search for: comgate

Would be nice to do both (type 2 and 3 I believe in Oftel terms), but I'd accept just our DDI if that was all I could get. Steve -----Original Message----- From: Storer, Darren [mailto:starusers@comgate.tv] Sent: 01 July 2004 09:35 To: asterisk-users@lists.digium.com Subject: RE: [Asterisk-Users] Providing Telewest in the UK with per extension outbound callerID Hi Steve, SH> Is anybody in the UK using Telewest as a PRI Telco provider? SH> Are you sending them caller ID? Just a...

Skipped content of type multipart/alternative

Darren, yes, I'd be happy to help. I'll contact you off list to sort out the arrangements. I should warn you that it may be a wasted journey for you, as I really dont know if it will exhibit the problem. Tim. "Storer, Darren" <starusers@comgate.tv> wrote: __________ >Hi Tim, > >TP> So it _may_ not be a problem for me as NTL is a patchwork >TP> of smaller telcos, my area (Manchester) may be more up to >TP> date. >TP> Anyone know an easy way to tell what I've got ? >TP> (or will I have to ask NTL -...

Hi All, This is our 2nd E1 client that we try to use crc4 either with the e100p or with the e405p without luck. After some trials, we ask the telco to switch off crc4 on their side and everything works flawlessly. Is there anything in the crc4 calculation that may be broken? We took a look at wct1xxx.c and wct4xx.c but there doesn't seem to be much there to be fixed (apparently the crc4

Hi, ? I'm trying to figure out what the issue is splicing Asterisk between our Telewest PRI and a GDK-186 with a PRI card. ? We're using the Digium TE405P ? Our telco provider is Telewest, and Telco directly into switch is fine. ? When I splice Asterisk in, I can make and receive calls from Asterisk extensions, I can make outbound calls from the GDK, but inbound calls do not seem to pass

Hello, Has someone know a good call generator for asterisk including SIP protocol (freeware if possible)? I need to stress a plateform and I don't find any. Thanks by advance.

Hi- Perhaps someone with an E100P in hand can answer this: I just received an E100P from Digium (I normally buy quad boards) I noticed that the circuit board says "T100P" on it, and I assume that the T100P and E100P both use the same circuit board. Can someone please confirm that their E100P says "T100P" on the artwork? Thanks Scott Scott M. Stingel Emerging Voice

hi can someone recommend a book about ISDN and SS7? I've been hacking asterisk for a while, but it'd be good to get some better background within things... thanks roy

Hello, I just wanted to know if any of you has successfully (or know about) installed the Dialogic 4xFXs ISA CARD D/41 ESC? Does it work with *?, if so, how is the driver called? Thanks a lot for your comments. Alejandro Acosta,-

hi some time ago, I asked the list of a good book for learning ISDN and SS7. I don't need to know how to write a channel driver or something; I just want to know more about the possibilities and what's really sent back and forth. I was told the book "ISDN and SS7: Architectures for Digital Signaling Networks" by Uyless Black (ISBN 0132591936) was a good choice, but this

Hi, I work for an ISP/CLEC, and we have developed our own OSS (Operations Support System), which handles all billing, sales, provisioning, and support issues. When it was originally being designed, the idea was to integrate it with Asterisk. Other than Caller-ID information (so that past trouble tickets, and billing issues can be brought up for the agent), how else would the Asterisk community

I've just managed to get hold of a cisco 7940, which looks nice but I'm unable to make it actually do anthing...! All the online manuals say things like "see your network administrator" which isn't a whole lot of use. First thing I think I need to do is work out how to set the TFTP server IP as it's using the wrong one (it's ignoring the setting in the DHCP server).

Hi- I have an upcoming application that requires use of PRI channels that are primarily used for high-volume incoming traffic, but that are to be used for outbound calling as well. Of course, one option is to have dedicated outbound channels reserved, but this is an inefficient use of channel resources. Normally PBX's are designed to have the CPE yield to an incoming call if a particular

Hi, Is anybody in the UK using Telewest as a PRI Telco provider? Are you sending them caller ID? I've been told by Telewest that:- 1. Oftel doesn't allow them to accept caller ID (this is rubbish, and I replied pointing out where in the link to Oftel that they sent me it was stated. We need Type 2 caller ID) 2. Telewest can't do this. (this is rubbish, I'm certain

I've googled / voip-info'd / searched until my eyes are blurry, but couldn't see the info I was looking for. I've turned here for help! Asterisk CVS head (9/7/04) Fedora Core 2 (updated to 2.6.6 kernel) DE405P (jumpers set to E1) I want to put asterisk in the middle of our current pbx (Meridian Option11) Currently the meridian has a 2MB pri EuroISDN card linked via a rj-45 into

How often do you guys see Event 6 and 8 on your PRI? (aka "HDLC Abort" and "HDLC Bad FCS") Is this normal? I would think not. bkw

Hello all, I really checked voip-info.org but it still seems to be not very easy and I just hope that there is anybody with a simular config. We have one PRI (euroisdn with 30 channels) coming from the DTAG. The second PRI should be connected to a Siemens Hicom 150E Pro Office PBX (was cheaper than a channel bank :-) Carrier ----S2M------ * -----S2M------Siemens | |

Hi I am in the UK and am looking for a device that will allow me to connect two sim cards (read wireless lines) to either the port on the back of my fritz card or any other connection direct to the PC that provides a usable telephony interface. I will even plug two devices into a windows box and have that do ISDN to ISDN if required. All I want is two GSM lines that look like voice modems to

Hi all, Has anyone got any experience with hooking Asterisk up with a Siemens EWSD 13 switch over a E1/PRI ? We're located in Belgium (Europe) and one of our telecom partners uses this switch. We connected one of our TE410P ports with their switch, but the status light on the TE410P card keeps blinking red. On their side they are getting a DSA (distance service alarm) error, so this

Does anyone know of a device that will take an SS7 link and convert it to a PRI? -- respectfully, Joseph - (606) 477-2355 x140 ------=============