We have here a TandBerg "videoconferencing system" connected in
asterisk
with a Beronet card BN4S0 (4 BRI ports). I`m trying to make a videoconferece
(video + audio) with this Tandberg to another Tandberg using the ISDN
channels through the BN4S0 BRI Card. But, i'm only obtaining audio calls,
the video not appears. When i try to make a 64K calls (data calls), the call
does not complete.
I`m trying with asterisk branch and trunk. The problem appears with both
versions.
I think that the problem is in libpri with "User Information Layer
1", because when i try to make the call the follow "pri debug span
1"
appears:
********* When i make a speech call: (i have sucess here) ***********
-- Executing Dial("mISDN/1-u3",
"Zap/g2d/0211130710535|20|Tt") in new stack
-- Making new call for cr 32776
-- Requested transfer capability: *0x00 - SPEECH*> Protocol Discriminator: Q.931 (8) len=35
> Call Ref: len= 2 (reference 8/0x8) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a3]
> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Speech (0)> Ext: 1 Trans mode/rate: 64kbps, circuit-mode
(16)> * Ext: 1 User information layer 1: A-Law (35)
*
*********** When i make a data call: (i don't have sucess here, it does not
complete the call) **********
-- Executing Dial("mISDN/1-u4",
"Zap/g2d/0211130710535|20|Tt") in new
stack
-- Making new call for cr 32777
-- Requested transfer capability: *0x08 - DIGITAL*> Protocol Discriminator: Q.931 (8) len=45
> Call Ref: len= 2 (reference 9/0x9) (Originator)
> Message type: SETUP (5)
> [04 02 88 90]
> Bearer Capability (len= 4) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Unrestricted digital information (8)> Ext: 1 Trans mode/rate: 64kbps, circuit-mode
(16)> *Ext: 0 User information layer 1: Unknown
(24)*
Someone has some idea? Thanks a lot.
Cleudson Freitas
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
http://lists.digium.com/pipermail/asterisk-users/attachments/20060105/a7dea2fe/attachment.htm
