Yuming fang
2008-Sep-03 06:50 UTC
[Xen-users] Unable to start Xorg in dom0 (Linux kernel 6.1.18)
Hi, everyone, I installed the Xen3.1.0 based on Fedora8 and enter the Dom0 successfully. The kernel of dom0 is linux-2.6.18-xen0. But the Xorg could not start in the Dom0. When I use the "startx" command to start the X server, the error information is following: ......... (==) Using config file: "etc/X11/xorg.conf" (II) Module already built-in (II) Module already built-in (II) Module already built-in (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory) (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? (EE) intel(0): Couldn''t allocate video memory Fatal server error: AddScreen/ScreenInit failed for driver 0 giveing up. xinit: Connection refused (errno 111): unable to connect to X server xinit: No such process (error 3): Server error. Did anyone face this problem when starting the Xserver? The hardware is Intel Corporation 82946GZ/GL. The system is based on linux-2.6.18-xen0. Xserver is X Window System Version 1.3.0 Release Date: 19 April 2007. I would appreciate it if anyone could give me some help. Yuming _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Tej
2008-Sep-03 19:06 UTC
Re: [Xen-users] Unable to start Xorg in dom0 (Linux kernel 6.1.18)
On Wed, Sep 3, 2008 at 12:20 PM, Yuming fang <fangyuming.leo@gmail.com> wrote:> Hi, everyone, > > I installed the Xen3.1.0 based on Fedora8 and enter the Dom0 successfully. > The kernel of dom0 is linux-2.6.18-xen0. But the Xorg could not start in > the Dom0. When I use the "startx" command to start the X server, the error > information is following: > > ......... > (==) Using config file: "etc/X11/xorg.conf" > (II) Module already built-in > (II) Module already built-in > (II) Module already built-in > (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory) > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too low? > (EE) intel(0): Couldn''t allocate video memory > > Fatal server error: > AddScreen/ScreenInit failed for driver 0Try to reconfigure the xserver again using: "sudo dpkg-reconfigure xserver-xorg" HTH thanks -tej> > giveing up. > xinit: Connection refused (errno 111): unable to connect to X server > xinit: No such process (error 3): Server error. > > Did anyone face this problem when starting the Xserver? The hardware is > Intel Corporation 82946GZ/GL. The system is based on linux-2.6.18-xen0. > Xserver is X Window System Version 1.3.0 Release Date: 19 April 2007. > > I would appreciate it if anyone could give me some help. > > Yuming > > > > _______________________________________________ > Xen-users mailing list > Xen-users@lists.xensource.com > http://lists.xensource.com/xen-users >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Yuming fang
2008-Sep-04 01:38 UTC
Re: [Xen-users] Unable to start Xorg in dom0 (Linux kernel 6.1.18)
2008/9/4 Tej <bewith.tej@gmail.com>> On Wed, Sep 3, 2008 at 12:20 PM, Yuming fang <fangyuming.leo@gmail.com> > wrote: > > Hi, everyone, > > > > I installed the Xen3.1.0 based on Fedora8 and enter the Dom0 > successfully. > > The kernel of dom0 is linux-2.6.18-xen0. But the Xorg could not start in > > the Dom0. When I use the "startx" command to start the X server, the > error > > information is following: > > > > ......... > > (==) Using config file: "etc/X11/xorg.conf" > > (II) Module already built-in > > (II) Module already built-in > > (II) Module already built-in > > (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory) > > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too > low? > > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too > low? > > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too > low? > > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too > low? > > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too > low? > > (EE) intel(0): Couldn''t allocate video memory > > > > Fatal server error: > > AddScreen/ScreenInit failed for driver 0 > > Try to reconfigure the xserver again using: > "sudo dpkg-reconfigure xserver-xorg" > > HTH > > thanks > -tej >I enter the command "sudo dpkg-reconfigure xserver-xorg", but it could not run. The error information is: sudo: dpkg-reconfigure: command not found audit_log_user_command(): Conenction refused You have new mail in /var/spool/mail/root My system is linux-2.6.18-Xen0, the orginal system is Fedora8. Is there this command in the system? thanks. Yuming> > giveing up. > xinit: Connection refused (errno 111): unable to connect to X server > xinit: No such process (error 3): Server error. > > Did anyone face this problem when starting the Xserver? The hardware is > Intel Corporation 82946GZ/GL. The system is based on linux-2.6.18-xen0. > Xserver is X Window System Version 1.3.0 Release Date: 19 April 2007. > > I would appreciate it if anyone could give me some help. > > Yuming > > >> > _______________________________________________ > > Xen-users mailing list > > Xen-users@lists.xensource.com > > http://lists.xensource.com/xen-users > > >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Tej
2008-Sep-04 06:01 UTC
Re: [Xen-users] Unable to start Xorg in dom0 (Linux kernel 6.1.18)
On 9/4/08, Yuming fang <fangyuming.leo@gmail.com> wrote:> 2008/9/4 Tej <bewith.tej@gmail.com> > >> On Wed, Sep 3, 2008 at 12:20 PM, Yuming fang <fangyuming.leo@gmail.com> >> wrote: >> > Hi, everyone, >> > >> > I installed the Xen3.1.0 based on Fedora8 and enter the Dom0 >> successfully. >> > The kernel of dom0 is linux-2.6.18-xen0. But the Xorg could not start >> > in >> > the Dom0. When I use the "startx" command to start the X server, the >> error >> > information is following: >> > >> > ......... >> > (==) Using config file: "etc/X11/xorg.conf" >> > (II) Module already built-in >> > (II) Module already built-in >> > (II) Module already built-in >> > (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory) >> > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too >> low? >> > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too >> low? >> > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too >> low? >> > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too >> low? >> > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set too >> low? >> > (EE) intel(0): Couldn''t allocate video memory >> > >> > Fatal server error: >> > AddScreen/ScreenInit failed for driver 0 >> >> Try to reconfigure the xserver again using: >> "sudo dpkg-reconfigure xserver-xorg" >> >> HTH >> >> thanks >> -tej >> > > > I enter the command "sudo dpkg-reconfigure xserver-xorg", but it could not > run. > The error information is: > sudo: dpkg-reconfigure: command not found > audit_log_user_command(): Conenction refused > You have new mail in /var/spool/mail/rootsorry it is debian specific For xserver reconfiguration in fedora use: xorgcfg --textmode or else X -config and fill up the details HTH thanks -tej> > My system is linux-2.6.18-Xen0, the orginal system is Fedora8. Is there this > command in the system? > thanks. > > Yuming > >> >> giveing up. >> xinit: Connection refused (errno 111): unable to connect to X server >> xinit: No such process (error 3): Server error. >> >> Did anyone face this problem when starting the Xserver? The hardware is >> Intel Corporation 82946GZ/GL. The system is based on linux-2.6.18-xen0. >> Xserver is X Window System Version 1.3.0 Release Date: 19 April 2007. >> >> I would appreciate it if anyone could give me some help. >> >> Yuming >> >> >> > >> > _______________________________________________ >> > Xen-users mailing list >> > Xen-users@lists.xensource.com >> > http://lists.xensource.com/xen-users >> > >> >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Yuming fang
2008-Sep-04 08:26 UTC
Re: [Xen-users] Unable to start Xorg in dom0 (Linux kernel 6.1.18)
2008/9/4 Tej <bewith.tej@gmail.com>> On 9/4/08, Yuming fang <fangyuming.leo@gmail.com> wrote: > > 2008/9/4 Tej <bewith.tej@gmail.com> > > > >> On Wed, Sep 3, 2008 at 12:20 PM, Yuming fang <fangyuming.leo@gmail.com> > >> wrote: > >> > Hi, everyone, > >> > > >> > I installed the Xen3.1.0 based on Fedora8 and enter the Dom0 > >> successfully. > >> > The kernel of dom0 is linux-2.6.18-xen0. But the Xorg could not start > >> > in > >> > the Dom0. When I use the "startx" command to start the X server, the > >> error > >> > information is following: > >> > > >> > ......... > >> > (==) Using config file: "etc/X11/xorg.conf" > >> > (II) Module already built-in > >> > (II) Module already built-in > >> > (II) Module already built-in > >> > (EE) GARTInit: Unable to open /dev/agpgart (No such file or directory) > >> > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set > too > >> low? > >> > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set > too > >> low? > >> > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set > too > >> low? > >> > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set > too > >> low? > >> > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set > too > >> low? > >> > (EE) intel(0): Couldn''t allocate video memory > >> > > >> > Fatal server error: > >> > AddScreen/ScreenInit failed for driver 0 > >> > >> Try to reconfigure the xserver again using: > >> "sudo dpkg-reconfigure xserver-xorg" > >> > >> HTH > >> > >> thanks > >> -tej > >> > > > > > > I enter the command "sudo dpkg-reconfigure xserver-xorg", but it could > not > > run. > > The error information is: > > sudo: dpkg-reconfigure: command not found > > audit_log_user_command(): Conenction refused > > You have new mail in /var/spool/mail/root > > sorry it is debian specific > > For xserver reconfiguration in fedora use: > xorgcfg --textmode or else X -config and fill up the details > > HTH > > thanks > -tej >The command "X -config" is ok. But how should I config it? Which parameters should I config? Thanks. Yuming> > > > > > My system is linux-2.6.18-Xen0, the orginal system is Fedora8. Is there > this > > command in the system? > > thanks. > > > > Yuming > > > >> > >> giveing up. > >> xinit: Connection refused (errno 111): unable to connect to X server > >> xinit: No such process (error 3): Server error. > >> > >> Did anyone face this problem when starting the Xserver? The hardware is > >> Intel Corporation 82946GZ/GL. The system is based on linux-2.6.18-xen0. > >> Xserver is X Window System Version 1.3.0 Release Date: 19 April 2007. > >> > >> I would appreciate it if anyone could give me some help. > >> > >> Yuming > >> > >> > >> > > > >> > _______________________________________________ > >> > Xen-users mailing list > >> > Xen-users@lists.xensource.com > >> > http://lists.xensource.com/xen-users > >> > > >> > > >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Yuming fang
2008-Sep-12 08:42 UTC
Re: [Xen-users] Unable to start Xorg in dom0 (Linux kernel 6.1.18)
I solved this problem. It was the problem of xorg.conf. The orginal file of xorg.conf is: Section "Device" Identifier "Videocard0" Driver "Intel" EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection I modified the xorg.conf as follows: Section "Device" Identifier "Generic Video Card" Driver "vesa" EndSection Section "Screen" Identifier "Screen0" Device "Generic Video Card" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection And then the X worked. It seems the XServer of Linux2.6.18.8-xen0 could work when using the vesa driver, but could not work when using the default configuration. Although I could start the X, I could not understand the cause. Yuming 2008/9/4 Yuming fang <fangyuming.leo@gmail.com>> > > 2008/9/4 Tej <bewith.tej@gmail.com> > >> On 9/4/08, Yuming fang <fangyuming.leo@gmail.com> wrote: >> > 2008/9/4 Tej <bewith.tej@gmail.com> >> > >> >> On Wed, Sep 3, 2008 at 12:20 PM, Yuming fang <fangyuming.leo@gmail.com >> > >> >> wrote: >> >> > Hi, everyone, >> >> > >> >> > I installed the Xen3.1.0 based on Fedora8 and enter the Dom0 >> >> successfully. >> >> > The kernel of dom0 is linux-2.6.18-xen0. But the Xorg could not >> start >> >> > in >> >> > the Dom0. When I use the "startx" command to start the X server, the >> >> error >> >> > information is following: >> >> > >> >> > ......... >> >> > (==) Using config file: "etc/X11/xorg.conf" >> >> > (II) Module already built-in >> >> > (II) Module already built-in >> >> > (II) Module already built-in >> >> > (EE) GARTInit: Unable to open /dev/agpgart (No such file or >> directory) >> >> > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set >> too >> >> low? >> >> > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set >> too >> >> low? >> >> > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set >> too >> >> low? >> >> > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set >> too >> >> low? >> >> > (EE) intel(0): Failed to allocate framebuffer. Is your VideoRAM set >> too >> >> low? >> >> > (EE) intel(0): Couldn''t allocate video memory >> >> > >> >> > Fatal server error: >> >> > AddScreen/ScreenInit failed for driver 0 >> >> >> >> Try to reconfigure the xserver again using: >> >> "sudo dpkg-reconfigure xserver-xorg" >> >> >> >> HTH >> >> >> >> thanks >> >> -tej >> >> >> > >> > >> > I enter the command "sudo dpkg-reconfigure xserver-xorg", but it could >> not >> > run. >> > The error information is: >> > sudo: dpkg-reconfigure: command not found >> > audit_log_user_command(): Conenction refused >> > You have new mail in /var/spool/mail/root >> >> sorry it is debian specific >> >> For xserver reconfiguration in fedora use: >> xorgcfg --textmode or else X -config and fill up the details >> >> HTH >> >> thanks >> -tej >> > > > The command "X -config" is ok. But how should I config it? Which parameters > should I config? > Thanks. > Yuming > > > > >> >> >> > >> > My system is linux-2.6.18-Xen0, the orginal system is Fedora8. Is there >> this >> > command in the system? >> > thanks. >> > >> > Yuming >> > >> >> >> >> giveing up. >> >> xinit: Connection refused (errno 111): unable to connect to X server >> >> xinit: No such process (error 3): Server error. >> >> >> >> Did anyone face this problem when starting the Xserver? The hardware is >> >> Intel Corporation 82946GZ/GL. The system is based on linux-2.6.18-xen0. >> >> Xserver is X Window System Version 1.3.0 Release Date: 19 April 2007. >> >> >> >> I would appreciate it if anyone could give me some help. >> >> >> >> Yuming >> >> >> >> >> >> >> > >> >> > _______________________________________________ >> >> > Xen-users mailing list >> >> > Xen-users@lists.xensource.com >> >> > http://lists.xensource.com/xen-users >> >> > >> >> >> > >> > >_______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users
Seemingly Similar Threads
- How to debug Xen and Dom0 driver?
- Tools to take a kernel crash dump.
- Attach Floppy drive to Windows XP domU
- Xen GCOV Patches for latest Xen Unbstable and linux 2.6.18.8 kernel(32/64bit)
- Xen GCOV Patches for latest Xen Unbstable and linux 2.6.18.8 kernel(32/64bit)