search for: c1000

Has anyone been able to get an APC Smart UPS C1000 to work with NUT on pfSense? I can't figure it out. -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.alioth.debian.org/pipermail/nut-upsuser/attachments/20120830/d1f5b864/attachment.html>

...B/serial proprietary cables.) > > It might be this 10-pin modular connector: http://pinoutguide.com/UPS/apc_usb_cable_pinout.shtml <http://pinoutguide.com/UPS/apc_usb_cable_pinout.shtml> Correction to my correction: apparently APC uses both 8-pin and 10-pin modular jacks. The SmartUPS C1000 has a 10-pin jack labeled serial (and the industry-standard USB Type B jack for USB, hooray), but for your models, a few images online seem to show an 8-pin jack labeled "data port" for the BackUPS Pro 1000 and BackUPS NS 1080. -------------- next part -------------- An HTML attachment wa...

...d. (I was incorrect when I said 8P8C before - MGE uses > 8P8C modular jacks for similar USB/serial proprietary cables.) [...] On 12/27/18 8:17 AM, Charles Lepple wrote: > [...] Correction to my correction: apparently APC uses both 8-pin and > 10-pin modular jacks. > > The SmartUPS C1000 has a 10-pin jack labeled serial (and the > industry-standard USB Type B jack for USB, hooray), but for your > models, a few images online seem to show an 8-pin jack labeled "data > port" for the BackUPS Pro 1000 and BackUPS NS 1080. [...] On 12/28/18 12:30 AM, Manuel Wolfsh...

...he > listing that looks like it could be the UPS? (The 051d vendor ID is > for the vast majority of APC UPS models, but we have seen a few other > IDs here and there - mostly from acquisitions.) > > For instance, this is what one of my development boxes shows for a > Smart-UPS C1000: > > [...] > > Another thing to try is to unplug the USB cable, run something like > "dmesg -w" ("-w" to follow the output; otherwise just run "dmesg | > tail" afterwards) and see if you see any messages about new USB > devices after you re-inse...

On 12/26/18 8:55 AM, Charles Lepple wrote: > On Dec 25, 2018, at 4:07 AM, David Melik wrote: >> Lately I got (used) an APC Back UPS Pro 1000 and Back UPS NS 1080. I got an [8P8C]-to-USB cable from another UPS, but the Pro isn't detected (with usbhid-ups.) I haven't tried the NS yet but it seems to not be on the list though looks just like the Pro. >> > There are a few

I've drug it as far under the table as I can get it on a 30% heart. Yeah, I'm getting on, I'll be 85 in about 2 weeks. Heart surgury will be scheduled in the next few days to replace a worn out, leaky aortic valve. Piece if cake if my veins are big enough. So what driver do I use with a Smart-UPS_1500??? Never mind it was found and accessed by the bootup! upsc my usp reports:

....4. > Which is a little less verbose than the smaller belkin I took out because > its 3rd battery set had failed, apparently at least 3 shorted cells. The full set of variables is hiding behind another APC-specific protocol. At least this time the protocol is documented. I have a Smart-UPS C1000 that does the same thing. I've been meaning to mess with it, but so many other projects... Also, hard to argue with "it works". - Charles

...t; part, do you see anything in the listing that looks like it could be the UPS? (The 051d vendor ID is for the vast majority of APC UPS models, but we have seen a few other IDs here and there - mostly from acquisitions.) For instance, this is what one of my development boxes shows for a Smart-UPS C1000: $ lsusb Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 010 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 004: ID 1c4f:0003 SiGma Micro HID controller Bus 008 Device 002: ID 051d:0003 America...

...r similar USB/serial proprietary cables.) >>> >>> It might be this 10-pin modular connector: http://pinoutguide.com/UPS/apc_usb_cable_pinout.shtml >> >> Correction to my correction: apparently APC uses both 8-pin and 10-pin modular jacks. >> >> The SmartUPS C1000 has a 10-pin jack labeled serial (and the industry-standard USB Type B jack for USB, hooray), but for your models, a few images online seem to show an 8-pin jack labeled "data port" for the BackUPS Pro 1000 and BackUPS NS 1080. > > But these eight-pin ones aren't actually ethern...

Hello I assume I'm not the first one to think about this: Is it possible to connect an intercom and/or door bell to Asterisk, so that I can get an e-mail that someone rang my place while I was out? Even better: If used for a doctor's office, it'd be cool if patients could type their Social Security Number on a keypad, which would open the door and notify Asterisk which would then

...[1]: timer IRQ19 > [ 1.500462] kvm [1]: Hyp mode initialized successfully > root@cubietruck:~# uname -a > Linux cubietruck 4.3.0-1-armmp-lpae #1 SMP Debian 4.3.5-1 (2016-02-06) > armv7l GNU/Linux > root@cubietruck:~# qemu-system-arm -machine help > akita Sharp SL-C1000 (Akita) PDA (PXA270) > borzoi Sharp SL-C3100 (Borzoi) PDA (PXA270) > canon-a1100 Canon PowerShot A1100 IS > cheetah Palm Tungsten|E aka. Cheetah PDA (OMAP310) > collie Sharp SL-5500 (Collie) PDA (SA-1110) > connex Gumsti...

Thank you VERY much, Roger, for your detailed explanations. I'm going to choose to heed your warning. > On Thu, 8 Sep 2016, Jeff Bowman wrote: > > > 1. CLI error: I get an error when running ?upsdrvctl start?: ?Can't > > claim USB device [051d:0003]: libusb0-dll:err [claim_interface] could not > claim interface 0, win error: The requested resource is in use.? The

...ied adding this to upsd.conf: LISTEN 127.0.0.1 3493 But the result is still the same. Running this again: upsc ups at localhost Also still results in a blank line. I tried adding this to ups.conf: vendorid = 051d But that didn't help either. My UPS is an APC Smart-UPS Model C1000, if that helps. This is starting to get sticky, isn't it? > Given that a perfect data set is mission critical for you, I would recommend > having a test rig where you can check that you can handle wall power return > at every phase of NUT action. My plan is to plug the server into a...

...ULE_InitDLL (0x403815f8,PROCESS_ATTACH,0x1) - RETURN 1 trace:module:MODULE_DllProcessAttach (PRO666.exe,0x1) - END trace:module:GetModuleHandle16 (USER.EXE)trace:module:map_image mapping section .text at 0x46e000 off 8e00 size 152800 flags 60000020 trace:module:map_image mapping section .data at 0x5c1000 off 15b600 size 6200 flags c0000040 trace:module:map_image clearing 0x5c7200 - 0x5c8000 trace:module:map_image mapping section .data1 at 0x5ca000 off 161800 size 5000 flags c0000040 trace:module:map_image mapping section .rsrc at 0x5cf000 off 166800 size 600 flags 40000040 trace:module:map_image ma...