search for: bn4s0

I'm having trouble installing Beronet BN4S0 card. I have downloaded instructions from here http://www.beronet.com/download/card_installation_guide.pdf And when I download install-misdn-mqueue[1].tar.gz I untar it and execute "make" and "make install". This is the output that I get. [root@nbirma1 install-misdn-mqueue]# ma...

Hello. Just installed the Beronet BN4S0 card. But i can't connect to my ISDN Line. misdnportinfo gives (what does ":Layer 4 protocol 0x04000001 is detected, but not allowed for TE lib" mean?): best regards and thanks t. asterix asterisk # misdnportinfo Port 1: TE-mode BRI S/T interface line (for phone lines) -> Pro...

Hi, i use an BN4S0 with misdn an asterisk on Linux 2.6.9. The hfcmulti module is loaded with option: type=0x04 protocol=0x2,0x2,0x22,0x2 layermask=0xf,0xf,0xf,0xf and the fourth port is connected to an ISDN PTMP (MSN) port. Call to #72 from S0 (BN port 4) are not accepted from asterisk but why ? Can anyone give...

Hi, I guess I'd need to run Beronet quad and octo bri cards under bristuff to get zaptel features (echo canceling, timing source).... Am I right or could I achieve this also with chan_misdn - their native driver ? Running bristuff on Beronet cards is unsupported. Has anyone succesfully run Beronet quad BRI cards under bristuff recently ? Do they work ? Regards, Rob.

We have here a TandBerg "videoconferencing system" connected in asterisk with a Beronet card BN4S0 (4 BRI ports). I`m trying to make a videoconferece (video + audio) with this Tandberg to another Tandberg using the ISDN channels through the BN4S0 BRI Card. But, i'm only obtaining audio calls, the video not appears. When i try to make a 64K calls (data calls), the call does not complete. I`m...

Hi, I'm currently trying to get a BN4S0e (which is basically a BN4S0 with a PCIe connector) working with dahdi. The module is loading properly but the card is not detected by the module. Is support on dahdi planned for this card ? In the meantime i'm gonna use mISDN with this card. Thanks Laurent

Hi, I setup an asterisk system (asterisk 1.8-rc3, dahdi-linux-2.4.0 with dahdi-extra from Tzafrirs git, kernel 2.6.35.4). The hardware is an older pc system with Celeron CPU (2.5 GHz) with a Beronet BN4S0 ISDN card. The system starts without any errors. I discovered a severe issue. The kernel panics on a very small load. The first call normally gets through. If I start the second or third call and sometimes when I terminate the first call, the system panics (Oops text on console). After solving so...

...ot; debug="0" timer="no">hfcmulti</module> <module debug="0" options="0">mISDN_dsp</module> <devnode user="root" group="root" mode="644">mISDN</devnode> <card type="BN4S0"> <port mode="nt" link="ptp">1</port> <port mode="nt" link="ptp">2</port> <port mode="nt" link="ptp">3</port> <port mode="n...

Hi, I plan to setup an * Server with a TE10P PRI card as E1 and a BN4S0 4 Port BRI card in one box. I tried it first with the bristuff drivers from Junghanns. The BRI card worked fine alone, but as soon as I load the zaptel driver for the TE110P the BRI card says, that the port is down. So I tried it with mISDN. But it seems that this stuff is still unstable (Asteri...

...card, which is a pure Zaptel solution, which is fantastic, but they have no hardware EC solution, and their drivers are becoming increasingly un-stable with time (I back-port to a modified qozap driver from 0.2.0-RC8n which is the last one I can run without bad behaviour) I am aware of the Beronet BN4S0, which appears to be "exactly" the same card as the Junghanns card, but with mISDN drivers, still no h/w EC solution, and as a result, less effective (from what I read here) software echo cancellation. I thought I had struck gold when I saw the Digium B410P, which had a driver that build...

I see a lot of comments but no actual show runs. Can someone post a 7206 config. I am having a dickens of a time getting calls to pass. I currently have the following loaded. Cisco IOS Software, 7200 Software (C7200-IK9O3S-M), Version 12.3(8)T6, RELEASE SOFTWARE (fc2) Thanks !!! Jerry -- No virus found in this outgoing message. Checked by AVG Anti-Virus. Version: 7.0.344 /

...red on major 196 May 11 19:10:09 kernel: dahdi: Version: 2.3.0.1 May 11 19:10:09 kernel: wcb4xxp 0000:05:04.0: probe called for b4xx... May 11 19:10:09 kernel: wcb4xxp 0000:05:04.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32 May 11 19:10:09 kernel: wcb4xxp 0000:05:04.0: Identified BeroNet BN4S0 (controller rev 1) at 000000000001bc00, IRQ 32 May 11 19:10:09 kernel: wcb4xxp 0000:05:04.0: NOTE: hardware echo cancellation has been disabled May 11 19:10:09 kernel: wcb4xxp 0000:05:04.0: Port 1: TE mode May 11 19:10:09 kernel: wcb4xxp 0000:05:04.0: Port 2: TE mode May 11 19:10:09 kernel: wcb...

Its been a few days, I was wondering if anyone else has any ideas on how to get this to work? If not, could I ask a the direct question as to if anyone here has (or knows someone who has) successfully got something like a Cisco Router to successfully establish an ISDN data/Internet connection through the Asterisk PBX?

...odule debug="1" -->> > options="0">mISDN_dsp</module> -->> > <devnode user="root" -->> > group="root" -->> > mode="644">mISDN</devnode> -->> > <card type="BN4S0"> -->> > <port mode="nt" -->> > link="ptmp">1</port> -->> > <port mode="nt" -->> > link="ptmp">2</port> -->> > <port mode=&quo...

Hi, folks: I remain intrigued by the gap in BRI implementation between North America and Europe, and I wanted to get feedback from the list members on the matter. I'm seriously considering making the leap in our office. In Europe, the idea that an office that does not have enough lines to justify PRI would use analog lines is perceived as technologically backwards, and yet that's what