search for: cheapos

We have a large install of 360's running rev 4.1 with zero problems. I did another, smaller install couple weeks ago with 40 360's running rev 5.3. In both cases, the install was identical, same Asterisk version, same dialplan, everything the same except the differences were: 1. Different firmware rev 2. Different physical LAN Guess what? On the smaller install, lockups and reboots.

What sound cards are recognized by Centros? I have installed it on an old 400MHz IBM Aptiva that has Crystal Audio built-in. However it does not seem to recognize that, nor a Sound Blaster, nor a Sound Blaster 16 that I have tried. Any cheapo cards that it would recognize? Mike

Folks, I have a TDM400 with an FXS module. I'm having some trouble ringing some phones attached to the device. I have a real el cheapo handset that cost me about 9UKP. It works fine, I plug it into the Wildcard and call the channel and it rings. I have tried plugging in my BT Diverse 3016 cordless phone but it will not ring, although I can call out from it. I have also tried my GPO 332L

A few months ago I discovered *. Recently have taken more interest in it, since I have to install phones into my wife's small office. Hope that my questions weren't discussed recently and are not to dumb. The current requirements for * consist of a single incoming ISDN BRI line (currently have 5 MSN allocated), 3 internal extensions and a single analog fax. 1. I plan to buy some el

At the risk of being flamed.... Has anyone had any success get the 'El cheapo' Wildcard W100P clone's (?20 flavour) to work with UK Caller ID? I'm not sure what the status of Asterisk 1.6 is with respect to UK caller ID, being that we have an odd method of sending the FSK ahead of the ring, but I'm guessing I can't be the first to ask this? Keeping in mind that cost is

...phones on our network. This is a small setup, for no more than 20 users total. ?We need at least one of them to be a "receptionist" phone, the sort that calls can be routed from throughout the network, and then several more garden-variety handsets for regular users. ?A couple of el-cheapos to stick in out-of -the-way, little used spots would also be nice, if there are any good ones out there. Any phones that you've loved? ?Any that you've hated? ?Your input will be most welcome. Cheers, John Mensel ?

Is there any point in reporting specific devices that work with umass(4) any more, or is the assumption these days that anything that will work on a Windows or Linux box, without additional drivers, will also work on FreeBSD? The cheapo 'pen drive' that I picked up on ebay yesterday surprised me by just working, with no pain whatsoever... I'm wondering if maybe I shouldn't be so

Sorry, bounced this the first time ;( Darren I'd happily switched to a real cert if I knew that this was the problem. Are you using the cert actually on the phone to validate its identity? I have the org unit set slightly differently on my fake CA and the phone to make netscape derived browsers happy. The trouble is that I'm not getting a useful enough error message from anyone

Primus in Canada has launched a SIP-based service to replace your business and residential POTS lines with a VoIP version. It's called TalkBroadband and it looks killer: http://www.primus.ca/en/residential/talkbroadband/index.html Basic service for $20 Cdn a month!! Local number portability!! Cheapo Primus LD rates!! They don't care where geographically you plug it in!! When you sign

Hi all, I'm currently on an NTL PSTN line, using Asterisk 1.2 and a X101P cheapo card. The problem lies with detecting when the far end has hung up. It fails to detect it, and will only cleardown when the silence timeout has been reached. Now, I've seen the thread at http://www.mail-archive.com/asterisk-users@lists.digium.com/msg32337.html, to which nothing has come of it. That was

Hello Even the cheapest GSM gateway I found for a simple SOHO server costs over $300. If possible, I'd rather have a local solution than use a remote VoIP provider to have Asterisk make outgoing calls to the GSM network. So... I was wondering if there are some entry-level cellphones that can somehow be hooked up to a PC running Asterisk and used as an el-cheapo GSM gateway? Thank you.

What is most effective amount of memory for a RedHat 6.0 box used as a file / print / mail server? I have 128MB in a Celeron 400 box running file/print/mail services & Gnome. It seems a little slow. Not sure if it's the RAM, video ( cheapo 2MB Cirrus Logic card) &/or hard drive Quantum IDE 6GB hard drive.

Anyone tried this, I put in an Asterisk/FreePBX phone system to replace one of those el cheapo Bizfon analog key systems. The Bizfon was able to do follow me to analog lines but I do not believe the capability is in Asterisk. Of course now it becomes the one feature they cannot do without. Somehow the Bizfon is able to detect if an analog line is answered (without answer supervision). If not

Just looked at the log from the x86_64 machine and I see the same zcat: stdout: Broken pipe in the 00-makewhatis.cron job as on the x86 machine. Did I miss some thread about current updates somewhere? sam -- Sam W.Drinkard -- sam at wa4phy.net NOAA Cooperative Observer http://wa4phy.net Augusta Area Mesonet

Installing DevkitLite hardware (Very similar to John Lange's post on Tue Oct 08 2002) I cannot get anything to work on the phone connected to the s100u. I dont know what to do. Can someone please help me? I used the sample configuration files from digium documentaion that was supposed to be "sane" defaults for the kit. Very similar to John Lange's post on Tue Oct 08 2002 Here

> > Just thought you'd like to know CD Baby has switched to FLAC for > > archiving the 40,000 CDs we have in stock. > > Luckily HD space is down below $1/gig so we got a 6-terabyte RAID-5 > > box set up for about $7000. > > Well, even if you do have a lot of Morton Feldman (currently my record > for best compression ratio--about 0.25 or so), I don't think

Hello, I just bought a Snom-320 from ATAComm. I plugged it into my LAN, registered it with *, etc. All my other SIP gear is Sipura and works fine, both on the LAN and over the Internet. The new Snom seems like it can't process the audio from the handset mic. A steady tone is garbled, even on the LAN. I've contacted ATAComm, Snom and the company representing Snom in the US. So

Issue: Vista reads slowly from a samba server. This appears to pop up periodically here and elsewhere. My samba.conf file has: [homes] ... vfs objects = readahead As suggested elsewhere. Writes are approximately 17-18MB/s which is acceptable. Reads are in the 8MB/s range which is appalingly slow. Using linux smbclient and windows XP clients I can read at 25+MB/s. I've enabled vfs

I am sure Primus has a SIP platform because we have played with it. We managed to use it on MSN's SIP phone as well as couple Zultys ZIP2x2 hard phones. Their PC-Phone app is also a SIP soft phone. If you are registering to sip.iprimus.net then it is definitely their SIP platyform not MGCP. David >>> asterisk-users@eol.ca 1/21/2004 6:39:34 AM >>> I'm not sure Primus

Skipped content of type multipart/alternative-------------- next part -------------- A non-text attachment was scrubbed... Name: zapata.conf Type: application/octet-stream Size: 590 bytes Desc: zapata.conf Url : http://lists.digium.com/pipermail/asterisk-users/attachments/20040811/dfc853bc/zapata.obj -------------- next part -------------- A non-text attachment was scrubbed... Name: zaptel.conf