search for: dectected

I noticed when I call certain IVR systems, such as 1800calldhl, that Asterisk will not barge the prompt. Would this imply that Asterisk has an Early media detection problem. Is anyone else experiencing this problem. Is there a fix? Kurt

hi all , i just met a strange problem about my wireless network , i installed ipw3945 driver and it can detect the wireless network lists around my laptop ,but , i can't connect to the wireless network even under the right authority my centos 5.2 dectected my wirless network card as eth1 , it's really strange , i think any help ? thx and wish you a happy new year :) -- Keep It Simple Stupid Thomas X. Iverson

Hi, While testing the Opus Decoder we came across the following: If the decoder encounters an 'Invalid Payload Length' the decoding of the stream is stopped. Also, when the decoder encounters 'Range coder state mismatch', the decoding of the stream is stopped. I believe that it should reject the erroneous payload and start decoding the next payload for it to work properly in a

https://bugzilla.mindrot.org/show_bug.cgi?id=3196 Bug ID: 3196 Summary: [Information Disclosure] OpenSSH_7.4p1 Raspbian-10+deb9u7 discloses OS version Product: Portable OpenSSH Version: 7.4p1 Hardware: Other OS: Other Status: NEW Severity: security Priority: P5

It seems that 2.03-pre1 resolves PXELINUX problem on a reasonable number of hosts. Perhaps somewhat importantly this seems to include the RBFG PXE boot floppy, which did not work with 2.02. This was somewhat of a surprise, since it didn't exhibit the failure mode that I would have thought would have been the trigger of the bug. Instead, it was one of those stacks that would transmit packets

Hi, MixMonitor saves partial conversation when non-standard voice packet size is set (Asterisk 1.4.18.1). For example, if SIP-peer has alaw:30 then saved file would contain only 67% of total conversation. With alaw:20 MixMonitor saves 100% of conversation. It seems that MixMonitor has hardcoded "packets per second" or "samples per packet" values. I did a lot of googling, but

Hi, I try to install a VMware VM via virsh with a vmxnet3 network card. Virsh sends me an error : "Insufficient video RAM. The maximum resolution of the virtual machine will be limited to 1176x885. To use the configured maximum resolution of 2560x1600, increase the amount of video RAM allocated to this virtual machine by setting svga.vramSize="16384000" in the virtual

On 2013-10-04 1:34 PM, Rhishikesh Agashe wrote: > I believe that it should reject the erroneous payload and start decoding > the next payload for it to work properly in a streaming environment. Because the decoder's predictor state converges over multiple packets of data, you cannot just skip to the next payload without introducing decoding errors. We have also tried to make the

Have you set port 2 as 'NT' in the mISDN config file (not the Asterisk one)? Also, you will probably need to set it to ptmp. You need to configure them in misdn.conf (the Asterisk one this time). Here's the tail of my misdn.conf (4 x BRI): [trunks] ports = 1,2 ; physical port numbers (as defined in mISDN.conf) context = inbound ; context for incoming calls in

Hi there, Besides the problem of Voicetronix dialing too early before the carrier gives a dial tone, there also appears to be issues with the audio quality when more than 1 channel is utilized.

I have found that Samba does not seem to handle the ^M EOL character very well. This seems to be a big problem with Windows Notepad and then in vi for UNIX. Other than the ux2dos and dos2ux commands does anyone know of another solution or if this has been fixed in a more current release of Samba? Thanks! Eric -------------- next part -------------- A non-text attachment was scrubbed... Name:

I''m using an RXTable in my application and I would like to be able to select a row and then press the Delete key to delete the selected row. This does not seem to work, however, as apparently keypresses are not initially recognized. In my FXTable derived class I have: connect(SEL_KEYRELEASE) do |sender, selector, event| puts "code = #{''%X'' %

Hi All, This may be an off topic but I'm not sure who else would know the answer. I'm playing around with Asterisk and Polycom phones. I see Polycom supports quite a few codec. The usual ones and these: G722 Siren14.24kbps Siren22.32kbps Siren14.32kbps Siren22.48kbps Siren14.48kbps Siren22.64kbps G7221.16kbps

Even I've left this thread. I guess we're all waiting for Lee to turn Blue. ;-> Or is it Red (Hat)? ;-> Okay Lee, we all agree, Red Hat makes stupid decisions, adopts buggy software - especially the kernel and Red Hat is to blame for the decisions in the kernel, and also stupidly backports fixes instead of adopting newer versions with the fixes. And there is absolutely no need for

hello: thanks for Tzafrir Cohen for dahdi testing. I installed dahdi-2.1-r3c svn code and asterisk1-6 for testing OpenVox B400P and junghans card. i fund that there is bug (i think) to dectect NT or TE mode. actually on the board, i set it as TE mode, but after start wcb4xxp, but it show the port is NT mode. to detect the TE mode, I modefy the code in base.c

...eau (1): dri2: add virtio-gpu pci ids Marek Chalupa (3): xwayland: fix memory leaks on error paths in xwl_realize_window xwayland: check if creating xwl_output succeeded xwayland-shm: fortify fallocate against EINTR Matthieu Herrb (1): Autoconfig: Fix the loop adding dectected drivers to the list of screens Michael Stapelberg (1): Also dump passive grabs on XF86LogGrabInfo Michael Thayer (1): xi2: fix FocusIn grabs Michel Dänzer (48): randr: Stop dirty tracking for shared pixmap being destroyed prime: Damage full destination rectangle when we s...

Ok, we might have found something here. I created a small script, see below, easy to adapt. So, after running this i see the same problem as in : https://bugzilla.samba.org/show_bug.cgi?id=14268 If i do it manualy everything works fine. But if i "past the commands or run the script" Then i see this problem.. So im thinking here, the speed of adding is creating somekind or