search for: 82557

HI zytor, I hope you can help me. I have above network chipset on a Mitsubishi im-2000 mobo. I don't see an actual chip on the mobo w/ this ID so I suspect it embedded in the mobo BIOS or in one of the 3 Intel chips. I am attempting to use LTSP to boot a workstation w/ above NIC chipset. It has imbedded boot to net software (Intel Landesk service agt v.99b) using PXE. I can't get it

...iation of one > of these hosts with and without this option? > > -hpa I have the same problem (Thanks Gal!) and since I didn't see an answer to hpa's question, made tcpdumps. Client is 193.110.157.25, dhcp/tftp-hpa server is 193.110.157.30. *ware used: Intel eepro/100+ (82557/8/9 rev 9, board assembly 748564-005, romchecksum 0xdb8681d) syslinux 1.76-1.i386.rpm intel boot agent 2.6 build 004 intel undi pxe-2.0 build 071 tftp-hpa-0.30 ISC dhcpd V3.0pl1 tcpdumps are at: http://www.xtdnet.nl/paul/pxe/ Paul

....0 System peripheral: Compaq Computer Corporation Advanced System Management Controller 00:05.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC 215IIC [Mach64 GT IIC] (rev 7a) 00:06.0 PCI bridge: IBM PCI to PCI Bridge (IBM27-82351) (rev 07) 00:09.0 Ethernet controller: Intel Corporation 82557/8/9 Ethernet Pro 100 (rev 05) 00:0f.0 ISA bridge: Broadcom OSB4 South Bridge (rev 4d) 00:11.0 Host bridge: Broadcom CNB20-LE Host Bridge (rev 04) 00:11.1 Host bridge: Broadcom CNB20-LE Host Bridge (rev 02) 01:00.0 Mass storage controller: Compaq Computer Corporation Smart-2/P RAID Controller (rev 0...

...get garbage characters and then it locks up. See the end of this message to see someone who had a similar problem. Motherboard: Intel S845wd1-e Bios: 8.0 Intel Boot Agent 4.1.08 PXE-2.1 (Build 083) syslinux versions tried: 1.76,2.00-pre14,2.00,2.01-pre3 02:0c.0 Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 0d) Subsystem: Intel Corp.: Unknown device 301a Flags: bus master, medium devsel, latency 32, IRQ 11 Memory at feafe000 (32-bit, non-prefetchable) [size=4K] I/O ports at de80 [size=64] Memory at fea80000 (32-bit, non-prefetchable)...

we would like setup VLAN on CENTOS 5.X and 4.x. Only VLAN will active, but primary LAN NOT active. E.g "eth0" inactive, but "eth0.2" active. I have been tried several ways, but never successful. Any ideal? ______________________________________________________________________________________________________ ?????????Yahoo!??????2.0?????????????

...t or does it need to be to see the card? Thanks, Bart Here's what I know: Processors 1 Model Pentium III (Katmai) CPU Speed 551.37 MHz Cache Size 512 KB System Bogomips 1103.57 PCI Devices - Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI - Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] - Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge - IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE - ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA - PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge - USB Contro...

...e network cards or hub. also there are very few collisions. Well, here are the specs for my server system, and the client Linux server Linux 2.2.5 based on Slackware 3.6 distro PII 300 with 64 Meg RAM Buslogic SCSI controler with 7200RPM 9.1 G IBM disk Intel Etherexpress Pro + 10/100 (Intel 82557) Samba 2.0.3 Win 95 Client Win95b Celeron 300A with 64Meg RAM 7200 RPM IDE disk using standard GX chipset IDE controler 3Com 905b TX 10/100 NIC with v4.1 of the 3com drivers TCP/IP is the only protocal installed currently, although I also tried with the NETBEUI protocal installed, but there...

Hi, I've mostly set up a kickstart for RedHat 8.0. I'm using the instructions posted by Alf W. : http://www.stanford.edu/~alfw/PXE-Kickstart/PXE-Kickstart.html The whole thing works, except when I go to reboot the system it hangs. ie. TFTP Prefix: Trying to load: pxelinux.cfg/AABBCCDD Trying to load: pxelinux.cfg/AABBCCD Trying to load: pxelinux.cfg/AABBCC Trying to load:

...INT 16 interface pcib0: <ServerWorks host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 pcib4: <PCI to PCI bridge (vendor=1166 device=0009)> at device 0.1 on pci0 pci1: <PCI bus> on pcib4 pci1: <ATI Mach64-GM graphics accelerator> at 0.0 irq 11 fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xc800-0xc83f mem 0xfe800000-0xfe8fffff,0xfeafb000-0xfeafbfff irq 7 at device 4.0 on pci0 fxp0: Ethernet address 00:30:48:10:6b:9e inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto ahc...

...23) 00:00.1 PCI bridge: Broadcom (formerly ServerWorks) CNB20LE Host Bridge (rev 01) 00:00.2 Host bridge: Broadcom (formerly ServerWorks) CNB20HE Host Bridge (rev 01) 00:00.3 Host bridge: Broadcom (formerly ServerWorks) CNB20HE Host Bridge (rev 01) 00:04.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 08) 00:05.0 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) 00:05.1 SCSI storage controller: Adaptec AIC-7899P U160/m (rev 01) 00:06.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 08) 00:0f.0 ISA bridge: Broadcom (formerly ServerW...

...clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt 3dnowext 3dnow pni hypervisor cmp_legacy svm extapic cr8_legacy CPU: Features: 00002001-178bfbff-0000001f-ebd3fbff CPU: Features Maskable: no Memory: 4G Disks: 1 Disk 1: 120G NICs: 3 NIC 1: 00:04.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 10) NIC 2: 04:04.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03) NIC 3: 04:04.1 Ethernet controller: Broadcom Corporation NetXtreme BCM5780 Gigabit Ethernet (rev 03) NICs on NPRI: 1 Resource string: memory=4G/sockets=2/cores=...

Hi, More than 1000''s of classes and filters gets created/deleted in run time. Are we doing it correctly( as our requirement is such). Since few days we are facing lots of problems, like the server gets hanged, we get some junk messages in our logs. we have to reboot our server every now and then. What is the max limit of classes/filters can be created. we are using redhat 7.3.

I've spent the past four days or so updating machines here to 4.8/9-stable via cvsup, and have done a complete make buildworld/kernel on each machine (some SMP, some single processor). It seems something is broken with the latest fxp driver, on each machine (different mobos and hardware configs) heavy network traffic with fxp NICs causes timeouts and random kernel panics. First machine to

Hello all..... I would like to know if anyone here has had good experience with this Supermicro motherboard.....http://supermicro.com/products/motherboard/P4/E7221/P8SCT.cfm I am thinking about using it in an entry level mail and file server with a 3ware card and 200 GB SATA drives. Cost is a factor here otherwise I would go for an Opteron board instead. JC

...(rev 02) 0000:00:02.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) 0000:00:02.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) 0000:00:02.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02) 0000:00:03.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 05) 0000:00:10.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface 0000:00:14.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface 0000:01:01.0 VGA compatible controller: S3 Inc. Trio 64 3D (rev 01) As you c...

...(845G GMCH) SVGA controller> mem 0xd8d00000-0xd8d7ffff,0xd0000000-0xd7ffffff irq 12 at device 2.0 on pci0 agp0: detected 892k stolen memory agp0: aperture size is 128M pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 pci1: <PCI bus> on pcib1 fxp0: <Intel 82557/8/9 EtherExpress Pro/100(B) Ethernet> port 0xc000-0xc01f mem 0xd8800000-0xd88fffff,0xd8c00000-0xd8c00fff irq 12 at device 0.0 on pci1 fxp0: Ethernet address 00:a0:c9:e7:a6:e6 inphy0: <i82555 10/100 media interface> on miibus0 inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto f...

...Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller (rev 02) 0a:00.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) 0a:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [root@xen avinash]# lscpu Architecture: i686 CPU(s): 2 Thread(s) per core: 1 Core(s) per socket: 2 CPU socket(s): 1 Vendor ID:...

...Intel Corporation 82801H (ICH8 Family) 4 port SATA IDE Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 00:1f.5 IDE interface: Intel Corporation 82801H (ICH8 Family) 2 port SATA IDE Controller (rev 02) 0a:00.0 Ethernet controller: Intel Corporation 82557/8/9/0/1 Ethernet Pro 100 (rev 08) 0a:03.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [root@xen avinash]# lscpu Architecture: i686 CPU(s): 2 Thread(s) per core: 1 Core(s) per socket: 2 CPU socket(s): 1 Vendor ID:...

...er [0106]: Intel Corporation 6 port SATA AHCI Controller [8086:2922] (rev 02) 00:1f.3 SMBus [0c05]: Intel Corporation SMBus Controller [8086:2930] (rev 02) 01:00.0 VGA compatible controller [0300]: ATI Technologies Inc Unknown device [1002:94c3] 03:00.0 Ethernet controller [0200]: Intel Corporation 82557/8/9 [Ethernet Pro 100] [8086:1229] (rev 05) _______________________________________________ Xen-devel mailing list Xen-devel@lists.xensource.com http://lists.xensource.com/xen-devel

...on 2: USB Controller: Intel Corp. 82801AA USB (rev 2). IRQ 10. I/O at 0xef80 [0xef9f]. Bus 0, device 31, function 3: SMBus: Intel Corp. 82801AA SMBus (rev 2). IRQ 9. I/O at 0xefa0 [0xefaf]. Bus 1, device 1, function 0: Ethernet controller: Intel Corp. 82557/8/9 [Ethernet Pro 100] (rev 8). IRQ 10. Master Capable. Latency=64. Min Gnt=8.Max Lat=56. Non-prefetchable 32 bit memory at 0xff8fe000 [0xff8fefff]. I/O at 0xdf00 [0xdf3f]. Non-prefetchable 32 bit memory at 0xff700000 [0xff7fffff]. Bus 1, device 9, function 0:...