search for: 82573l

...of the machine. :( I have two Intel Gigabit Ethernet NICs on board (Supermicro-based Server), quoting lspci (full output see at the end of the email): 0d:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03) 0f:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller While the first device (seen as eth0) does *not* allow to set a different MTU (tried with 1576 and 1546, both values I could use; I am forced to use values >1500 here due to protocol stuff), the second works without a problem. dmesg shows: eth0: Unsupported MTU set...

Hi list, Im having a problem with intel 82573L Gigabit Ethernet Controller. Centos 4.2 can't detect this internal ethernet port my motherboard is an Intel Desktop Board D945PSN. when i type lspci the ethernet is identified but when i type dmesg i can't see the ethernet port. -- Regards, Mark Quitoriano, CCNA Fan the flame... http:...

Op 20-09-2007 om 08:31 schreef St?phane ARQUER: > "previous" > > [ 'elf.c32' booting a RTEMS ELF binary ] > > - P4 2GHz 512M with a 3c905c PXE v2.20 > PXELINUX doesn't work with this one > > - P4 3GHz 2048M with an Intel 82573L gigabit eth PXE > PXELINUX works on this machine > > - HP kayak P3 866MHz with PXE v2.20 > PXELINUX doesn't work with this one I wonder if PXELINUX also fails to boot a Linux kernel. Or should the 'works/works not' be read for 'KERNEL elf.c32' and 'APPEND rte...

...ation 82801HO (ICH8DO) LPC Interface Controller (rev 02) 00:1f.2 IDE interface: Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller (rev 02) 02:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller 03:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller 04:0c.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) 04:0d.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01) 04:0e.0 Communication controller: Comtrol Corpo...

...nterfaces. Choose the one to use as the primary network interface during the installation. If possible, the first connected network interface found has been selected. Primary network interface: 1. eth0: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) [*] 2. eth1: Intel Corporation 82573L Gigabit Ethernet Controller Prompt: '?' for help, default=1> [[[[...................]]]] If you choose guided partitioning for an entire disk, you will next be asked which disk should be used. Partitioning method: 1. Guided - use entire disk 2. Guided - use entire disk and set up LVM...

...t 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.0 to 64 Here is my lpci output from DomU : 00:00.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01) 00:01.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller (rev 01) Here are some dmesg lines from DomU : usbcore: registered new driver usbfs usbcore: registered new driver hub Intel(R) PRO/1000 Network Driver - version 7.1.9-k4-NAPI Copyright (c) 1999-2006 Intel Corporation. PCI: Enabling device 0000:00:01.0 (0000 ->...

Which is the best laptop to run centos on and where can I buy one without Windows Vista pre loaded cause I will uninstall it any way. Please tell me the best sites that ship worldwide.

...ernet. My OS is Centos 6.7, and the version of?Network?manager is Applet 0.8.1. When clinking the ?Network?manager icon at the upper right conner at the Desktop of my compuer, I can see in the?pop-up?manu that there are two network ?cards (Intel 82573E Gigabit Ethernet Controller (Copper) and Intel 82573L Gigabit Ethernet Controller)?but?only one link (System eth1) available. Usually when clicking the "System eth1" the Internet connection would be established. However from this morning?clicking the "System eth1" only gives connect failure information. I don't know whether thi...

...000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) 06:08.0 Ethernet controller: Digium, Inc. Wildcard AEX800 8-port analog card (PCI-Express) (rev 11) 0d:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03) 0f:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller 11:04.0 VGA compatible controller: ATI Technologies Inc ES1000 (rev 02) dahidi 2.2.0.2 compiles fine. I am running Gentoo x64. The Service starts fine. lsmod |grep dahdi dahdi_echocan_mg2 4864 0 dahdi_vpmadt032_loader 176560 0 dahdi_voicebus 28928 2...

Hi, I noticed that network connection of one of my boxes got significantly slow just after upgrading it to 8.0R. The box has an em0 (82547EI) and worked fine with 7.2R. The symptoms are: - A ping to a host on the same LAN takes 990ms RTT, it reduces gradually to around 1ms, and then it returns to around 1s. The rate was about 2ms/ping. - The response is quite slow, but no packet

Hi, is it possible to use a usb isdn modem in a guest, I''m using the standard xen on SLES10. Which changes should I make in the guest config file? The modem is a usb isdn modem from fritz. Regards Marcus _______________________________________________ Xen-users mailing list Xen-users@lists.xensource.com http://lists.xensource.com/xen-users

...s: Intel Corporation NM10/ICH7 Family SMBus Controller (rev 02) 01:00.0 VGA compatible controller: NVIDIA Corporation G72M [GeForce Go 7400] (rev a1) 02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02) 05:00.0 Ethernet controller: Intel Corporation 82573L Gigabit Ethernet Controller 07:05.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller 07:05.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19) 07:05.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a) 07:05.3 System peripher...