search for: b101

Hi all Opensolaris works perfectly, but I am not able to boot the xvm kernel on this hardware. I added the -k option in grub, but the system hangs before the hostname line without any debug info. I''ve tried snv from b94 to b99, with the same results. If I install Debian with xen kernel I am able to use pvm and hvm guests. What can I do ? thanks Giacomo -- This message posted from

...'t. My sip.conf has: [101] type=friend host=dynamic username=101 secret=test dtmfmode=rfc2833 context=from-sip mailbox=201 callerid="101" <2125> nat=yes My extensions.conf has: exten => 101,1,Dial(SIP/101,20,tr) exten => 101,2,VoiceMail,u101 exten => 101,102,VoiceMail,b101 My voicemail.conf has: 101 => 2348,Emma, kidjue@yahoo.co.uk Any ideas are most welcome. -- Rgds, Juki _______________________________________________ Asterisk-Dev mailing list Asterisk-Dev@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-dev To UNSUBSCRIBE or update option...

...'t. My sip.conf has: [101] type=friend host=dynamic username=101 secret=test dtmfmode=rfc2833 context=from-sip mailbox=201 callerid="101" <2125> nat=yes My extensions.conf has: exten => 101,1,Dial(SIP/101,20,tr) exten => 101,2,VoiceMail,u101 exten => 101,102,VoiceMail,b101 My voicemail.conf has: 101 => 2348,Emma, kidjue@yahoo.co.uk Any ideas are most welcome. -- Rgds, Juki

Hi all. Is it at all possible to have a GS B101 NATed with firmware 1.0.4.40? I've tried both STUN and not STUN. The odds seems best with stun because the phone registers with right ip adress. When the connection is made * sends rtp packets to the right destination AND port, but the phone doesn't accept the packets..... Should I burn...

...gt; username:secret@zoot.netlogic.net [netlogic] type=friend host=dynamic context=sourcekit-main auth=plaintext username= secret= disallow=all allow=ulaw allow=all extensions.conf [sourcekit-sip] exten => 101,1,Dial(SIP/SK-101,20) exten => 101,2,Voicemail(u101) exten => 101,102,Voicemail(b101) exten => 101,103,Hangup exten => 2999,1,VoicemailMain(${CALLERIDNUM}) [sourcekit-main] include=>sourcekit-sip exten => +19193233010,1,GoTo(sourcekit-sip,101,1) exten => _1NXXNXXXXXX,1,SetCallerID(9193233010) exten => _1NXXNXXXXXX,2,Dial(IAX2/netlogic/${EXTEN}) exten => _1NX...

...of silence. Silence suppression is turned off on all phones (Grandstream BT101s). This issue does not occur during SIP calls. I do have a similar registration problem with SIP. There are two phones on one site that go reachable/unreachable. (See extension 6666 in the sample below. This is a B101 that is registered to my server, but it happens to be at the same location as the second * server.) If anyone can point me in the right direction for troubleshooting, I would appreciate it. I am pasting example error messages that I receive below. TIA, John CLI Output: May 23 12:50...

...ude => daytime-fwd1|9:00-21:00|*|* include => nighttime-fwd1|21:00-9:00|*|* [inbound-sip] exten => 533990,1,Goto(local,101,1) ; Internal Extensions [local] exten => 101,1,Dial(${MAINPHONE},20,Tt) exten => 101,2,Voicemail(u101) exten => 101,3,Hangup exten => 101,102,Voicemail(b101) exten => 101,103,Hangup

...IP/jsantacapita|20|Tt) [pbx_config] 2. Voicemail(u100) [pbx_config] 102. Voicemail(b100) [pbx_config] '101' => 1. Dial(SIP/mthomas|20|Tt) [pbx_config] 2. Voicemail(u101) [pbx_config] 102. Voicemail(b101) [pbx_config] '102' => 1. Dial(SIP/dli|20|Tt) [pbx_config] 2. Voicemail(u102) [pbx_config] 102. Voicemail(b102) [pbx_config] '105' => 1. Dial(SIP/nmartin|20|Tt) [pbx_config] 2. Voicemail(u105) [p...

...=somepass username=user01 context=localuse outkeys=myast inkeys=myast Office extensions.conf ====================== [officetime] exten => _999999,1,Answer exten => _999999,2,wait(1) exten => _999999,3,Dial(Zap/1,20,tr) exten => _999999,4,Voicemail,u101 exten => _999999,102,Voicemail,b101 exten => _999999,105,Hangup [noofficetime] exten => _999999,1,Answer exten => _999999,2,wait(1) exten => _999999,3,Dial(IAX2/user01/${EXTEN}) exten => _999999,4,Voicemail,u101 exten => _999999,102,Voicemail,b101 exten => _999999,105,Hangup [fromiaxfwd] include => officetim...

...=> 5,1,Goto(support,s,1) exten => 0,1,Dial,ZAP/2|10|mt exten => 100,1,Dial,Zap/2|20|m exten => 100,2,Voicemail,u100 exten => 100,102,Voicemail,b100 exten => 101,1,Dial,Zap/2|20|m exten => 101,2,WaitMusicOnHold,15 exten => 101,3,Voicemail,u101 exten => 101,102,Voicemail,b101 exten => 102,1,Dial,Zap/2|20|m exten => 102,2,Voicemail,u102 exten => 102,102,Voicemail,b102 exten => 103,1,Dial,Zap/2|20|m exten => 103,2,Voicemail,u103 exten => 103,102,Voicemail,b103 exten => 8500,1,VoicemailMain exten => i,1,Playback,pbx-invalid exten => t,1,Play...

Hello all... We are getting this error: "E2BIG - Arg list too long", when trying to send incremental backups (b89 -> b101). Do you know about any bugs related to that? I did a look on the archives, and google but could not find anything. What i did find was something related with wrong timestamps (32bits), and some ZFS test on the code: zfs_vnops.c. But the error is EOVERFLOW... Thanks a lot for your time! -- This...

...01] } type=friend } host=dynamic } username=101 } secret=test } dtmfmode=rfc2833 } context=from-sip } mailbox=201 } callerid="101" <2125> } nat=yes } } My extensions.conf has: } exten => 101,1,Dial(SIP/101,20,tr) } exten => 101,2,VoiceMail,u101 } exten => 101,102,VoiceMail,b101 } } My voicemail.conf has: } 101 => 2348,Emma, kidjue@yahoo.co.uk } } Any ideas are most welcome. } } -- } Rgds, } Juki } } _______________________________________________ } Asterisk-BSD mailing list } Asterisk-BSD@lists.digium.com } http://lists.digium.com/mailman/listinfo/asterisk-bsd &gt...

...'m not in a position to test that at the moment. But I presume it will.) Asterisk 1.2.1 extensions.conf file fragment: exten => 2000,1,Answer() exten => 2000,2,Playtones(ring) exten => 2000,3,Dial(Zap/1,15,dr) exten => 2000,4,VoiceMail(u101@default) exten => 2000,104,VoiceMail(b101@default) exten => 2,1,VoiceMailMain(101@default) I'd appreciate hearing from anybody who can clue me in on the above questions, or has any improvements or suggestions to make to the dialplan, or otherwise wishes to throw me a bone. Thanks. Karl <kop@meme.com> Free Software: "Y...

...exten => 1,1,Dial(SIP/myfwd#,20,tr) exten => 2,1,Dial(SIP/ my2ndfwd#,20,tr) exten => 100,1,Dial(SIP/ myfwd#,20,tr) exten => 101,1,Dial(SIP/my2ndfwd#,20,tr) exten => 100,2,VoiceMail,u100 exten => 101,2,VoiceMail,u101 exten => 100,102,VoiceMail,b100 exten => 101,102,VoiceMail,b101 exten => 1001,1,Ringing exten => 1001,2,Wait(2) exten => 1001,3,VoicemailMain include => fwd [fwd] exten => _8.,1,Dial,SIP/${EXTEN-1}@fwd.pulver.com,tr

Hi All, Its been a while since I touched zfs. Is the below still the case with zfs and hardware raid array? Do we still need to provide two luns from the hardware raid then zfs mirror those two luns? http://www.opensolaris.org/os/community/zfs/faq/#hardwareraid Thanks, Shawn -- This message posted from opensolaris.org

On Wed 07/01/09 20:31 , Carsten Aulbert carsten.aulbert at aei.mpg.de sent: > Brent Jones wrote: > > > > Using mbuffer can speed it up dramatically, but > > this seems like a hack> without addressing a real problem with zfs > > send/recv.> Trying to send any meaningful sized snapshots > > from say an X4540 takes> up to 24 hours, for as little as 300GB

...> Date: Thu, 23 Feb 2023 08:10:01 +0100 > From: "Emilio L. Cano" <emilopezcano en gmail.com> > To: Alfredo Diaz <afro77777 en gmail.com> > Cc: r-help-es en r-project.org > Subject: Re: [R-es] Problemas con algunos atajos en Rstudio > Message-ID: <8B24A0CC-B101-4A59-A660-E0D5870D1F78 en gmail.com> > Content-Type: text/plain; charset="utf-8" > > Hola, > > El comportamiento de CTRL + SHIFT + M lo puedes cambiar en Tools/Global > Options, tendrás marcado ?Use native pipe operator? en el grupo de opciones > ?Code?. CTRL+1 etc...

I recently had an X86 system (running Nexenta Elatte, if that matters -- b101 kernel, I think) suffer hardware failure and refuse to boot. I''ve migrated the disks into a SPARC system (b115) in an attempt to bring the data back online while I see about repairing the former system. However, I''m having some trouble with the import process: hydra# zpool impo...

-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 hi, i have two systems, A (Solaris 10 update 5) and B (Solaris 10 update 6). i''m using ''zfs send -i'' to replicate changes on A to B. however, the ''zfs recv'' on B is running extremely slowly. if i run the zfs send on A and redirect output to a file, it sends at 2MB/sec. but when i use ''zfs send

...gt; username:secret@zoot.netlogic.net [netlogic] type=friend host=dynamic context=sourcekit-main auth=plaintext username= secret= disallow=all allow=ulaw allow=all extensions.conf [sourcekit-sip] exten => 101,1,Dial(SIP/SK-101,20) exten => 101,2,Voicemail(u101) exten => 101,102,Voicemail(b101) exten => 101,103,Hangup exten => 2999,1,VoicemailMain(${CALLERIDNUM}) [sourcekit-main] include=>sourcekit-sip exten => +19193233010,1,GoTo(sourcekit-sip,101,1) exten => _1NXXNXXXXXX,1,SetCallerID(9193233010) exten => _1NXXNXXXXXX,2,Dial(IAX2/netlogic/${EXTEN}) exten => _1NX...