search for: csb5

Hi! I''m doing load balancing for 5 dsl lines, each one with a dsl router attached to a linux machine ethernet plug. The problem is that I''m adding 15 more dsl lines, and I don''t have enough PCI slots in the linux machine to sum up 20 ethernet plugs (I already have 2 quad ethernet cards). So I''m considering connecting all dsl routers and the linux machine to a

...). My system is a Kontron cPCI-DT64 single board computer. The CD-ROM drive is an Adtron IC6C, has its own IDE controller and sits in another cPCI slot. System Details: System BIOS - PhoenixBIOS 4 Release 6.0, cPCI-DT64 BIOS 2.5 Adapter BIOS - Sil 0680 ATA/133 Controller BIOS 3.2.10 ServerWorks CSB5: IDE controller on PCI bus 00 dev 79 ServerWorks CSB5: chipset revision 147 CMD680: IDE controller on PCI bus 02 dev 70 CMD680: chipset revision 2 hda: FUJITSU MHT2060AT, ATA DISK drive hde: CD-224E, ATAPI CD/DVD-ROM drive I made another CD (with mkisofs 1.15a27) by replacing isolinux.bin with iso...

Hi! I''ve 5 DSL routers and a linux router in a switch. The linux router is doing NAT for a LAN network, but it freezes when I set up load balancing with this command: ip route add default proto static\ nexthop via 192.168.1.10 dev eth1\ nexthop via 192.168.1.20 dev eth1\ nexthop via 192.168.1.30 dev eth1\ nexthop via 192.168.1.40 dev eth1\ nexthop

...0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] Xen virtual console successfully installed as ttyS Event-channel device installed. Initialising Xen netif backend Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1 SvrWks CSB5: chipset revision 147 SvrWks CSB5: not 100% native mode: will probe irqs l ide0: BM-DMA at 0x0700-0x0707, BIOS settings: hda:pio, hdb:pio ide1: BM-DMA at 0x0708-0x070f, BIOS settings: hdc:DMA, hdd:DMA hdc: LG CD-ROM CRN-8245B, ATAPI CD/...

.../100/1000baseTX PHY> on miibus0 brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseTX, 1000baseTX-FDX, auto pci0: <base peripheral> at device 5.0 (no driver attached) isab0: <PCI-ISA bridge> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks CSB5 ATA100 controller> port 0x2000-0x200f,0-0x3,0-0x7,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xf5fc0000-0xf5fc0fff irq 11 at device 15.2 on pci0 usb0: OHCI version 1.0, legacy s...

I ran some iperf tests today and it looks like the etherbridge is the limiting factor on throughput. In the beforetime, I saw great throughput to the VMs; over 800 Mbps. With the bridge, the numbers are in the 400s somewhere. Is this the speed I can expect from the bridge? Is there some tuning I should try, or another way to get more bandwidth into the VMs? This is with xen-2.0, 2.4.27-xen0

Has anyone had successfully installed more then two digium wildcards in the same machine? I'm going for four. thanks Shoval Tomer, IT Manager, SofTov Advanced Systems, Ltd. Office: +972-3-9230686 ext. 179 Fax: +972-3-9216642 Mobile: +972-54-8000200

...:06.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 08) 00:0f.0 ISA bridge: Broadcom (formerly ServerWorks) OSB4 South Bridge (rev 50) 00:0f.1 IDE interface: Broadcom (formerly ServerWorks) OSB4 IDE Controller 00:0f.2 USB Controller: Broadcom (formerly ServerWorks) OSB4/CSB5 OHCI USB Controller (rev 04) 01:00.0 VGA compatible controller: ATI Technologies Inc Rage XL AGP 2X (rev 27) 02:01.0 RAID bus controller: LSI Logic / Symbios Logic MegaRAID (rev 01) NOTE: This is a dual-CPU board with only one CPU. When you throw in another P3 it gets too hot and locks up. #...

Hello everybody, After going through multiple posts on Internet and trying different things I can't seems get zaptel wcfxo loaded on the server correctly. I run dual P3 500 Mhz box. After reading README.udev I put a file 60-zaptel.rules /etc/udev/rules.d # Section for zaptel device KERNEL="zapctl", NAME="zap/ctl" KERNEL="zaptimer",

...gt; on pcib0 pci0: <unknown card> (vendor=0x1028, dev=0x000c) at 4.0 irq 2 pci0: <unknown card> (vendor=0x1028, dev=0x0008) at 4.1 irq 7 pci0: <unknown card> (vendor=0x1028, dev=0x000d) at 4.2 irq 10 pci0: <ATI Mach64-GR graphics accelerator> at 14.0 atapci0: <ServerWorks CSB5 ATA100 controller> port 0x8b0-0x8bf,0x8d8-0x8db,0x8d0-0x8d7,0x8c8-0x8cb,0x8c0-0x8c7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xfe100000-0xfe100fff irq 5 at device 15.2 on pci0 usb0: OHCI version 1.0,...

...roller: ATI Technologies Inc Rage XL (rev 27) > 00:08.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 08) > 00:0f.0 ISA bridge: ServerWorks OSB4 South Bridge (rev 50) > 00:0f.1 IDE interface: ServerWorks OSB4 IDE Controller > 00:0f.2 USB Controller: ServerWorks OSB4/CSB5 OHCI USB Controller (rev 04) > 01:02.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone] (rev > 34) > 01:03.0 Unknown mass storage controller: American Megatrends Inc. MegaRAID 428 > Ultra RAID Controller (rev 03) > 01:05.0 SCSI storage controller: LSI Logic / Symbios...

...lerator> at 3.0 irq 7 pci0: <unknown card> (vendor=0x0e11, dev=0xb203) at 5.0 irq 3 pci0: <unknown card> (vendor=0x0e11, dev=0xb204) at 5.2 irq 15 isab0: <PCI to ISA bridge (vendor=1166 device=0201)> at device 15.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <ServerWorks CSB5 ATA100 controller> port 0-0x3,0x2000-0x200f,0x374-0x377,0x170-0x177,0x3f4-0x3f7,0x1f0-0x1f7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 ohci0: <OHCI (generic) USB controller> mem 0xf5ef0000-0xf5ef0fff irq 7 at device 15.2 on pci0 usb0: OHCI vers...

...gt; on pcib0 pci0: <unknown card> (vendor=0x1028, dev=0x000c) at 4.0 irq 2 pci0: <unknown card> (vendor=0x1028, dev=0x0008) at 4.1 irq 7 pci0: <unknown card> (vendor=0x1028, dev=0x000d) at 4.2 irq 10 pci0: <ATI Mach64-GR graphics accelerator> at 14.0 atapci0: <ServerWorks CSB5 ATA100 controller> port 0x8b0-0x8bf,0x8d8-0x8db,0x8d0-0x8d7,0x8c8-0x8cb,0x8c0-0x8c7 at device 15.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 pci0: <OHCI USB controller> at 15.2 irq 5 isab0: <PCI to ISA bridge (vendor=1166 device=0225)> at device 15...

...d of 0x01. */ -static void __devinit quirk_transparent_bridge(struct pci_dev *dev) +static void quirk_transparent_bridge(struct pci_dev *dev) { dev->transparent = 1; } @@ -1066,7 +1066,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA /* * Serverworks CSB5 IDE does not fully support native mode */ -static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev) +static void quirk_svwks_csb5ide(struct pci_dev *pdev) { u8 prog; pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); @@ -1082,7 +1082,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERV...

...d of 0x01. */ -static void __devinit quirk_transparent_bridge(struct pci_dev *dev) +static void quirk_transparent_bridge(struct pci_dev *dev) { dev->transparent = 1; } @@ -1066,7 +1066,7 @@ DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SATA /* * Serverworks CSB5 IDE does not fully support native mode */ -static void __devinit quirk_svwks_csb5ide(struct pci_dev *pdev) +static void quirk_svwks_csb5ide(struct pci_dev *pdev) { u8 prog; pci_read_config_byte(pdev, PCI_CLASS_PROG, &prog); @@ -1082,7 +1082,7 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SERV...

Recent SUP. Installed on Dell PowerEdge 4600. Getting tons of: Sep 30 12:23:16 zige /kernel: bge0: gigabit link up Sep 30 12:23:46 zige last message repeated 98 times Also getting some TCP retransmits. This causes noticable delays in pretty much everything I do now. Not a problem prior to the SUP. I was on 4.8-STABLE before. When pulling/replacing cables, it went into a mode where it would