoNormal><font size=3D3 face=3D"Times New Roman"&...

...p></o:p></span></font></p> <div> <p class=3DMsoNormal><font size=3D3 face=3D"Times New Roman"><span = style=3D'font-size: 12.0pt'>Do you mean call limit on the extension or on the outgoing = gateway? Kindly note that my outbound dialpeer has meeb defined as follow:<br> <br> [outbound]<br> exten =3D&gt; _X.,1,Dial(SIP/${EXTEN}@Outbound_GW,60)<br> Regards<o:p></o:p></span></font></p> <div> <div> <p class=3DMsoNormal style=3D'margin-bottom:12.0pt'>&...