search for: clarkconnect

Has anyone tried installing Asterisk on ClarkConnect? It looks like ClarkConnect runs on RHEL so it should work if they haven't modified it too much. It appears that ClarkConnect is working on adding Asterisk and integrating it into their GUI but until then I'd also be interested in trying to use FreePBX. Anyone?

...`````````````````` nmblookup -A 192.168.1.41 added interface ip=127.0.0.1 bcast=127.255.255.255 nmask=255.0.0.0 added interface ip=192.168.1.1 bcast=192.168.1.255 nmask=255.255.255.0 added interface ip=192.168.1.41 bcast=192.168.1.255 nmask=255.255.255.0 Looking up status of 192.168.1.41 CLARKCONNECT <00> - H <ACTIVE> CLARKCONNECT <03> - H <ACTIVE> CLARKCONNECT <20> - H <ACTIVE> ..__MSBROWSE__. <01> - <GROUP> H <ACTIVE> ENTERPRISE <1d> - H <ACTIVE>...

Hi Harry, Has much has I like Centos and RH for big sophisticated setup, it would not be my first choice for your project. For 25 systems and if you want this done without spending to much time, Clarkconnect would by my first choice for server side OS (#2 would be SME). For me CentOS x64 is #1 choice for enterprise (+500 users with Terabytes of storage ) sever solution. If you have little experience configuring a RH server, get ready to spend lots of time getting everything going as nicely as Clarkc...

Dear list, I am facing really a mysterious problem with samba. I am using clarkconnect server where samba-3.0.25b-1.1.cc is installed. I have created some samba users and windows XP user can share their samba files and folders without any problem. But the problem which happened here third time is auto deletion of files and folders !!!!!!!!!!!!!!!!!!!!!!!!!! An user ( FROM XP) simp...

...and all the client machines as thin clients c) Use CentOS as Server and Ubuntu as client OS d) Use RHEL on the server ( NO RHEL NO CENTOS) e) Use SME from Contribs.org for server and ubuntu for clients f) Use Scientific Linux (binary compatibility with RHEL) for Server g) Clarkconnect for server side and Ubuntu or FC on client side h) Use IPcop as firewall Although ClarkConnect, SME are based on RHEL, I have decided not to go on that path because of lack of large community behind them + Vendor Lock-In With K12ltsp- sounds very nice but I don't have a large and...

...to the future, I >>>> am looking for future distro of choice. >>> >>> A little mentioned choice would be openSUSE, which is direction I am taking. >> >> I do not like system where configuration app can overwrite manualy set >> config. I started with ClarkConnect in 2005-2006 and to route public >> subnet into my network I had to delete last iptables command then add my >> own, but only after config system did it's own iptables commands. I had >> to learn iptables before any other Linux commands and although I >> mastered it, it...

Hi Shakeel, I had the same problem building app_swift (1.6..) myself and searched the web far-and-wide for a solution. I eventually contacted Darren Sessions -- who was maintaining that plug-in -- about a month ago. He was involved in another project and said he might be able get to it after a few weeks. But, since then, his website http://www.darrensessions.com/ has gone out of comission. I

Hi, I have a question conercing wondershaper. I''m using the Clarkconnect linux distribution for my linux router and I tried to use wondershaper. On start up of wshaper, there are no errors or any other problems but I''m not sure if it''s running correctly. Only one qdisc / one class is used and when I start an uplink ftp transfer, my ping time is growin...

ClarkConnect Home 3.2 eth0 - WAN - inet - ip:192.168.1.2 gw:192.168.1.1 (connected to my www.woosh.co.nz gatway) wlan - WAN - private community wireless networt - ip:10.252.16.16 gw:10.252.16.1 eth1 - LAN - ip:192.168.2.1 # route add -net 10.0.0.0 netmask 255.0.0.0 gw 10.252.16.1 [root@bowenvale etc]# rou...

I'm a linux newbie and having some trouble with NUT, can anyone assist? I've read the FAQ and various articles online by Peter Sellinger and others thoroughly. OS is ClarkConnect 4.2, which is based on CentOS4/RHEL 4. UPS is an APC SmartUPS 1500 (USB). Correct driver is believed to be usbhid-ups. No RPM for my OS was available past 2.0, so I built from source using NUT 2.2. I think this all worked OK, did not see anything suspicious. (But again, compiling on linux is al...

I have purchased a used Compaq DL360 which I was going to use as a proxy server. Presently, we are using a cheap box with ipcop which is working fine but it didn't have much RAM (64MB), etc. This new box we will want to run squid and perhaps dansguardian for filtering (this is a non-profit company) and I'm wondering if I should just put ipcop on it or would it be smarter/better to install

Is there a recommended OS that Asterisk should be used with? I have been trying to get Asterisk running on Red Hat 9.0 with little success. Thanks! Michael -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20030922/d00398f7/attachment.htm

Hi all, I'm looking for a (preferably free) alternative to SME / Clark Connect. I basically need the following: - firewall - nat - VPN - bandwidth limiting / monitoring - email (SMTP / POP3 / IMAP) & groupware - file & printer sharing - RAID support - if possible fail-over / high availability support. I need to support about 15 - 30 (some part time) students, so I would like to keep

Hi, I am trying to virtualize a few boxes including my Clarkconnect firewall. My plan is to use the PCI pass through to pass the WAN interface to CC running on DomU. Since my ISP provides me with two IPs I would like to add another virtual server bridged to the NIC running on CC. Can anyone offer some advice on how I can do this? I don''t want the bridge...

Hi everyone, i need some advice, i have 3 offices with 4 telephone line in each using a normal telephone system( rather old systems )all connected via a clarkconnect vpn (broadband). so i have been looking at asterisk and like all the features so i was wondering if i could get all the telephone calls to come to one office and then distribute them as needed such as press 1 for office ABC and press 2 for office XYZ and so on. I also wanted to know do i have to...

We had a Samba Version 3.0.23c-4 workgroup server on clarkconnect 4.1 (had to hunt for kbr5-workstation!) with a smbpasswd back-end that was accessed from machines joined into an Active Directory Windows 2000 domain. We switched the Samba server to be a domain member. We have done this before so thought we knew all the could happen had already happened and took...

...n. If someone tried logging into my workstation with their account (even though their account is a valid domain account) - I need it to reject the attempt. Is there an easy way to do this? Is it even possible? Thanks! -Jason PS - I have set up the PDC on ClearOS 5.1 (which is the successor to ClarkConnect) -- ================================================= Jason Somers Network Administrator Red Barn Technology Group, Inc. 1235 Front Street - Suite 3 Binghamton, NY 13905 (607) 772-1888 x222

I have installed nut 2.0 Var/log/messages: Aug 14 16:37:26 server kernel: hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS BF500 FW:814.s3.I USB FW:s3] on usb-0000:00:1d.0-1 Aug 14 16:37:26 server kernel: hub 5-0:1.0: USB hub found Aug 14 16:37:26 server kernel: hub 5-0:1.0: 2 ports detected My ups.conf : [APC350] driver = apcsmart port = /dev/usb/hidddev96 desc =

Hi there.... Has anyone seen a tutorial around for a pptp server (on the same server as the firewall) for centos/rhel 4? I have been following a few general tutorials for POPTOP, but nothing seems to really work as of yet. Thanks! -------------- next part -------------- An HTML attachment was scrubbed... URL:

...ion 2.6.2, but the "configure"command did never succeed :(, some problems about not finding a valid cc or gcc. (/lib/libgcc_s-3.2.2-20030225.so.1) even if it is not the newst gcc lib, it should work no ? I supose I installed the latest stable linux version (2.40.xx) with a clarkconnect 2.2 (March/April 2004) (Redhat 9 ?) so I do not understand the install problem. So finaly I found the latest ".rpm" compiled package but it's only a 2.5.6 version. :( - on Windows platform, I did find a light version of rsync composed only of (rsync.exe, ssh.exe, rsetup....