search for: ap9617

Hi, we do have APC Smart-UPS each with AP9617 and latest FW. As we found out we are not able to shutdown the UPS via SNMP - neither immediately nor delayed. And we cannot set values, but we can read them correctly. So it seems as we are not able to write to the UPS and get back strange errors. root at abex:/etc/nut# upsdrvctl -DDDD shutdow...

I have a couple of Slackware servers which I have plugged into some APC UPS's. Each UPS has a network management card in it - one is the AP9617 and the other is the AP9606. I want the servers to shut themselves down when the UPS's go into "low battery" mode. What do I need to install? I've read this thread http://lists.alioth.debian.org/pipermail/nut-upsuser/2006-January/000585.html which implies I should install: net...

I have three APC SmartUPS 5000s. Two of them are AP9617 and one is AP9619. I have a RS-232 connections from my monitor host to all three. All three report status and give information. One of the two AP9617 - ups3-1 - does not shut down when FSD is sent. It did when I first set this system up a year or two ago but it's stopped doing so since then....

I know this isn't exactly the right place to ask, but I figure at least *someone* on this list has done it once. I recently acquired an AP9617 web/snmp management board for my UPS. The web and telnet part of it work great. However, I can't get *anything* from the snmp interface. I've triple-checked the community name and access settings (currently are wide open). I've ensured SNMP is in fact enabled. I'd like to be ab...

...directory Makefile. After that, the code compiles correctly. It also runs correctly. Incidentally, the remarks in the snmp-ups driver man page that say "APC AP9606 APC Web/SNMP management card, perhaps others" could definitely use updating, since the driver categorically works with the AP9617 card. Since the AP9617 card is programmatically identical to the AP9618 and AP9619 cards, I'd say that it's safe to claim that the driver works with all three. One more note. I flashed the AP9617 firmware to the latest "apc_hw02_aos373_sumx372" version. I'm using V1.0 SNMP...

I'm trying to get SNMPv3 management working for an APC AP9617 card. It is newly refurbed, running sumx v3.7.2 and aos v3.7.3. In the SNMPv3 user profiles section I have (I don't care about the password leaking, it's temporary): User Name: nut Authentication Passphrase: NutScan at Password43LongerWord Privacy Passphrase: NutScan at Password43Lo...

New NUT install dealing with three APC Smart-UPS 5000s, two of which have AP9617 and the third has a AP9619 card. The SNMPv3 configurations on all three are exactly the same. This is confirmed by snmpget calls that work just fine: snmpget -Cf -v3 -u [...] -l authPriv -A '[...]' -X '[...]' -a MD5 -x DES [upsname] .1.3.6.1.4.1.318.1.1.1.1.1.1.0 snmp-ups...

Hi Dmitry and the list, would you (or anyone owning such a device) be able to validate the below patch: https://alioth.debian.org/tracker/index.php?func=detail&aid=310613&group_id=30602&atid=411542 Most notably, it's about the paths changes: -#define APCC_OID_IEM_TEMP ".1.3.6.1.4.1.318.1.1.10.2.3.2.1.4.0" -#define APCC_OID_IEM_TEMP_UNIT

...tting This is an EXTERNAL email. Please take a moment and think before clicking any links or opening any attachments from this email. If suspicious, please forward to ishelpdesk at tripplite.com for review. ________________________________ I'm trying to get SNMPv3 management working for an APC AP9617 card. It is newly refurbed, running sumx v3.7.2 and aos v3.7.3. In the SNMPv3 user profiles section I have (I don't care about the password leaking, it's temporary): User Name: nut Authentication Passphrase: NutScan at Password43LongerWord Privacy Passphrase: NutScan at Password43Lo...

...al character device for use # with simple-signaling UPSes. # # pcnet ipaddr:username:passphrase # PowerChute Network Shutdown protocol # which can be used as an alternative to SNMP # with AP9617 family of smart slot cards. # ipaddr is the IP address of the UPS mgmt # card. username and passphrase are the # credentials for which the card has been # configured. # #UPSTYPE apcsmart #DEV...

Here are a series of my recent changes to NUT. The first few in the set are primarily little fixes and improvements. In among those are a few for .gitignore files which of course you can ignore for SVN, and there's one for a commit to a generated file which of course should not be tracked in any VCS. Then there are a couple or three to do with generating the header files used by