search for: conect

Hi all, i''m new at LARTC, and after reading the docs I found no solution to my problem ... On one side I have eth0 conected to the LAN, on the other side I have eth1 conected to a switch and to 3 DSL routers with 3 diferent providers, and also eth2 conected to a cisco 2600 conected to a LDMS line. I have readed the larct docs about multihomed conections to internet, but I''m been unable to setup the routes...

...have a problem with the shorewall configuration. Let''s me tell you. I have installed shorewall 2.0.4 into a machine with 2.6.8 kernel. This machine works like a software-router: it has 2 netcard eth0 goes to the local network 192.168.0.0/24 eth1 is an interface for ppp0 (there is an ADSL conected) I have defined the Network Zones (net, loc); The Network Interfaces (ppp+ -> net and eth0 -> loc); The Firewall rules: ACCEPT Zone Net to Firewall (TCP) http,https,ftp,sftp,smtp,pop3,ssh ACCEPT Zone Loc to Firewall (TCP) http,https,ftp,sftp,smtp,pop3,ssh And the masquerading: ppp+...

Hello people. My name is Rub?n. Firts, excuse me for my bad english. I run Debian 6.0.6, kernel 2.6.32-5-amd64 in my machine. I bought a ISB Sola basic UPS, model Micro SR inet, with usb conection. I Configure the nut.conf file in standalone mode and I install de isbmex driver. The ups.conf: [ISB_sola-basic] driver = isbmex port = auto With de command upsdrvctl start the response is: Network UPS Tools - UPS driver controller 2.4.3 Network UPS Tools - ISBMEX UPS driver 0...

Regards I am installing NUT for the UPS Skate UPS-2200D, the UPS have conection with USB to PC and i have problems to configure nut the ups is conected and Linux report this config Aug 19 23:34:56 dakota kernel: [22393.099595] usb 2-2: new low speed USB device using uhci_hcd and address 7 Aug 19 23:35:06 dakota kernel: [22403.186326] usb 2-2: Product: MEC0002 Aug 19 23:35:...

Hello all, I am trying to make a little bit more complex QoS/Shapping form and I need to shape a PPPoE conection that I serve to my clients. So this is the scope: client connects using pppoe so it gets an IP address (from pppoe pool) and open an interface into my linux box interface for this client is ppp0 client has got an ip 1.1.1.2/32 and it is poiting to pppoe-server 1.1.1.1 So, if i want to sh...

Hi I'm a new user of linux and I have Fedora 7. I install wine and set up some applications that need to be able to conect to the net. The conections works fine with programs in linux and I try to follow the tips from the wine website but it doesn't work. can anybody help me out? thank you wine-users-request at winehq.org escribi?: Welcome to the wine-users at winehq.org mailing list! To post to this list, send y...

Hi all, i have a problem with 2 peers conecting to an asterisk machine, both are conected behind nat without any port mapping in the router, and the * is conected behind other nat with the port 4569 mapped to it address, the problem is: when a peer register to the asterisk the other cant register and viceversa, only gets registration the fir...

Hi everybody, Someone know how can i work with a mysql db that does''nt have persistent conections? thanks -- _________ Noel R. Morais

...it can't get users from AD. System boots and wbinfo says that there is no users or that there is only 10 users (in AD I have about 1100). I think that this is problem with timeout, because sometimes it works OK. Sometimes linux reboot helps... And simetimes my dhcp on windows says: ,,no conection to AD''. Mayby my AD has too long time to response? HELP! Please... I don't know what to do. Example: root@komp203l:~# wbinfo -u | wc -l 17 [ restart ] root@komp203l:~# wbinfo -u | wc -l 1138 -- Przemys?aw Adam ?miejek tel. GSM: +48 887-857-555

...v.conf # Generated by NetworkManager search gtm.gob.cu nameserver 192.168.41.17 [root at pgtm mail]# cat /etc/sysconfig/network NETWORKING=yes HOSTNAME=pgtm.gtm.gob.cu GATEWAY=192.168.41.1 Someone that happend something like this, or some place for where keep looking to try to fix this loose of conection? Thank and sorry for my horryble English. Rommel Rodriguez Toirac rommelrt at nauta.cu

...lv.conf # Generated by NetworkManager search gtm.gob.cu nameserver 192.168.41.17 [root at pgtm mail]# cat /etc/sysconfig/network NETWORKING=yes HOSTNAME=pgtm.gtm.gob.cu GATEWAY=192.168.41.1 Someone that happend something like this, or some place for where keep looking to try to fix this loose of conection? Thank and sorry for my horryble English. Rommel Rodriguez Toirac rommelrt at nauta.cu _______________________________________________ CentOS mailing list CentOS at centos.org https://lists.centos.org/mailman/listinfo/centos

Hi, Digium's E400P has RJ45 conector and my E1 link has BNC concetor. Could someone tell me the cable pinouts to make this conection? thanks Eduardo

On 23/02/17 08:27, Rommel Rodriguez Toirac wrote: > The solution was another IP address to this network device and then > everything work fine. > Why this happend? How I can erase the link beteewn MAC 00:1D:09:FF:44:4B and IP 192.168.41.4? Where can be stored this link? > Right now in the network is not assignet the IP address 192.168.41.4 to no one device (printserver, switch,

I have a client which is willing to connect * with a siemens hicon PBX. Any experiences that you wish to share, including FX, ISDN or E1 connectivity issues? PauloHM -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030707/dfb33d1f/attachment.htm

Hello, I have asterisk setup with Broadvoice. It works great as PBX and Outgoing calling server for all local clients withing 192.168.1.0 network. My asterisk is running over NAT. I use linksys router. Now, I am trying to connect from outside to my asterisk server. I use Diax as iax client. For some reason I cannot connect to my server from outside. On my router I forward those ports to my

Hello, i have Cisco Unified Communications Manager with 10 ip phone,i dont buy license IVR of Cisco Unified Communications Manager. Can i use feature IVR on Asterisk connect with Cisco Unified Communications Manager. Sorry my English.Thank you. -------------- next part -------------- An HTML attachment was scrubbed... URL:

i have a client application building power builder 11.5, i want connect with a server sql2008 I cant make this connection, i need help please... I have other application building power builder 9 and no have problem connection with sql2000 because use a driver odbc old

I'm trying to set up my ldap directory to use kerberos passwords. I have compiled openldap with --with-kpasswd, added the principal ldap/iceage.sg.org.br@SG.ORG.BR to kerberos. Also, I have prepared the user entries in LDAP with these fields (in addition to other ones): objectClass: krb5Principal krb5PrincipalName: diego@SG.ORG.BR cn: Diego Lima userPassword: {KERBEROS}diego@SG.ORG.BR I

Hi to all here is my problem i have one very simple share [files] here is the permissions of directory fileserver data # ls /home/samba/data/ -la total 16 drwsrws--x 4 alan acct 4096 Apr 4 04:58 . drwxr-xr-x 3 alan users 4096 Apr 4 04:55 .. drwsrws-wx 2 alan acct 4096 Apr 4 04:58 alan drwsrws-wx 2 ldbl acct 4096 Apr 4 04:58 ldbl Here is samba version fileserver data # smbd -V Version 3.0.24