asterisk users - Nov 2009 - Problems with dahdi on asterisk 1.6.1.9 with TE122

Hello,

I am installing dahdi on a machine
lspci 
00:00.0 Host bridge: Intel Corporation 3200/3210 Chipset DRAM Controller (rev
01)
00:01.0 PCI bridge: Intel Corporation 3200/3210 Chipset Host-Primary PCI Express
Bridge (rev 01)
00:06.0 PCI bridge: Intel Corporation 3210 Chipset Host-Secondary PCI Express
Bridge (rev 01)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #4 (rev 02)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #5 (rev 02)
00:1a.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #6 (rev 02)
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #2 (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1
(rev 02)
00:1c.4 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 5
(rev 02)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6
(rev 02)
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI
Controller #3 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI
Controller #1 (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 92)
00:1f.0 ISA bridge: Intel Corporation 82801IR (ICH9R) LPC Interface Controller
(rev 02)
00:1f.2 IDE interface: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA
IDE Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 02)
00:1f.5 IDE interface: Intel Corporation 82801I (ICH9 Family) 2 port SATA IDE
Controller (rev 02)
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family)
Thermal Subsystem (rev 02)
01:00.0 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge A (rev
09)
01:00.1 PIC: Intel Corporation 6700/6702PXH I/OxAPIC Interrupt Controller A (rev
09)
01:00.2 PCI bridge: Intel Corporation 6700PXH PCI Express-to-PCI Bridge B (rev
09)
01:00.3 PIC: Intel Corporation 6700PXH I/OxAPIC Interrupt Controller B (rev 09)
03:02.0 Ethernet controller: Digium, Inc. Wildcard TE122 single-span T1/E1/J1
card (rev 11)
04:00.0 RAID bus controller: 3ware Inc 9650SE SATA-II RAID (rev 01)
05:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI
Bridge (rev 03)
06:08.0 Ethernet controller: Digium, Inc. Wildcard AEX800 8-port analog card
(PCI-Express) (rev 11)
0d:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet
Controller (Copper) (rev 03)
0f:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet
Controller
11:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02)

dahidi 2.2.0.2 compiles fine. I am running Gentoo x64.
The Service starts fine.

lsmod |grep dahdi

dahdi_echocan_mg2       4864  0
dahdi_vpmadt032_loader   176560  0
dahdi_voicebus         28928  2 dahdi_vpmadt032_loader,wcte12xp
dahdi                 185616  3 dahdi_echocan_mg2,wcte12xp,dahdi_voicebus

Wem starting asterisk 1.6.1.9 I get the message:

.......Asterisk has detected a problem with your DAHDI configuration and will
shutdown for your protection.  You have options:
        1. You only have to compile DAHDI support into Asterisk if you need it. 
One option is to recompile without DAHDI support.
        2. You only have to load DAHDI drivers if you want to take advantage of
DAHDI services.  One option is to unload DAHDI modules if you don't need
them.


cat /etc/dahdi/system.conf
# Autogenerated by /usr/sbin/dahdi_genconf on Mon Nov 16 11:46:50 2009
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Span 1: WCT1/0 "Wildcard TE122 Card 0" (MASTER) HDB3/CCS ClockSource
span=1,1,0,ccs,hdb3,crc4
# termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31

# Global data

loadzone        = de
defaultzone     = de

cat /etc/asterisk/chan_dahdi.conf
[channels]
language=de
group=1
signalling=pri_net
switchtype=euroisdn
context=default
;rxgain=-4.0
;txgain=-4.0
channel => 1-15,17-31
pridialplan=unknown
echocancel=yes


What can I do?

Thanks, Oliver


------------------------------------------
Schr?der Assistance und Consulting GmbH
Lohdiecksweg 6
59457 Werl
Fon 02922-8037-490
Fax 02922-8037-540
------------------------------------------    
Sitz der Gesellschaft: Werl
HRB 6747 Amtsgericht Arnsberg
Gesch?ftsf?hrer: Lutz Schr?der
Steuernummer: 5343/5708/1703
------------------------------------------

Oliver,

 Without any experience with Asterisk 1.6.1.x here it goes:

 - Is your signalling=pri_net correct or should it be pri_cpe ?

 - I'm having myself some issues with DAHDI 2.2.0.2 + TE121
   which, I reckon, is equal to your TE122 apart from the
   bus interface (PCIe vs PCI) -- see the thread about DAHDI
   and odd idle system load for references to two issues on
   the bugtracker (this comes mostly as a FYI as I woudn't
   say your issue is related to it).

 Cheers,
--
 exvito