Displaying 20 results from an estimated 61 matches for "63s".
Did you mean:
631
2003 May 13
1
4.8-RELEASE not identifying scsi drives
...t 8 drives but 5 in total in a mix between the
channels, see below.
da0 at sym0 bus 0 target 0 lun 0
da0: <COMPAQ AB00931B92 3AS8> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing
Enabled
da0: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C)
da4 at sym1 bus 0 target 4 lun 0
da4: <COMPAQ MAB3091SC 0814> Fixed Direct Access SCSI-2 device
da4: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing
Enabled
da4: 8678MB (17773500 512 byte sectors: 255H 63S/T 1106C)
da2 at sym0 bus 0 target 2 lun 0
da2: <COMPAQ...
2003 Dec 18
0
Partial deadlock in 4.9p1
...1000 2> Fixed Processor SCSI-2 device
pass15: 3.300MB/s transfers
da0 at sym0 bus 0 target 0 lun 0
da0: <COMPAQ BB00911CA0 3B07> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing Enabled
da0: 8678MB (17773524 512 byte sectors: 255H 63S/T 1106C)
da1 at isp0 bus 0 target 0 lun 0
da1: <SEAGATE ST34501WCSUN4.2G 0558> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 4094MB (8385121 512 byte sectors: 255H 63S/T 521C)
da2 at isp0 bus 0 target 1 lun 0
da2: <S...
2011 Oct 21
2
Modify memdisk to mask/overlay start of hard drive
I have a somewhat unique problem I am trying to solve that requires me
to temporarily replace the first 63s of the main hard drive and boot
the result. Basically, I am hoping it is possible to modify memdisk to
serve requests for the first 63 sectors from a ram disk and pass other
requests through to the hard drive. There will never be a read
spanning the two, so I don't need it to be able to handle...
2013 Mar 05
2
make_dev_physpath_alias
...HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
ada0 at ahcich0 bus 0 scbus1 target 0 lun 0
ada0: <INTEL SSDSA2CT040G3 4PC10362> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 38166MB (78165360 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
ada1 at ahcich1 bus 0 scbus2 target 0 lun 0
ada1: <INTEL SSDSA2CT040G3 4PC10362> ATA-8 SATA 2.x device
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 38166MB (78165360 512 byte sectors: 16H 63S/T 16...
2008 Jun 26
1
gmirror+gjournal: unable to boot after crash
...inally, while building some port it won't boot for no reason obvious to me.
This is what I get with kernel.geom.mirror.debug=2:
ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire
ad4: 476940MB <SAMSUNG HD501LJ CR100-13> at ata2-master SATA300
ad4: 976773168 sectors [969021C/16H/63S] 16 sectors/interrupt 1 depth queue
GEOM: new disk ad4
ad4: nVidia check1 failed
ad4: Adaptec check1 failed
ad4: LSI (v3) check1 failed
GEOM_MIRROR[2]: Tasting ad4.
ad4: LSI (v2) check1 failed
magic: GEOM::MIRROR
version: 4
name: gm0
mid: 2403671335
did: 1321347210...
2006 Mar 30
5
boot problem in HP Proliant ML370 G4
Hi,
I have strange problem when booting FreeBSD-6.x in HP Proliant ML370 G4.
The problem is "-" appears on the screen and it never boots unless
somebody hits the
"Enter" key. Sometimes even PS2 keyboard doesn't respond during that
time. Tried with
USB keyboard, same problem.
The machine has dual Xeon 3.2 GHz, 1GB of RAM and LSI Logic
(mpt-5.0.5.20.00 bios) LSI1030-IT
2012 Apr 30
1
FreeBSD 9 "gptboot: invalid backup GPT header" error (boots fine though)
...gacy INTx
tws0: Controller details: Model 9750-8i, 8 Phys, Firmware FH9X
5.12.00.007, BIOS BE9X 5.11.00.006
da0 at tws0 bus 0 scbus0 target 0 lun 0
da0: <LSI 9750-8i DISK 5.12> Fixed Direct Access SCSI-5 device
da0: 6000.000MB/s transfers
da0: 2860992MB (5859311616 512 byte sectors: 255H 63S/T 364725C)
Let me know anyone wants to see anything else/has seen this/has any
theories!
--
Adam Strohl
A-Team Systems
http://ateamsystems.com/
2012 Oct 08
2
time keeps on slipping... slipping...
...): CAM status: Invalid Target ID
(probe7:hpt27xx0:0:7:0): Error 22, Unretryable error
[lots more hpt27xx probe lines through 254 deleted]
da0 at hpt27xx0 bus 0 scbus8 target 0 lun 0
da0: <HPT DISK 0_0 4.00> Fixed Direct Access SCSI-0 device
da0: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da1 at hpt27xx0 bus 0 scbus8 target 1 lun 0
da1: <HPT DISK 0_1 4.00> Fixed Direct Access SCSI-0 device
da1: 2861588MB (5860533168 512 byte sectors: 255H 63S/T 364801C)
da2 at hpt27xx0 bus 0 scbus8 target 2 lun 0
da2: <HPT DISK 0_2 4.00> Fixed Direct Access SCSI-0 device
da2...
2010 Oct 22
1
Howto align partitions in Linux + NetApp
Hi,
NetApp support has suggested us aligning partitions to improve
performance, in short: starting sector must be divisible by 8. How can I
move the start point in a misaligned partition -in production, with
ext3- under Linux?
A screenshot with a misaligned (start=63s) and aligned (start=64s)
partition is available at:
http://filesocial.com/lkwvvn2
(If anyone is interested in this topic, NetApp has a good document
explaining performance issues in misaligned partitions: "Best Practices
for File System Alignment in Virtual Environments", http://goo...
2009 Mar 31
6
RELENG_7 ata panic on atacontrol attach
Hi there colleagues,
atapci3: <nVidia nForce MCP55 SATA300 controller> port
0xbc00-0xbc07,0xb880-0xb883,0xb800-0xb807,0xb480-0xb483,0xb400-0xb40f mem
0xefcb3000-0xefcb3fff irq 23 at device 5.2 on pci0
atacontrol detach ata7
- insert ATA disk (ad14)
atacontrol attach ata7
pinics with Fatal trap 12: page fault while in kernel mode
(kgdb) bt
#0 doadump () at pcpu.h:196
#1 0xc0533227
2013 Nov 14
0
[ler@lerctr.org: 10-BETA3: Bad negotiation on AHD controller]
...ronous transfers
da0 at ahd0 bus 0 scbus0 target 0 lun 0
da0: <FUJITSU MAW3147NC 0104> Fixed Direct Access SCSI-3 device
da0: Serial Number DAA0P7A054GD
da0: 320.000MB/s transfers (160.000MHz DT, offset 127, 16bit)
da0: Command Queueing enabled
da0: 140272MB (287277984 512 byte sectors: 255H 63S/T 17882C)
cd0 at ata1 bus 0 scbus3 target 1 lun 0
cd0: <MATSHITA DVD-ROM SR-8177 NE16> Removable CD-ROM SCSI-0 device
cd0: 33.300MB/s transfers (UDMA2, ATAPI 12bytes, PIO 65534bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present
da2 at ahd0 bus 0 scbus0 target 2 lun...
2003 May 13
0
Health monitoring
...aiting 15 seconds for SCSI devices to settle
Mounting root from ufs:/dev/da0s1a
da1 at ahc1 bus 0 target 0 lun 0
da1: <transtec > Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 16, 16bit), Tagged Queueing
Enabled
da1: 293210MB (600494080 512 byte sectors: 255H 63S/T 37379C)
da0 at ahc0 bus 0 target 0 lun 0
da0: <SEAGATE ST39236LC 0010> Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 31, 16bit), Tagged Queueing
Enabled
da0: 8761MB (17942584 512 byte sectors: 255H 63S/T 1116C)
2013 Nov 03
1
FreeBSD 10 Beta 2: make installkernel failure with installer provided ZFS configuration.
...1.00, addr 1> on usbus3
ada0 at ahcich0 bus 0 scbus8 target 0 lun 0
ada0: <Maxtor 7V300F0 VA111630> ATA-7 SATA 2.x device
ada0: Serial Number V601GADG
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 286188MB (586114704 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad20
ada1 at ahcich1 bus 0 scbus9 target 0 lun 0
ada1: <Maxtor 7V300F0 VA111630> ATA-7 SATA 2.x device
ada1: Serial Number V601G9DG
ada1: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 286188MB (586114704 512...
2003 Apr 26
1
Maxtor 5000XT Firewire/USB2 Drive
...1 chowder /kernel: da0 at sbp0 bus 0 target 0 lun 0
Apr 26 09:22:51 chowder /kernel: da0: <Oxford 911D 0037> Fixed Simplified Direct Access SCSI-4 device
Apr 26 09:22:51 chowder /kernel: da0: 50.000MB/s transfers
Apr 26 09:22:51 chowder /kernel: da0: 190734MB (390625000 512 byte sectors: 255H 63S/T 24315C)
Would this imply the Maxtor is saying it isn't an SBP device?
I do not have the latest MFC firewire code, and I will be trying that next, but I thought I'd
send a heads up first and see if anyone has tried this before :)
According to this page http://www.linux1394.org/cgi-bin/v...
2003 Sep 29
3
Frequent reboots...
Hello,
I am having a problem with a new server running FreeBSD 4.9-PRERELEASE.
Once every two days or so, it reboots itself.. there is no exact time of the day it reboots..
It rebooted itself at 4:25 PM EDT on 9/25, and 3:05 AM EDT on 9/29 (today).
I thought it's the bad memory or some sort, so I've been running memtest today and memtest reports no sign of trouble with the memory...
2007 Dec 27
2
Failure of gvinum after panic
...2 device
ses0: 3.300MB/s transfers
ses0: SAF-TE Compliant Device
da0 at ahc1 bus 0 target 0 lun 0
da0: <IBM-PSG ST39103LC !# B227> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da0: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C)
da1 at ahc1 bus 0 target 1 lun 0
da1: <IBM-PSG DMVS09D !# 01B0> Fixed Direct Access SCSI-3 device
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing Enabled
da1: 8678MB (17774160 512 byte sectors: 255H 63S/T 1106C)
SMP: AP CPU #1 Launched!
da2 at umass-sim0...
2013 Jul 04
1
XHCI umass support breaks between r248085 and r252560 on 9-STABLE
...l: da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
Jul 4 14:40:27 twinhead kernel: da0: <Hitachi HTS542520K9SA00 BBDO> Fixed Direct Access SCSI-5 device
Jul 4 14:40:27 twinhead kernel: da0: 400.000MB/s transfers
Jul 4 14:40:27 twinhead kernel: da0: 190782MB (390721968 512 byte sectors: 255H 63S/T 24321C)
Jul 4 14:40:27 twinhead kernel: da0: quirks=0x2<NO_6_BYTE>
I can provide additional information or try patches as necessary.
Alexandre "Sunny" Kovalenko (????????? ?????????)
2003 Oct 01
1
Upgrade to 4.8 STABLE - Root mount failed: 6
...ial Access SCSI-2 device
sa0: 10.000MB/s transfers (10.000MHz, offset 16)
da0 at sym0 bus 0 target 0 lun 0
da0: <COMPAQ WDE4360S 1.52> Fixed Direct Access SCSI-2 device
da0: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing
Enabled
da0: 4094MB (8386000 512 byte sectors: 255H 63S/T 522C)
da1 at sym0 bus 0 target 1 lun 0
da1: <COMPAQ WDE4360S 1.52> Fixed Direct Access SCSI-2 device
da1: 40.000MB/s transfers (20.000MHz, offset 15, 16bit), Tagged Queueing
Enabled
da1: 4094MB (8386000 512 byte sectors: 255H 63S/T 522C)
Mounting root from ufs:/dev/da0s1a
Enter full pathnam...
2008 Jun 24
1
ata on alix/geode stopped being detcted.
hi,
latest changes in dev/ata broke this, on older -stable
...
ata0-master: pio=PIO4 wdma=UNSUPPORTED udma=UNSUPPORTED cable=40 wire
ad0: success setting PIO4 on National chip
ad0: 977MB <SanDisk SDCFB-1024 Rev 0.00> at ata0-master PIO4
on latest -stable:
ata0-master: pio=PIO4 wdma=WDMA2 udma=UNSUPPORTED cable=40 wire
and no disk.
cheers,
danny
2003 Aug 21
3
un-stable to build a stable machine
i trust i am still new in freebsd, after go through all mail and book, =
now seem to be more close, i got 3 server and a notebook to play with, =
install no problem. cvsup not problem.make buildworld not problem. make =
build kernel become,every machine i got different error code 1,=20
1-one got system full=20
2-one showing this sometime=20
>
anyone know the best way to be one time success,not