search for: 6482

...0.0 (using NUT 2.6.3). This looks similar to the case I mentioned earlier[1], and in order to try and fix that, it would be good to know if this is limited to a specific protocol number, or if protocol 3016 might be patched in the future. [1] http://thread.gmane.org/gmane.comp.monitoring.nut.devel/6482 * Were the variables like ups.delay.shutdown verified to be mapped correctly in NUT? I see that they read back, but there is certainly a possibility that we are not mapping the names to the proper HID usage IDs. "Mike." asked a little about this particular variable earlier in the thread...

...differentiate between various generations of the hardware (for instance, at some point the SMART2200RMXL2U changed from the proprietary serial-over-HID to standard PDC HID). Also, we occasionally run across cosmetic errors in the output data: http://thread.gmane.org/gmane.comp.monitoring.nut.devel/6482 While this shouldn't affect the shutdown sequence, we do try to correct the returned measurements if we can identify a good algorithm. If all of the voltages are in microvolts (including the config voltages), we can apply a multiplier across the board. But if only some of the exponents are wro...

OS = NAS4Free (FreeBSD Revision: 199506) NUT Version = 2.7.3 for other parts of NUT version is listed below NUT is part of the NAS4Free distribution Device = Tripp Lite SMART1300LCDT URL http://www.tripplite.com/line-interactive-ups-system-desktop-tower-1300va-120v-usb-port-lcd-screen~SMART1300LCDT/ PROBLEM: NUT is ABLE to see the UPS BUT it is not getting the right(?) descriptor? I am using

...differentiate between various generations of the hardware (for instance, at some point the SMART2200RMXL2U changed from the proprietary serial-over-HID to standard PDC HID). Also, we occasionally run across cosmetic errors in the output data: http://thread.gmane.org/gmane.comp.monitoring.nut.devel/6482 While this shouldn't affect the shutdown sequence, we do try to correct the returned measurements if we can identify a good algorithm. If all of the voltages are in microvolts (including the config voltages), we can apply a multiplier across the board. But if only some of the exponents are wro...

...016), usbhid-ups is the correct driver. > According to http://www.networkupstools.org/ddl/Tripp_Lite/SMART1300LCDT.html. It was ?verified? working with NUT version 2.6.4 In a message on nut-upsdev, Marco Walther just cited this thread: http://thread.gmane.org/gmane.comp.monitoring.nut.devel/6482 which mentions that the UPS works on Debian Linux 7.1. Marco's patch is against NUT 2.7.3, and it just corrects some scaling of the variables, so it would have gotten well past the problem you mentioned. It sounds like this might be an issue with the FreeBSD USB stack. I am not familiar with N...

...M, Marco Walther <marco at sonic.net> wrote: > Hi, > > I just decided to fix some scaling issues for my UPS (TRIPP-LITE SMART1500LCDT). Apparently that issue existed for some time (and I knew about it as well:-() > > See http://thread.gmane.org/gmane.comp.monitoring.nut.devel/6482 for a thread. > > My little patch is attached (against 2.7.3). It seems to be working better for me but I don't have any other TRIPP-LITE's to test that I did not break anything:-( So, please check it! Hi Marco, Thanks for the patch. I'm switching this to the nut-upsuser list t...

...r lahk that before... Any ideas? I appreciate all the help that y'all are willing to give this poor dumb biologist... Thanks in advance, Chris -- damour@enrmo2.gordon.army.mil USASC & Fort Gordon, ATZH-DIE (Mr. Damour) damourc@emh.gordon.army.mil Fort Gordon, GA 30905-5040 706-791-6482 check out: All mispellings and typographical errors are http://enrmo2.gordon.army.mil randomly inserted by a program to confuse anti-democracy forces. (Honest!)

Send CentOS-announce mailing list submissions to centos-announce at centos.org To subscribe or unsubscribe via the World Wide Web, visit http://lists.centos.org/mailman/listinfo/centos-announce or, via email, send a message with subject or body 'help' to centos-announce-request at centos.org You can reach the person managing the list at centos-announce-owner at centos.org When

...5642 5647 5666 5668 5687 5696 5700 5736 5740 5749 5764 5783 5809 5814 5853 5866 5867 5877 5888 5895 5896 5897 5898 5899 5908 5910 5911 5912 5939 5950 5958 5990 6000 6059 6074 6095 6097 6112 6137 6141 6189 6193 6212 6228 6229 6233 6271 6273 6275 6285 6310 6317 6335 6383 6384 6397 6427 6430 6459 6463 6482 6492 6506 6565 6585 6620 6670 6673 6675 6705 6715 6716 6741 6812 6826 6852 6859 6895 6896 6907 6913 6919 6935 6943 6948 6979 7023 7025 7035 7039 7042 7108 7131 7145 7163 7171 7172 7194 7198 7199 7203 7256 7257 7294 7303 7317 7322 7343 7344 7347 7348 7352 7386 7390 7391 7392 7393 7407 7408 7409 7417...

...5668 5687 5696 5700 5736 5740 5749 5764 5783 5809 5814 5853 5866 5867 > 5877 5888 5895 5896 5897 5898 5899 5908 5910 5911 5912 5939 5950 5958 5990 > 6000 6059 6074 6095 6097 6112 6137 6141 6189 6193 6212 6228 6229 6233 6271 > 6273 6275 6285 6310 6317 6335 6383 6384 6397 6427 6430 6459 6463 6482 6492 > 6506 6565 6585 6620 6670 6673 6675 6705 6715 6716 6741 6812 6826 6852 6859 > 6895 6896 6907 6913 6919 6935 6943 6948 6979 7023 7025 7035 7039 7042 7108 > 7131 7145 7163 7171 7172 7194 7198 7199 7203 7256 7257 7294 7303 7317 7322 > 7343 7344 7347 7348 7352 7386 7390 7391 7392 7393...

Hello, My name is Eric Cobb and I am a Product Specialist with Tripp Lite. We have tested your latest NUT distributions against our HID USB compatible UPS systems and would like to know what is needed and/or who is needed to contact in order to updated the listing of compatible Tripp Lite UPS systems in your HCL list? Best Regards, Eric K. Cobb Product Management Specialist [Tripp Lite] 1111

...h no ACL support. * BUG 11703: s3: smbd: Fix timestamp rounding inside SMB2 create. * BUG 11742: lib: tevent: Fix memory leak when old signal action restored. * BUG 11771: lib: tevent: Fix memory leak when old signal action restored. o Christian Ambach <ambi at samba.org> * BUG 6482: s3:utils/smbget: Fix recursive download. o Andrew Bartlett <abartlet at samba.org> * BUG 11780: smbd: Only check dev/inode in open_directory, not the full stat(). * BUG 11789: build: Mark explicit dependencies on pytalloc-util. o Ralph Boehme <slow at samba.org> * BU...

...h no ACL support. * BUG 11703: s3: smbd: Fix timestamp rounding inside SMB2 create. * BUG 11742: lib: tevent: Fix memory leak when old signal action restored. * BUG 11771: lib: tevent: Fix memory leak when old signal action restored. o Christian Ambach <ambi at samba.org> * BUG 6482: s3:utils/smbget: Fix recursive download. o Andrew Bartlett <abartlet at samba.org> * BUG 11780: smbd: Only check dev/inode in open_directory, not the full stat(). * BUG 11789: build: Mark explicit dependencies on pytalloc-util. o Ralph Boehme <slow at samba.org> * BU...

...reinstall the os, on, and I have no idea how to do it, they sent me syslinux, but I have no idea what kernel to use, or really how to install it using syslinux. Please, any help will be appreciated. Scott Latta Network Administrator Techsupport Supervisor Nexity Bank A+, NET+, MCP 205-298-6482

...7c7a-4f79-a3fe-29f5c80399f7 Last attempt @ Sat Jun 6 00:38:22 2020 CEST failed, result 1326 (WERR_LOGON_FAILURE) 11204 consecutive failure(s). Last success @ NTTIME(0) ==== KCC CONNECTION OBJECTS ==== Connection -- Connection name: 5ebc1174-6482-429e-a86f-05bfbbca5b43 Enabled : TRUE Server DNS name : dc2.samdom.example.com Server DN name : CN=NTDS Settings,CN=DC2,CN=Servers,CN=Default-First-Site-Name,CN=Sites,CN=Configuration,DC=samdom,DC=example,DC=com TransportType: RPC opti...

...NETWRX1: The credentials supplied conflict with an existing set of credentials" SO what am I missing here or doing wrong?? I'm sure its simple but I can't see it. Thanks in advance, George ===[George R. Kasica]=== +1 262 513 8503 President +1 206 374 6482 FAX Netwrx Consulting Inc. Waukesha, WI USA http://www.netwrx1.com georgek@netwrx1.com ICQ #12862186

...opped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:46331 (45.2 Kb) TX bytes:46754 (45.6 Kb) eth0 Link encap:Ethernet HWaddr 00:06:5B:ED:64:82 inet addr:10.182.12.21 Bcast:10.255.255.255 Mask:255.255.240.0 inet6 addr: fe80::206:5bff:feed:6482/64 Scope:Link UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:72262772 errors:0 dropped:0 overruns:0 frame:0 TX packets:7567548 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:2437020880 (2324.1 Mb...

Hi, I just decided to fix some scaling issues for my UPS (TRIPP-LITE SMART1500LCDT). Apparently that issue existed for some time (and I knew about it as well:-() See http://thread.gmane.org/gmane.comp.monitoring.nut.devel/6482 for a thread. My little patch is attached (against 2.7.3). It seems to be working better for me but I don't have any other TRIPP-LITE's to test that I did not break anything:-( So, please check it! Thanks, -- Marco -------------- next part -------------- A non-text attachment was scru...

Hi, I just decided to fix some scaling issues for my UPS (TRIPP-LITE SMART1500LCDT). Apparently that issue existed for some time (and I knew about it as well:-() See http://thread.gmane.org/gmane.comp.monitoring.nut.devel/6482 for a thread. My little patch is attached (against 2.7.3). It seems to be working better for me but I don't have any other TRIPP-LITE's to test that I did not break anything:-( So, please check it! Thanks, -- Marco -------------- next part -------------- A non-text attachment was scru...

Hi, I'm trying to compile samba 3.0.23d for use with ldap as backend. The system is Debian Sarge fresh installed, all updates installed, and openldap-2.3.27 installed from sources. I searched a lot but couldn't google out anythink that helped. I sent this same mail jesterday with configure options for ldap, ld.so.conf and samba error.log but it was too long. So another time with less