search for: capifs

...My problem is when I make a "make menuconfig" in /usr/src/linux/, i can't see any reference to CAPI2.0 filesystem support, in my kernel, 2.4.18 (Debian stable). When I make a capiinit, to test the AVM card, it says, debian-asterisk:~# capiinit modprobe: Can't locate module capifs modprobe: Can't locate module capifs WARNING: filesystem capifs not available /lib/modules/2.4.18/kernel/drivers/isdn/avmb1/b1pci.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters /lib/modules/2.4.18/kernel/...

...ppp_deflate bsd_comp 5280 0 ppp_synctty 7712 1 ppp_generic 22516 8 ppp_async,ppp_deflate,bsd_comp,ppp_synctty slhc 6368 1 ppp_generic capidrv 30036 1 isdn 110464 1 capidrv capi 16416 6 capifs 3912 2 capi cmtp 16896 3 kernelcapi 43584 3 capidrv,capi,cmtp l2cap 21540 3 cmtp snd_pcm_oss 50724 0 snd_pcm 88196 2 snd_ali5451,snd_pcm_oss snd_page_alloc 9060 1 snd_pcm snd_timer...

...n-init config [OK] /etc/misdn-init.conf created. It's now safe to run "/usr/sbin/misdn-init start" [ii] make your ports (1-2) available in asterisk by editing "/etc/asterisk/misdn.conf" [root at odysseus asterisk-1.4.8]# service misdn-init start CAPI Subsystem Rev 1.1.2.8 capifs: Rev 1.1.2.3 capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. [<c1005d3a>] show_trace_log_lvl+0x1a/0x2f [<c10062e3>] show_trace+0x1...

...http://dl.atrpms.net/all/fcpci-03.11.07-14.fc8.i386.rpm and http://dl.atrpms.net/all/fcpci-kmdl-2.6.23.14-115.fc8PAE-03.11.07-14.fc8.i686.rpm) and isdn4k-utils. I 'modprobe capi' and 'modprobe fcpci' which appear to work fine, as I have no error messages and 'dmesg' shows: capifs: Rev 1.1.2.3 capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) However when I execute 'capiinfo' I get: capi not installed - No such device or address (6) 'lspci' shows: 00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266] 00:01.0 PCI bridge: VIA Te...

Hi, I successfully installed 2 avm card in my asterisk box but I'm unable to make call. My capi.conf is: msn=0721111,07211115 incomingmsn=* controller=1,2 softdtmf=1 context=default echocancel=yes callgroup=1 devices=2,2 my capi info : Contr1: 2 B channels total, 2 B channels free. Contr2: 2 B channels total, 2 B channels free. my extensions.conf : exten =>

...noting on output, but it load modules: *root@asterisk:~# lsmod Module Size Used by b1pci 10624 0 b1dma 17412 1 b1pci b1 25856 2 b1pci,b1dma capi 19392 0 kernelcapi 49664 4 b1pci,b1dma,b1,capi capifs 7176 2 capi ipv6 271136 12 lp 12964 0 mISDN_l2 44288 0 mISDN_l1 13192 0 avmfritz 25740 0 mISDN_isac 17280 1 avmfritz mISDN_core 75648 4 mISDN_l2,mISDN_l1,avmfritz,mISDN_is...

...ocol=0x2 layermask=0xf FATAL: Module avmfritz not found. >> /sbin/modprobe --ignore-install mISDN_dsp debug=0 options=0 FATAL: Module mISDN_dsp not found. creating device node: /dev/mISDN Syslog reports: Apr 11 22:45:04 office kernel: CAPI Subsystem Rev 1.1.2.8 Apr 11 22:45:04 office kernel: capifs: Rev 1.1.2.3 Apr 11 22:45:04 office kernel: capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) I think my problem is my wrong kernel and my kernel-moduls: Kernels is kernel-2.6.18-164.15.1.el5.i686 But if I look into the packages "kmod-mISDN " I can see: # rpm -iql kmod-m...

Hi all, I'm new to asterisk and not too knowledgeable on ISDN, so please be gentle :) I have a dual-channel Eicon Diehl Diva card in a Debian Woody box with kernel 2.4.27, connecting to a Telstra (Australia) Onramp Home Highway ISDN line. I'm pretty certain the card and line both work since they've been used in this machine for PPP before this (but with an older kernel with DoV

...DIVA Server cards ---> Modular ISDN driver ---> <M> Support modular ISDN driver [ ] Enable memory leak debug for mISDN (NEW) [*] Support for AVM Fritz!Cards [*] Support for NETJet cards DMESG RESULTS --------------- CAPI Subsystem Rev 1.1.2.8 capifs: Rev 1.1.2.3 capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) Modular ISDN Stack core $Revision: 1.37 $ mISDNd: kernel daemon started (current:ca4d8680) mISDNd: test event done ISDN L1 driver version 1.18 ISDN L2 driver version 1.31 mISDN: DSS1 Rev. 1.42 mISDN Capi 2.0 driver file...

...e for the oops: /----- BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<c0103dd6>] __math_state_restore+0x56/0x90 *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP last sysfs file: /sys/module/configfs/initstate Modules linked in: netconsole configfs dahdi_echocan_oslec echo capifs loop wcb4xxp rtc_cmos i2c_i801 rtc_core dahdi 8250_pnp 8139too floppy 8250 rtc_lib mii serial_core i2c_core processor pcspkr rng_core button ide_pci_generic ide_core sd_mod crc_t10dif thermal [last unloaded: netconsole] Pid: 1268, comm: clip.agi Not tainted 2.6.35.4 #1 P4Dual-915GL/P4Dual-915GL EI...

...uff - chan_capi 0.3.5 When I load the whole modules lot, I get the following in dmesg: Modular ISDN Stack core $Revision: 1.25 $ mISDNd: kernel daemon started ISAC module $Revision: 1.16 $ mISDNd: test event done CAPI Subsystem Rev 1.1.2.8 capi20: Rev 1.1.2.7: started up with major 68 (middleware+capifs) ISDN L1 driver version 1.11 ISDN L2 driver version 1.20 mISDN: DSS1 Rev. 1.30 mISDN Capi 2.0 driver file version 1.14 X25 DTE modul version 1.8 AVM Fritz PCI/PnP driver Rev. 1.30 ACPI: PCI interrupt 0000:00:14.0[A] -> GSI 10 (level, low) -> IRQ 10 mISDN_fcpcipnp: found adapter Fritz!Card PCI...

...ib/modules/2.4.20/kernel/drivers/isdn/avmb1/capiutil.o Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/kernelcapi.o Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/capiutil.o Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/kernelcapi.o Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/capifs.o Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/capi.o Using /lib/modules/2.4.20/kernel/drivers/isdn/avmb1/fcpci.o Warning: loading fcpci will taint the kernel: non-GPL license - Proprietary See http://www.tux.org/lkml/#export-tainted for information about tainted modules Using /lib/modules...

...el, so I directly loaded the 'hisax_fcpcipnp' module from it. I install also Capi modules by downloading archives of the web (make config - make install - insmod...). When i check loaded modules: # lsmod Module Size Used by Not tainted capi 20864 0 capifs 5424 1 [capi] kernelcapi 34048 1 [capi] capiutil 24864 0 [kernelcapi] i810_audio 25244 1 (autoclean) ac97_codec 17236 0 (autoclean) [i810_audio] e100 55496 1 hisax_fcpcipnp 7968 0 hisax_...

...working very good :) and the Fritz AVM pc Card is running. capiinit: 1 fcpci running fritz-pci A1 3.11-02 0xbc00 5 lsmod: fcpci 587744 1 capi 20896 0 kernelcapi 33792 2 [fcpci capi] capiutil 24864 0 [kernelcapi] capifs 5420 1 [capi] Here is a little output when I try to compile chan_capi: chan_capi.c:2450: subscripted value is neither array nor pointer chan_capi.c:2457: subscripted value is neither array nor pointer chan_capi.c:2464: subscripted value is neither array nor pointer chan_capi.c...

Hello, I'm trying to install CAPI Driver for Suse 9.2 and I found the documentation for this pretty old since It refers to Suse 8.2 ( http://www.voip-info.org/wiki-Asterisk+AVM+Fritz+CAPI+Driver+Install ). This is especially apparent when I look at the section of these instructions for altering "src.drv/makefile" to replace the occurance of "CARD_PATH". I tried to

...n connected to 2 isdn lines via an AVM C2 card. modules seems to load well, lsmod gives : c4 19588 4 b1 24192 1 c4 capidrv 28468 2 isdn 134604 9 capidrv slhc 7552 1 isdn capi 18112 4 capifs 6024 2 capi kernelcapi 46112 4 c4,b1,capidrv,capi 'capi info' from * console returns correctly : Contr1: 2 B channels total, 2 B channels free. Contr2: 2 B channels total, 2 B channels free. (chan_capi-0.3.5) I'm doing outgoing calls in this way :...

...piinit start modprobe: Can't locate module kernelcapi ERROR: cannot load module kernelcapi Although, i think i hav everything build in, and loaded: ~# grep -i capi linux-2.4.27/.config CONFIG_ISDN_CAPI=y CONFIG_ISDN_CAPI_MIDDLEWARE=y CONFIG_ISDN_CAPI_CAPI20=y CONFIG_ISDN_CAPI_CAPIFS_BOOL=y CONFIG_ISDN_CAPI_CAPIFS=y CONFIG_ISDN_CAPI_CAPIDRV=y # CONFIG_HYSDN_CAPI is not set What else do i need in the kernel? I am using Debian stable and a custom 2.4.27 vanilla kernel. Thanks, Mario

...I have compiled it with explicit PROC=i386, because 'uname -m' returns i686, but the VIA processor does not support some of 686 instructions that the Asterisk executable uses. # lsmod | grep capi capidrv 29748 0 isdn 128204 1 capidrv capi 17728 0 capifs 6024 2 capi kernelcapi 46624 6 c4,blpci,bldma,bl,capidrv,capi

...500632 1 c4 20317 0 b1pci 10445 0 b1dma 17261 1 b1pci b1 25549 3 c4,b1pci,b1dma capi 17281 4 kernelcapi 44385 6 fcpci,c4,b1pci,b1dma,b1,capi slhc 7105 1 ppp_generic capifs 5961 2 capi -------------- next part -------------- An HTML attachment was scrubbed... URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20041217/6f151c2a/attachment.htm

...IG_ISDN_DRV_ICN=m CONFIG_ISDN_DRV_PCBIT=m CONFIG_ISDN_DRV_SC=m CONFIG_ISDN_DRV_ACT2000=m CONFIG_ISDN_DRV_TPAM=m CONFIG_HYSDN=m CONFIG_HYSDN_CAPI=y # # CAPI subsystem # CONFIG_ISDN_CAPI=m CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y CONFIG_ISDN_CAPI_MIDDLEWARE=y CONFIG_ISDN_CAPI_CAPI20=m CONFIG_ISDN_CAPI_CAPIFS_BOOL=y CONFIG_ISDN_CAPI_CAPIFS=m CONFIG_ISDN_CAPI_CAPIDRV=m # # CAPI hardware drivers # # # Active AVM cards # CONFIG_CAPI_AVM=y CONFIG_ISDN_DRV_AVMB1_B1ISA=m CONFIG_ISDN_DRV_AVMB1_B1PCI=m CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y CONFIG_ISDN_DRV_AVMB1_T1ISA=m CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m CONFIG_ISDN_D...