search for: conenct

Hi, all I am doing "prrof of concept" system. I will have two IP phones connected to Asterisk box. Box itself will have 1 PSTN conenction and one analog phone conenction. A basic minimal configuration. At the moment I am planning to use an old PII-350 with 128M of RAM I have lying around. I can not test anything yet, as I am waiting for phones to arrive, so question is will that be enough to demonstrate? Thanks, Rudolf

Hi, i always get error conenction refused when i try to start swat with redhat 8.0 i did all teh change in the servie file and xindet.d any guess thanks

Hello list, i have updated the fedora core 5 samba package yesterday. since then the existing users can not access the shares anymore, but new created users can. the log says "User <olduser> not in 'valid users'", but the old users are of course still there side by side with the new user. the update was from 3.0.14a to 3.0.23. i am using the 64bit package and selinux

[Redirected to the general samba list] One of the things which Samba provides is a facility to run a "preexec" script before allowing a user to connect to a directory, and refuse to make the conenction if the script returns a non-zero result. This can prevent someone from logging on twice, limit them to specific hours, from conencting to the wrong directory and so on. In addition, one can set "valid users" so that only the owner of a directory can connect to it. Of course,...

Is the Sipura 3000 the only way to interface a remote pstn line and connect incoming calls to Asterisk? I have a location connected by network that has a phone line, when the room is occupied I want the line ti ring there as normal, but when the employee is travelling I want the line to be conencted to a ATA that then feeds it as an incoming pstn line to the pbx located at my office so it can follow her. It sounds like the Sipura 3000 would be perfect, what else would do it? Chris Mason

...: Sending SSH2_MSG_KEX_DH_GEX_REQUEST. debug: Wait SSH2_MSG_KEX_DH_GEX_GROUP. debug: Got SSH2_MSG_KEX_DH_GEX_GROUP. debug: bits set: 1047/2049 debug: Sending SSH2_MSG_KEX_DH_GEX_INIT. debug: Wait SSH2_MSG_KEX_DH_GEX_REPLY. Connection closed by 10.1.1.1 debug: Calling cleanup 0x805efd0(0x0) And the conenction is dropped. The server says in the log: Feb 20 17:01:41 server sshd[5525]: fatal: xfree: NULL pointer given as argument and that's it. Any ideas? Protocol 1 works OK, so did protocol 2 with 2.3.0. -- Stanislav Malyshev, Zend Products Engineer stas at zend.com http://www.zend.com/ +972-3-...

hi, The prob is when we ring 2 channels simultaneously, only 1 channel is actually ringing. In our configuration, the Asterisk box is connected to an E1 channel bank, where 15 analog extensions are conencted to channelbank inturn. We tried following, Dial,Zap/g4/444&Zap/g4/448|20|t Heres the output, -- Executing Dial("IAX2[trunk10@trunk50]/1", "Zap/g4/444&Zap/g4/448|20|t") in new stack -- Called g4/444 -- Called g4/446 -- Zap/1-1 answered IAX2[trunk10@t...

...I have following questions 1. While the script is being executed are other connection requests to server waiting or are there services? 2. Is there a number parallel connections concept with rails? If yes how to configure it? 3. Should I make the script call as part of a new Thread to avoid other conenctions from waiting? Thanks, Sudhindra -- Posted via http://www.ruby-forum.com/.

...d qualify=yes (just so I can see ping times). trunk=yes is on globally, AND in each peer/friend definition. IAX2 SHOW PEERS shows a (T) next to each server, indicating that a trunk will be established. Servers on the same LAN segment seem to trunk OK. (IAX2 TRUNK DEBUG shows meaningful info). Conenctions where 1 server is behind a firewall works fine, but trunking does not seem to work. The only other difference is the codec. On the remote servers (the ones behind the firewalls), I'm running G729 (the Intel one). The LAN-based servers all talk to each other using G.711. Anyone have any...

...te: '01000' SQL Server Error: 2 [Microsoft][ODBC SQL Server Driver][Shared Memory]ConnectionOpen (Connect()). Connection failed: SQLState:'08001' SQL Server Error: 17 [Microsoft][ODBC SQL Server Driver][Shared Memory] SQL Server does not exist or access denied. So if isql lets me conenct and show tables etc. and "sqlconnect()" in foxpro brings up the dialogue. What is between those two to stop it? WINEDEBUG=+odbc32 is set, but I haven't seen anything helpful yet, unless I'm looking in the wrong place. Is there a more up-to-date set of instructions I overlooked...

yes, this is a crazy subject. I have 4 ADSL lines to the same provider, which even have the same gateway. Those lines are connected to the same machine (more crazyness: even connected to the same nic. it works fine, I swear). this machine will serve this conenction to a local net. so, I setup the ifaces correctly, everything works. I add balancing using this command: # ip route replace default nexthop dev ppp0 nexthop dev ppp1 nexthop dev ppp2 nexthop dev ppp3 I try this downloading a iso image using BT and checking with iptraf. the load gets balanc...

...client inside my LAN to a client on the INTERNET, the person receives the call and listen me perfectly, but i can't listen any audio from him, i read about the issue and it seems to be a problem of nating, keep in mind that this server is masquerading all my LAN ips, so i can share my internet conenction, so when i receive a call form the outside world in fact x-lite shows me that the call originate from my inside interface IP of the server, but this is the strange thing the packets that originate the call from the outside world arrive just fine but when i answer the call i can't hear any au...

...to have problems with large mailboxes. Then again, it had these same problems with other IMAP servers as well. * Thunderbird doesn't work at all. After some waiting, it bums out and reports: Unable to connect to your IMAP server. You may have exceeded the maximum number of conenctions to this server. If so, use the Advanced IMAP Server Settings dialog to reduce the number of cached connections. Note that it never even shows an authentication dialog, and the only thing I see in dovecot's log that relates to Thunderbirds attempt is: dovecot: Jul...

I have about a dozen SIP phones up and working, now I want to connect the asterisk box to our Fujitsu 9600 PBX. I currently have two dial-up servers conencted to the Fujitsu PBX that I built with mgetty/pppd and have the lines provisioned the same way as those dial-up server, ESF, B8ZS, and E&M wink start, so I have confidence in the guys who set up the PBX. I've built a loop back plug for T1 and looped it both directions, I can get the Digum...

...to the other) but its giving issues. Specificaly when one server tries to connect to the other it looks up the record and get the external IP address and therefor tries to connect via that address. So I''m trying to set up the following rule to direct the traffic correctly, as it cannot conenct directly using the external IP address. DNAT lan:10.1.1.2 lan:10.1.1.15 tcp smtp - 124.124.124.124 DNAT lan:10.1.1.15 lan:10.1.1.2 tcp smtp - 123.123.123.123 This (in my view) should route traffic from 10.1.1.2 directed to 124.124.124.124 to 10.1.1.15 and vis...

Hi, everyone, I installed the Xen3.1.0 based on Fedora8 and enter the Dom0 successfully. The kernel of dom0 is linux-2.6.18-xen0. But the Xorg could not start in the Dom0. When I use the "startx" command to start the X server, the error information is following: ......... (==) Using config file: "etc/X11/xorg.conf" (II) Module already built-in (II) Module already built-in

...ar R Beginners, Experts and Users, I already asked this question on the R-sig-DB mailing list, but sadly didn't got a reply :-( . Keeping fingers crossed that I have more luck on the main R mailinglist :) . I'm trying to connect to a MySQl database via Gnu R using the RODBC interface. The conenction workes but I get an empty result string. Gnu R and the MySql DB are running on a 64 bit server. I installed version 5.1 of the mysql ODBC interface files [1]. My unixODBC setup file is given in [2], the setup was tested with "isql" and works [3]. If I connect from GNU R to the database...

Hello, On Mon, Aug 3, 2020 at 12:08 PM Daniel P. Berrangé <berrange@redhat.com> wrote: > On Sat, Aug 01, 2020 at 04:51:57PM +0300, David K. Kahurani wrote: > > Hello > > > > On a probably a few days old build of libvirt, it is not possible to > connect to my local system. > > > > The command used is: > > > > $virsh -c xen:///system >

...process hangs, it appears as though the process itself is tied up in some sort of loop or something and becomes un-responsive; the client tries to auto-reconnect and does so spawning a new 'duplicate' session to the first. Problem herein is two fold; first, the smbd process they origionally conencted with is still running, and still maintains the file locks for the file they are accessing, secondly, the smbd process maintains 100% cpu time (as the O/S allows anyhow, not lagging the servers thankfully). So, we keep running into an issue (usually with Microsoft Excel or Word documents), wherei...

Yo All! I understand why we do not have sftp in openssh, but it would be nice if we could make it so that when an SSH.COM scp2 client makes a connection to an OpenSSH V2 daemon that it does not hang.... Any ideas or do I need to dig a bit on this? Here is what the sshd says when I conenct to it from scp2: debug: session_open: session 0: link with channel 0 debug: confirm session debug: callback start debug: session_by_channel: session 0 channel 0 debug: session_input_channel_req: session 0 channel 0 request subsystem reply 1 subsystem request for sftp subsystem request for sftp fai...