search for: d31

Greetings all- I have a new X4200 that I''m getting ready to deploy. It has four 146 GB SAS drives. I''d like to setup the box for maximum redundancy on the data stored on these drives. Unfortunately, it looks like ZFS boot/root aren''t really options at this time. The LSI Logic controller in this box only supports either a RAID0 array with all four disks, or a RAID 1

Hello, This is the second version of this patch series. I only implement the VPF context switch support for arm32 and add dummy function to avoid compilation on arm64. I have switched the order of the patch because the old second one can be applied alone and the patch are cleaner :). For all the changes see each patch. Cheers, Julien Grall (2): xen/arm: don''t enable VFP on XEN

I'm having a Thursday morning mental block, any suggestions on the following would be most appreciated... I have (as an example) surgery = c("d48", "d67", "dnc37", "a75", "d10", "a78", "d31", "d55", "d1") before each number part the possibilities are c("a", "d", "dnc"), I'm trying to split each element in "surgery" so that I have, status time d 48 d 67 dnc 37 a 75 d 10 a 78 d...

...nd a ZFS raidz stripe. Each disk (of 4) is divided up like this / 6GB UFS s0 Swap 8GB s1 /var 6GB UFS s3 Metadb 50MB UFS s4 /data 48GB ZFS s5 For SVM we do a 4 way mirror on /,swap, and /var So we have 3 SVM mirrors d0=root (sub mirrors d10, d20, d30, d40) d1=swap (sub mirrors d11, d21,d31,d41) d3=/var (sub mirrors d13,d23,d33,d43) For ZFS we have a single Raidz set across all four disks s5 Everything has worked flawlessly for some time. This week we discovered that one of our 4200''s is reporting some level of failure with regards to one of the disks We see these recu...

...py () has to be used. (also applies to memmove, memset, memclr) On ARM I have seen implementations of memcpy () using floating-point registers (if compiled with NEON support). The is perfectly legal, as memcpy () only needs to comply with the Procedure Call Standard. According to this d0-d7, d16-d31 are scratch registers. The situation is slightly different for __aeabi_memcpy (). The ABI spec explicitly states: "In general, implementations of these functions are allowed to corrupt only the integer core registers permitted to be corrupted by the [AAPCS] (r0-r3, ip, lr, and CPSR)."...

On 11 April 2016 at 02:43, Renato Golin via llvm-dev <llvm-dev at lists.llvm.org> wrote: > This is standard AAPCS, I trully hope neither glibc, newlib or musl's > implementations will corrupt anything more. Normal AAPCS functions are allowed to corrupt d0-d7 and d16-d31, but the RTABI seems pretty explicit that these functions aren't. I think we've got a real problem here. Cheers. Tim.

...one(roots2, suffix) d21 = myone(roots2, suffix2) d22 = myone(roots2, suffix3) d23 = myone(state, roots) d24 = myone(city, roots) d25 = myone(cityst, roots) d26 = myone(inscompany, roots) d27 = myone(state, roots2) d28 = myone(city, roots2) d29 = myone(cityst, roots2) d30 = myone(inscompany, roots2) d31 = mytwo(state, roots, suffix) d32 = mytwo(city, roots, suffix) d33 = mytwo(cityst, roots, suffix) d34 = mytwo(inscompany, roots, suffix) d35 = mytwo(state, roots, suffix2) d36 = mytwo(city, roots, suffix2) d37 = mytwo(cityst, roots, suffix2) d38 = mytwo(inscompany, roots, suffix2) d39 = mytwo(state...

...] "c31" "c32" "c33" "d11" "d12" "d13" [31] "d14" "d21" "d22" "d23" "d24" "d25" [37] "d31" "d32" "d33" "e11" "e12" "e13" [43] "e21" "e22" "e23" "e31" "e32" "e33" [49] "f11"...

Xen: 3.2.1-rc5 64bit Dom0: 2.6.18.8 (at cs 524) 32-pae DomU: 2.6.26-rc8 32-pae root at newark13:~# xm create -f /linodes/xencaker/xen.conf -c Using config file "/linodes/xencaker/xen.conf". Started domain xencaker root at newark13:~# root at newark13:~# xm dmesg ... (XEN) traps.c:413:d332 Unhandled invalid opcode fault/trap [#6] on VCPU 0 [ec=0000] (XEN)

...me? Stefan -- Stefan M?rkle Netpioneer GmbH Leitender Systemarchitekt Beiertheimer Allee 18 <stefan.maerkle@netpioneer.de> 76137 Karlsruhe *** Besuchen Sie uns vom 09.03.- 15.03.2006 auf der Cebit 2006 in Hannover. Sie finden uns in Halle 3 auf Stand D31 als Mitaussteller der Imperia AG ***

...ef,dead>, %D20<imp-def,dead>, %D21<imp-def,dead>, %D22<imp-def,dead>, %D23<imp-def,dead>, %D24<imp-def,dead>, %D25<imp-def,dead>, %D26<imp-def,dead>, %D27<imp-def,dead>, %D28<imp-def,dead>, %D29<imp-def,dead>, %D30<imp-def,dead>, %D31<imp-def,dead>, %CPSR<imp-def,dead> 0xeb000000 JIT: 0x4512e028: %R0<def> = LDR %SP, %reg0, 4, 14, %reg0, Mem:LD(4,4) [b + 0] 0xe59d0004 JIT: 0x4512e02c: %R0<def> = ADDri %R0<kill>, 10, 14, %reg0, %reg0 0xe280000a JIT: 0x4512e030: %SP<def> = ADDri %SP<kill...

...d26 = myone("inscompany", "roots") d27 = myone("state", "roots2") d28 = myone("city", "roots2") d29 = myone("cityst", "roots2") d30 = myone("inscompany", "roots2") d31 = mytwo("state", "roots", "suffix") d32 = mytwo("city", "roots", "suffix") d33 = mytwo("cityst", "roots", "suffix") d34 = mytwo("inscompany", "roots", "suffix")...

...d26 = myone("inscompany", "roots") d27 = myone("state", "roots2") d28 = myone("city", "roots2") d29 = myone("cityst", "roots2") d30 = myone("inscompany", "roots2") d31 = mytwo("state", "roots", "suffix") d32 = mytwo("city", "roots", "suffix") d33 = mytwo("cityst", "roots", "suffix") d34 = mytwo("inscompany", "roots", "suffix")...

Hi There, i?m trying to controll PTZ-Cams trough Suse Linux 9.3. i have 2 Cams - a Sony D31 and a Canon VC-C1. So both where shipped with controlsoftware (Windows). The Software from Sony had no problem - i can control all i want .. Zoom Pan Tilt .. etc. Next i tried to connect the Canon Cam .. and after starting the software, it return a "Error initalizing COM1" A #WINEDEBU...

Hi, I have this bug when I activate java-6-jdk on Tomcat 5.5.26 in a Lenny Guest : Jul 31 21:24:15 tomcat01 kernel: 1 multicall(s) failed: cpu 3 Jul 31 21:24:15 tomcat01 kernel: call 1/1: op=14 arg=[b7f1a000] result=-22 Jul 31 21:24:15 tomcat01 kernel: ------------[ cut here ]------------ Jul 31 21:24:15 tomcat01 kernel: kernel BUG at arch/x86/xen/multicalls.c:103! Jul 31 21:24:15 tomcat01

Hi Mihail, > static DecodeStatus CheckNEONConstraint(const MCInst &Inst, unsigned Insn) [...] > ConstraintCheckMethod = "CheckNEONConstraint" In general I like the idea of an instruction-validation method. I think it could also potentially solve the SoftFail/UNPREDICTABLE issues that are looming (and partially resolved for decoding at present). However, I think that to cope

Hello all, I have problems with enabling support for SMBus on STABLE. My motherboard is ICH3 (82801CA). As suggested in LINT I added 3 lines to my kernel config: device smbus device ichsmb device smb But after compiling, installing and rebooting /dev/smb[01] are not available and no changes in kernel startup messages either. So I

Hello. Sometimes the constraints imposed on an instruction's encoding are too complex to be described in tablegen alone. In such cases a custom decoder method is implemented. This makes sense when the decoding itself is very complex, but it is wasteful to do it only when checking additional constraints. This is because: 1. a custom decoder method has to decode operands, set opcodes, etc. -

...tl; >> + uint64_t cval; >> + uint32_t type; >> +}; >> + >> +DECLARE_HVM_SAVE_TYPE(A15_TIMER, 3, struct hvm_hw_timer); >> + >> +struct hvm_hw_vfp >> +{ >> + uint64_t fpregs1[16]; /* {d0-d15} */ >> + uint64_t fpregs2[16]; /* {d16-d31} */ >> + uint32_t fpexc; >> + uint32_t fpscr; >> + /* VFP implementation specific state */ >> + uint32_t fpinst; >> + uint32_t fpinst2; >> +}; >> + >> +DECLARE_HVM_SAVE_TYPE(VFP, 4, struct hvm_hw_vfp); >> + >> +/* >> +...

...6(N1) d7(N1) d8(N1) d9(N1) d10(N1) d11(N1) d12(N1) d13(N1) > > d14(N1) d15(N1) d16(N1) d17(N2) d18(N1) d19(N1) d20(N1) . > > > > - RECORD TYPE 'B'. > > - DATA LIST LIST / i1(A1) d21(N1) d22(N1) d23(N1) d24(N1) d25(N1) > > d26(N1) d27(N1) d28(N1) d29(N1) d30(N1) d31(N1) d32(N1) d33(N1) > > d34(N1) d35(N1) d36(N1) d37(N1) d38(A37) d39(N1) d40(N1) . > > > > - RECORD TYPE 'C'. > > - DATA LIST LIST / i2(A1) d41(N1) d42(N1) d43(N1) d44(N1) d45(N1) > > d46(N1) d47(N1) d48(N1) d49(N1) d50(N1) d51(N1) d52(N1) d53(N1) > > d54...