search for: db9

All I apologize if this is slightly off topic, but I'm in the process of trying to get NUT working and I've discovered the need for a serial port probe that is native db9 - native db9 (the thought of hanging a probe plus two db9-db25 adapters plus a cable on a UPS bothers me greatly). I'm not looking for anything fancy, just a little gender changer with a buncha LEDs on it. However, every search for "db9/analyzer/probe/breakout/rs232" and any com...

Hi guys, just to let u known the pinout for the adapter : Adapter for connect the E1 telco lines on my digium card DB9 RJ45 3 1 8 2 2 4 6 5 Adapter used for connect the Hicom150 traditional PBX on my digium card (cross connection) DB9 RJ45 3 4 8 5 2 1 6...

...client called "tor" before the UPS power drains out, I'd prefer to use a direct serial cable instead of network, in case the network doesn't work. I'll manage the UPS trough the ethernet using the built-in HTTP webinterface in the HP UPS Management Module. I've created a DB9-RJ45 cable according to the spec (called "-RJ-45 Serial 1-5 (5-Port)") released by Brian Vo in this forumthread: http://forums11.itrc.hp.com/service/forums/questionanswer.do?admit=109447626+1277983799644+28353475&threadId=1320596 So this is how my cable look like now: DB9-3 <---...

...status=1) My ups.conf looks like this: [gentoo] driver = cyberpower port = /dev/ttyS0 desc = "gentoo UPS" Permission on /dev/ttyS0 are 777 while I'm testing so I don't think this is a "user" related issue. I've tried this with a straight through DB9 cable and the CyberPower DB9 cable which I was told by tech support was straight through, but not every pin is hooked up. Neither worked. Also, CyberPower has a linux module that works with both cables, but isn't network capable and won't work with my other setup which has its ow...

Hello all I've a brand-new APC box, model Smart-UPS RT 5000, which comes with a black cable RJ48 in one side (10P4C) and RS232-DB9 in the other. The cable reads "940-1525A" in the DB9 side. Which is the best setting (driver and options) to connect this UPS to my computer? It seems not to be recognized by a typical apcsmart driver setting. Many thanks Noel Torres er Envite

I can't seem to get my serial terminal to work with my new system. I had a serial terminal connected to my old system that worked great and copied /boot.config, /boot/loader.conf and /etc/ttys settings over from it. The new system has a Gigabyte GA970A-UD3 board with just a serial header on the board. I bought a serial connector backplate in an electronics store and connected it to the

...easeNotes?pathrev=Release-3_14_11 > > and if you need connectivity with an existing NUT setup: > > http://www.networkupstools.org/docs/man/apcupsd-ups.html This seems to me a little bit complicated :-( Instead, can I use the apcsmart driver with the provided 940-0625a c?ble (RJ45/DB9 connectors) ? Or do I need to acquire an AP9620 SmartSlot expansion card, as I've seen in the Hardware compatibility list page ? -- Frantz de Germain D?partement Informatique UFR Sciences / DDN Universit? d'Angers

...can too (albeit the developers and users on this list are usually more helpful than me). Just to confirm, it sounds like you are looking at the SU5000RT4UHV, correct? https://www.tripplite.com/smartonline-208-240v-5kva-4.5kw-double-conversion-ups-4u-rack-tower-extended-run-snmpwebcard-option-usb-db9-serial~SU5000RT4UHV Thank you, David Zomaya Business/Quality Analyst- Software Tripp Lite <http://www.tripplite.com/> ________________________________ From: Nut-upsuser <nut-upsuser-bounces+david_zomaya=tripplite.com at alioth-lists.debian.net> on behalf of Lee Damon <noma...

On Dec 16, 2014, at 9:45 AM, Frantz de Germain <frantz at info.univ-angers.fr> wrote: > Bye the way I just realize that I can't retrieve the ups.load, among other > thing :-( To the best of my knowledge, Microlink is not supported by any third-party tools (including NUT), but some variables are exposed via standard USB HID. Apparently, ups.load is not one of them. Your UPS might

...e Wiring Diagram | | This information is verified and tested to be 100% correct. | | | +-----------------------------------------------------------------+ | | | DB9M(UPS) 2m Cable DB9F(Computer) | | --------- -------- -------------- | | | | (SHELL)<---------+----//----+----------------<(SHELL) | | |...

...as some defaults for file transfer programs. Is there an easy way to transfer a file, and see if characters get dropped under load? > I have not tried file transfer, I just typed in the terminal. > Also, is that null-modem cable wired to test hardware handshaking? It is actually a pair of DB9-RJ45 adapters connected with a regular cat5 patch cord. I use these adapters to connect to serial port on servers, switches, routers, etc., and I know it works there. All pins on the adapter are connected, so it should support hardware handshake. > >> I disconnect UPS from Ubuntu system,...

...and fairly mixed so I thought I'd ask here... Does anyone on this list have experience with these UPSs? Any thoughts? Would you buy it again? Does it work well with NUT? thanks, nomad F.T.R. the full description is "Tripp Lite UPS Smart Online 5000VA 4500W Rackmount 5kVA 200V/240V USB DB9 4URM ENERGY STAR V2.0 - UPS - AC 200/208/220/230/240 V - 4.5 kW - 5000 VA - RS-232, USB - output connectors: 4 - 4U - attractive black" I'm sure the "attractive black" part is critical.

Hello Im from Denmark and i've just got my Digium TE405P. But i have some problems when i connect it to my E1 connection (ISDN30). My telco delivered a alcatel box witch have a G.703 120ohm (DB9 with a serial to rj45) and a 75ohm coax connection. I've tried to connect using the 120ohm with rj45 and a ordinary utp cable. But it dosent seem to work. I've tried several zaptel.conf setting, but none of them made the led stop blinking. <my current zaptel.conf> span=1,1,0,ccs,hdb3...

I have a TrippLite SmartPro UP (SMART3000RM2U) that shipped with the DB9 cable# 73-0866. nut doesn't recognize the UPS using the tripplite driver. I found this page: http://www.tripplite.com/support/download/PA12/help/device.htm The link lists the SmartPro series as using the cables 73-0724 or 73-0844 and the Internet 350/525 is listed as using a cable 73-0866....

Hi, i had purchase a MGE-Ellipse 500 and i'm trying to use the DB9 F / RJ45 cable send by MGE with UPS. Which driver i'm suppose to use: mge-utalk or mge-shut ? When i try mge-utalk i've got this message: # upsdrvctl start Network UPS Tools - UPS driver controller 2.0.0 Network UPS Tools - MGE UPS SYSTEMS/U-Talk driver 0.80.3 (2.0.0) Startup timer elapsed...

...company recently bought a Smart-Ups RT model: SURT3000XLI and a I cannot do to make work it with last version of nut software. Maybe this model it doesn?t supported yet and I want to know if so. The diference with others models like matrix or backup ones is the famous Smart Cable: 940-1525A (utp - db9). I appreciate any response. Thank you. Regards. -- cosechero :wq! -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20090514/e1db8ea7/attachment.htm>

...company recently bought a Smart-Ups RT model: SURT3000XLI and a I cannot do to make work it with last version of nut software. Maybe this model it doesn?t supported yet and I want to know if so. The diference with others models like matrix or backup ones is the famous Smart Cable: 940-1525A (utp - db9). I appreciate any response. Thank you. Regards. -- cosechero :wq! -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsdev/attachments/20090514/e1db8ea7/attachment.htm>

    Lately I replaced my 10+-year-old server with a nano-ITX-type one that has USB but not old serial ports.  I connected my FE700VA to DB25-to-9-to-USB cables, but haven't been able to set it up. Apparently my DB9-to-USB cable (Prolific Technology, Inc. PL2303 Serial Port) has issues needing old software (setserial?) and some new software (fconfigure) being changed.  Has anyone managed to do something like this?     I'm still also interested in knowing how to control the three UPSes I have in the hou...

...han the others. It has only an RS232 port on the back, and I need help finding out what interface it uses. The chips inside are just voltage comparators and doesn't seem to have a proper "serial" data interface, it only has a small board containing a pair of opto couplers going to the DB9 plug. You can see pictures of the output board here (onedrive): http://1drv.ms/1A3ryEp http://1drv.ms/1A3ryEp The only pins used seems to be 2, 4 and 5. ?Is it a RUPS interface? ?What cable pinout do I need to build? Thanks!!! -------------- next part -------------- An HTML attachment was scru...

...can too (albeit the developers and users on this list are usually more helpful than me). Just to confirm, it sounds like you are looking at the SU5000RT4UHV, correct? https://www.tripplite.com/smartonline-208-240v-5kva-4.5kw-double-conversion-ups-4u-rack-tower-extended-run-snmpwebcard-option-usb-db9-serial~SU5000RT4UHV Thank you, David Zomaya Business/Quality Analyst- Software Tripp Lite <http://www.tripplite.com/> ________________________________ From: Nut-upsuser <nut-upsuser-bounces+david_zomaya=tripplite.com at alioth-lists.debian.net> on behalf of Lee Damon <noma...