search for: dchannel

Hi: I'm using a te110p E1 card in Spain. There is way to change the dchan channel number? Here in Spain there is a voice company that works with dchannel in channel number 31. I must to set channels from 1 to 30 and dchan to 31 but when asterisk loads the chan_zap.c it says that channel 16 is reserve for dchan. Can you help me? Cheers. -- Jos? Luis Garc?a Ext. Pineda 2002001 Ext. Palafolls 2006001 Ext. FWD 603249 Afinat.org mailto:jlgarcia@a...

We have install a DS3 with 28 DS1's we have an Adtran MUX breaking out the DS1's, we are trying to setup the system with 2 dchannels for each 4 DS1's. Everything looks fine when modprobe zaptel and wct4xxp and ztcfg -vvvvvv but when I asterisk asterisk it says: Aug 10 16:33:32 ERROR[8954]: chan_zap.c:6750 mkintf: Channel 24 is reserved for D-channel. Aug 10 16:33:32 ERROR[8954]: chan_zap.c:9990 setup_zap: Unable to reg...

I just started getting this error and its preventing me from having any incomming calls: chan_zap.c:7542 pri_dchannel: Ring requested on channel 0/2 already in use on span 1. Hanging up owner. PRI has been working fine. I didn't know anything was wrong until someone came and said their DID wasn't working. You call their DID, asterisk shows the message above and you get fast busy. But I can make outgoing...

I just started getting this error today (I've gotten this error befor) and its preventing me from having any incoming calls: chan_zap.c:7542 pri_dchannel: Ring requested on channel 0/2 already in use on span 1. Hanging up owner. PRI has been working fine. I didn't know anything was wrong until someone came and said their DID wasn't working. You call their DID, asterisk shows the message above and you get fast busy. But I can make outgoing...

How can we set the CDR Master file to rollover at say 30 Meg and create a new one -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100827/2e98385f/attachment.htm

I've been going back and forth with my telco for several days, trying different configurations to get a new PRI to come up. The bchannels are all up and the T1 is not in alarm status. The dchannel refuses to come up however. We've tried ni2, qsig, and now dms100 for the switchtype. The telco tech I've been working with says that he's been sending "reset all channels" signals to my system, to which he's getting an "establish remote" response from my aster...

Hello Armin, > The card is telling: > > CAPI INFO 0x34a2: No circuit / channel available > > so the other channel must be in use by something else. > Maybe another device on the ISDN line? > I have tested it several times now and always entered "capi info" before and after the call. The answer was always: Contr1: 2 B channels total, 2 B channels free. I'm

...,0,d4,ami e&m=1-24 =================================== # cat /etc/asterisk/zapata.conf ; ; Zapata telephony interface ; ; Configuration file [trunkgroups] ; ; Trunk groups are used for NFAS or GR-303 connections. ; ; Group: Defines a trunk group. ; group => <trunkgroup>,<dchannel>[,<backup1>...] ; ; trunkgroup is the numerical trunk group to create ; dchannel is the zap channel which will have the ; d-channel for the trunk. ; backup1 is an optional list of backup d-channels. ; ;trunkgroup => 1,24,48 ; ; Spanmap: As...

Can anyone describe the asterisk implementation of this any better than the sample config files do? from zapata.conf ; Trunk groups are used for NFAS or GR-303 connections. ; ; Group: Defines a trunk group. ; group => <trunkgroup>,<dchannel>[,<backup1>...] ; ; trunkgroup is the numerical trunk group to create ; dchannel is the zap channel which will have the ; d-channel for the trunk. ; backup1 is an optional list of backup d-channels. ; ;trunkgroup => 1,24,48 ; ; Spanmap: As...

Today we have been having some problems with the dchannel of out T1's. I was wondering if there is a way for asterisk to send out an email or page whenan error occurs. Not I know errors happen quite offen for many reasons, but I would like an email sent when there is a TI problem, or specefic other problems. I am using the safe_asterisk to run ast...

Hi guys, Currently I just purchased the TE205P for the installation of my ISDN30 setup. I compiled, setup the card correctly I think. When I do the ztcfg -vvv it shows all 31 channels clear, with 30 bchannels using for voice ranging from 1-15, 17-31, and 16 is the dchannel. However, when I do a cat /proc/zaptel/1 I see only 24 channels configured, and then, when I do a cat /proc/zaptel/2 I see the rest 7 channels. I setup the jumper correctly all closed to use the card in E1 mode.. I'm not sure what I did wrong here but the card should just display all 31 channel...

Hi! I have problems with the ToN configurations in chan_capi-cm. I understand how incoming calls are rewritten using national and international prefix. But for outgoing calls - what is the ToN? Further, is there any debug info of the Ton? "capi debug" and the divactrl dchannel both show the CLI and CDLI, but do not show the ToN. How can I set the ToN? I suspect chan_capi to use the received ToN also for outgoing calls when bridging calls. How can I verify this? thanks Klaus

Hii all I bought te110p card. I configured zaptel.com ; span=1,1,0,ccs,hdb3,crc4 bchan=1-15,17-31 dchan=16 and zapata.conf is; switchtype=euroisdn signalling=pri_net group=1 context=nortel dchannel => 16 channel => 1-15,17-31 I receving the following error on my gentoo; May 18 13:48:44 WARNING[8755]: Ignoring canpark May 18 13:48:44 WARNING[8755]: Ignoring dchannel May 18 13:48:44 ERROR[8755]: Channel 24 is reserved for D-channel. May 18 13:48:44 ERROR[8755]: Unable to register channel...

...rmin?) ! Today I had a problem with Diva Server 4BRI-8M 2.0. Asterisk 1.2.12.1 chan_capi-cm-0.6.5 divas4linux-melware-3.0.f-106.622-1 Asterisk could not receive and make calls on the BRI ports, although the ports looked fine within Asterisk. I usually use "/usr/lib/divas/divactrl dchannel -c 1" to test line activity. This time there was no activity (cryptic log messages) (I waited for 10 minutes). Then I restarted Asterisk - but no improvement. Then I wanted to remove and reload the diva kernel modules, but /usr/lib/divas/divas_stop.rc could not remove the modules. Also man...

I've read as much as I can on this error and still can't seem to figure out what's causing this error: Jun 23 20:54:58 NOTICE[7483]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Jun 23 20:55:03 NOTICE[7483]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 Jun 23 20:55:03 NOTICE[7483]: chan_zap.c:7395 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of sp...

...Received MDL/TEI managemement message, but configured for mode other than PTMP! So, with PTMP it says we don't get a TEI message and without it, it says we do! :) Either way we also get the following message non stop in the console: [Jan 21 17:33:42] NOTICE[20419]: chan_dahdi.c:12946 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 2 [Jan 21 17:33:42] NOTICE[20419]: chan_dahdi.c:12946 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1 If we change the hardhdlc to dchannel instead the message goes away, but obviously it doesn't work :)...

...ed to make experiment and made loopback (pins 1 4 , 2 5) and put it in card and card become green (I hope that is sign card is ok) but on CLI i can see following error message WARNING: We think we are cpe but they think they are cpe too ERROR: got ! frame in state 8 and soon after something like no Dchannel using 16 anyway.Is it normal ? Don't I need to see reconfiguring or reset channel 1 to 30 ? My zaptel.conf and zapata.conf are probably ok because i copied them from another system where everything works fine. I installed asterisk through book on my Ubuntu 8.04 server system.Only thing I didn...

...ugh. Is this how it is supposed to behave? From all the docs I can find, it doesn't seem so. Seems to me that the s extension in [default] should work. What are other people's experiences hooking up TDM hardware for incoming calls? The message is coming from chan_zap.c in the function pri_dchannel, case: PRI_EVENT_RING, line 8563, as an else clause for (overlapdial && ast_canmatch_extension). I am running asterisk-1.2/zaptel-1.2/libpri-1.2 branches on CentOS 4.2 x86_64, Dual Opteron, with Sangoma 104d's hooked right up to a switch in a datacenter on T-1's configured as PRI...

Can anyone explain to me the difference in zaptel.conf and zapata.conf? I'm trying to get a real clear understanding of them but its getting a little murky in places. I will be setting up a PBX running asterisk with 2 T100P cards. I will be bringing a 23 channel PRI into one card and connecting the other card to a Nortell 24 channel FXS channel bank. As I understand it zapata.conf is

We've been trying unsuccessfully to connect our Meridian Option 81C to a TE110P via PRI. We've followed the directions in asterisk-meridian-a1.pdf (link on http://www.voip-info.org/wiki/view/Asterisk+legacy+integration), but it doesn't seem to work on our 81C (even though many, many users report it works very well on Option 11's). Has anyone had any success in getting the above