Dears I installed digium fax and followed the instruction at
http://downloads.digium.com/pub/telephony/fax/README,And as you can see
above that t38 is loaded
I am using a call file to send fax1.tif file as fax to the gateway named
add
The problem that Addpac send always Receive 488 Not acceptable here,and
lkindly find my debug attached
Please advice.
Thanks I Advance
shark*CLI> fax show capabilities
shark*CLI>
Registered Fax Technology Modules:
Type : T.38
Description : Digium Fax T.38 Driver
Capabilities : SEND, RECEIVE, UDP
Type : G.711
Description : Digium Fax G.711 Driver
Capabilities : SEND, RECEIVE
2 registered modules
************My Call File***************
Channel: SIP/6789 at add
MaxRetries: 2
WaitTime: 20
Extension: s
Priority: 1
Context: fax-tx
*************My sipconf**************************
Cisco Gateway
[add]
host=212.56.151.216
username=***userid***
secret=***password***
type=peer
t38pt_udptl = yes
*************My extension.conf**************************
[fax-tx]
exten => s,1,NoOp(**** SENDING FAX ****)
exten => s,n,Wait(6)
exten => s,n,Set(GLOBAL(FAXCOUNT)=$[ ${GLOBAL(FAXCOUNT)} + 1 ])
exten => s,n,Set(FAXCOUNT=${GLOBAL(FAXCOUNT)})
exten => s,n,Set(FAXFILE=fax1.tif)
; Set FAXOPTs
exten => s,n,NoOp(**** SETTING FAXOPT ****)
exten => s,n,Set(FAXOPT(filename)=${FAXFILE})
exten => s,n,Set(FAXOPT(ecm)=yes)
exten => s,n,Set(FAXOPT(headerinfo)=Fax from ${GLOBAL(LASTFAXCALLERNAME)} at
${GLOBAL(LASTFAXCALLERNUM)} was received.)
exten => s,n,Set(FAXOPT(localstationid)=1234567890)
exten => s,n,Set(FAXOPT(maxrate)=14400)
exten => s,n,Set(FAXOPT(minrate)=2400)
; Send the fax
exten => s,n,NoOp(**** SENDING FAX : ${FAXFILE} ****)
exten => s,n,SendFAX(/tmp/${FAXFILE},d)
; Hangup! Print FAXOPTs
exten => h,1,NoOp(FAXOPT(ecm) : ${FAXOPT(ecm)})
exten => h,n,NoOp(FAXOPT(filename) : ${FAXOPT(filename)})
exten => h,n,NoOp(FAXOPT(headerinfo) : ${FAXOPT(headerinfo)})
exten => h,n,NoOp(FAXOPT(localstationid) : ${FAXOPT(localstationid)})
exten => h,n,NoOp(FAXOPT(maxrate) : ${FAXOPT(maxrate)})
exten => h,n,NoOp(FAXOPT(minrate) : ${FAXOPT(minrate)})
exten => h,n,NoOp(FAXOPT(pages) : ${FAXOPT(pages)})
exten => h,n,NoOp(FAXOPT(rate) : ${FAXOPT(rate)})
exten => h,n,NoOp(FAXOPT(remotestationid) : ${FAXOPT(remotestationid)})
exten => h,n,NoOp(FAXOPT(resolution) : ${FAXOPT(resolution)})
exten => h,n,NoOp(FAXOPT(status) : ${FAXOPT(status)})
exten => h,n,NoOp(FAXOPT(statusstr) : ${FAXOPT(statusstr)})
exten => h,n,NoOp(FAXOPT(error) : ${FAXOPT(error)})
*********************************************
No employee or agent is authorized to conclude any binding agreement on behalf
of Xplorium with another party by e-mail without express written confirmation by
an officer of Xplorium. Any views expressed by an individual in this electronic
message do not necessarily reflect views of Xplorium or its subsidiaries and
associates.
This electronic message and its attachments are solely addressed to the
addressee(s), and contain confidential information protected from disclosure
belonging to Xplorium.
If you are not the intended addressee of this electronic message and its
attachments, kindly delete it immediately from your system and notify the sender
by electronic mail. You must not copy this message or attachment or disclose its
content to any other person.
Xplorium does not guarantee the integrity of this electronic message and any of
its attachments, or that they are free from computer viruses or other defects.
*********************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20090515/e4b77ce1/attachment.htm
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: debug.txt
Url:
http://lists.digium.com/pipermail/asterisk-users/attachments/20090515/e4b77ce1/attachment.txt